{"title":"Macap and PuqPress spare parts","description":"\u003cp\u003eService parts for \u003cstrong\u003eMacap\u003c\/strong\u003e grinders (Leo, M2e, MXD, Labo D) and for \u003cstrong\u003ePuqPress\u003c\/strong\u003e tampers from the M and Q series.\u003c\/p\u003e\n\u003cp\u003eOn the PuqPress, the tamping surfaces and guide rings are the typical wear parts – they determine how level the puck turns out in the end.\u003c\/p\u003e\n\u003cp\u003eQuestions about fit? Write to \u003ca href=\"mailto:office@coffeecoachingclub.ch\"\u003eoffice@coffeecoachingclub.ch\u003c\/a\u003e.\u003c\/p\u003e","products":[{"product_id":"display-zu-macap-m2e-leo55-4-pin","title":"Display zu MACAP M2e \u0026 LEO55 - 4 Pin","description":"\u003cp\u003e\u003cstrong\u003eFachteil, nicht für den Onlineverkauf.\u003c\/strong\u003e Entwurf für Offerten und manuelle Aufträge.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eArtikelnummer: A04420\u003c\/li\u003e\n\u003cli\u003eHerstellernummer: C00061662\u003c\/li\u003e\n\u003cli\u003eBeim Lieferanten an Lager: ja\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAbgabe nur zusammen mit dem Service oder an Fachbetriebe. Vor der Beschaffung Modell, Baujahr und Seriennummer prüfen.\u003c\/p\u003e","brand":"Macap","offers":[{"title":"Default Title","offer_id":56306357764481,"sku":"A04420","price":56.1,"currency_code":"CHF","in_stock":false}]},{"product_id":"display-zu-macap-m2e-leo55-essential-4-pin","title":"Display zu MACAP M2e \u0026 LEO55\/Essential - 4 Pin","description":"\u003cp\u003e\u003cstrong\u003eFachteil, nicht für den Onlineverkauf.\u003c\/strong\u003e Entwurf für Offerten und manuelle Aufträge.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eArtikelnummer: A04433\u003c\/li\u003e\n\u003cli\u003eHerstellernummer: C00061660\u003c\/li\u003e\n\u003cli\u003eBeim Lieferanten an Lager: ja\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAbgabe nur zusammen mit dem Service oder an Fachbetriebe. Vor der Beschaffung Modell, Baujahr und Seriennummer prüfen.\u003c\/p\u003e","brand":"Macap","offers":[{"title":"Default Title","offer_id":56306357797249,"sku":"A04433","price":128.26,"currency_code":"CHF","in_stock":false}]},{"product_id":"drucktaster-bedienrad-zu-macap-m4d","title":"Drucktaster Bedienrad zu MACAP M4D","description":"\u003cp\u003e\u003cstrong\u003eFachteil, nicht für den Onlineverkauf.\u003c\/strong\u003e Entwurf für Offerten und manuelle Aufträge.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eArtikelnummer: A03780\u003c\/li\u003e\n\u003cli\u003eHerstellernummer: C0006M104\u003c\/li\u003e\n\u003cli\u003eBeim Lieferanten an Lager: nein\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAbgabe nur zusammen mit dem Service oder an Fachbetriebe. Vor der Beschaffung Modell, Baujahr und Seriennummer prüfen.\u003c\/p\u003e","brand":"Macap","offers":[{"title":"Default Title","offer_id":56306357830017,"sku":"A03780","price":53.24,"currency_code":"CHF","in_stock":false}]},{"product_id":"drucktaster-kaffeebezug-zu-macap-labod","title":"Drucktaster Kaffeebezug zu MACAP LaboD","description":"\u003cp\u003e\u003cstrong\u003eFachteil, nicht für den Onlineverkauf.\u003c\/strong\u003e Entwurf für Offerten und manuelle Aufträge.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eArtikelnummer: A03509\u003c\/li\u003e\n\u003cli\u003eHerstellernummer: C00062003\u003c\/li\u003e\n\u003cli\u003eBeim Lieferanten an Lager: ja\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAbgabe nur zusammen mit dem Service oder an Fachbetriebe. Vor der Beschaffung Modell, Baujahr und Seriennummer prüfen.\u003c\/p\u003e","brand":"Macap","offers":[{"title":"Default Title","offer_id":56306357862785,"sku":"A03509","price":83.16,"currency_code":"CHF","in_stock":false}]},{"product_id":"power-board-zu-macap-leo-m2e","title":"Power Board zu Macap Leo\/M2e","description":"\u003cp\u003e\u003cstrong\u003eFachteil, nicht für den Onlineverkauf.\u003c\/strong\u003e Entwurf für Offerten und manuelle Aufträge.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eArtikelnummer: A04418\u003c\/li\u003e\n\u003cli\u003eHerstellernummer: C00062200 ex A03312\u003c\/li\u003e\n\u003cli\u003eBeim Lieferanten an Lager: ja\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAbgabe nur zusammen mit dem Service oder an Fachbetriebe. Vor der Beschaffung Modell, Baujahr und Seriennummer prüfen.\u003c\/p\u003e","brand":"Macap","offers":[{"title":"Default Title","offer_id":56306357993857,"sku":"A04418","price":78.87,"currency_code":"CHF","in_stock":false}]},{"product_id":"schalter-kaffeebezug-inkl-kabel-zu-macap-leo55","title":"Schalter Kaffeebezug inkl. Kabel zu Macap Leo55","description":"\u003cp\u003e\u003cstrong\u003eFachteil, nicht für den Onlineverkauf.\u003c\/strong\u003e Entwurf für Offerten und manuelle Aufträge.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eArtikelnummer: A04421\u003c\/li\u003e\n\u003cli\u003eHerstellernummer: C00062222\u003c\/li\u003e\n\u003cli\u003eBeim Lieferanten an Lager: nein\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAbgabe nur zusammen mit dem Service oder an Fachbetriebe. Vor der Beschaffung Modell, Baujahr und Seriennummer prüfen.\u003c\/p\u003e","brand":"Macap","offers":[{"title":"Default Title","offer_id":56306358026625,"sku":"A04421","price":59.07,"currency_code":"CHF","in_stock":false}]},{"product_id":"ac-dc-converter-pcb-puqpress-m1-m2-q1-q2","title":"AC-DC Converter (PCB) PuqPress M1,M2,Q1,Q2","description":"\u003cp\u003e\u003cstrong\u003eFachteil, nicht für den Onlineverkauf.\u003c\/strong\u003e Entwurf für Offerten und manuelle Aufträge.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eArtikelnummer: A02871\u003c\/li\u003e\n\u003cli\u003eHerstellernummer: 1-110-0001-1\u003c\/li\u003e\n\u003cli\u003eBeim Lieferanten an Lager: ja\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAbgabe nur zusammen mit dem Service oder an Fachbetriebe. Vor der Beschaffung Modell, Baujahr und Seriennummer prüfen.\u003c\/p\u003e","brand":"PuqPress","offers":[{"title":"Default Title","offer_id":56306358059393,"sku":"A02871","price":107.58,"currency_code":"CHF","in_stock":false}]},{"product_id":"ac-dc-converter-pcb-puqpress-mini-m3-m4-m5-m6","title":"AC-DC Converter (PCB) PuqPress Mini,M3,M4,M5,M6","description":"\u003cp\u003e\u003cstrong\u003eFachteil, nicht für den Onlineverkauf.\u003c\/strong\u003e Entwurf für Offerten und manuelle Aufträge.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eArtikelnummer: A04035\u003c\/li\u003e\n\u003cli\u003eHerstellernummer: 1-110-0154-1\u003c\/li\u003e\n\u003cli\u003eBeim Lieferanten an Lager: ja\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAbgabe nur zusammen mit dem Service oder an Fachbetriebe. Vor der Beschaffung Modell, Baujahr und Seriennummer prüfen.\u003c\/p\u003e","brand":"PuqPress","offers":[{"title":"Default Title","offer_id":56306358092161,"sku":"A04035","price":107.58,"currency_code":"CHF","in_stock":false}]},{"product_id":"puqpress-display-sticker-m3-m5-m6","title":"PuqPress Display sticker M3\/M5\/M6","description":"\u003cp\u003e\u003cstrong\u003eFachteil, nicht für den Onlineverkauf.\u003c\/strong\u003e Entwurf für Offerten und manuelle Aufträge.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eArtikelnummer: A04519\u003c\/li\u003e\n\u003cli\u003eHerstellernummer: 1-210-0275-2\u003c\/li\u003e\n\u003cli\u003eBeim Lieferanten an Lager: ja\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAbgabe nur zusammen mit dem Service oder an Fachbetriebe. Vor der Beschaffung Modell, Baujahr und Seriennummer prüfen.\u003c\/p\u003e","brand":"PuqPress","offers":[{"title":"Default Title","offer_id":56306358124929,"sku":"A04519","price":27.94,"currency_code":"CHF","in_stock":false}]},{"product_id":"puqpress-display-sticker-q2","title":"PuqPress Display sticker Q2","description":"\u003cp\u003e\u003cstrong\u003eFachteil, nicht für den Onlineverkauf.\u003c\/strong\u003e Entwurf für Offerten und manuelle Aufträge.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eArtikelnummer: A04518\u003c\/li\u003e\n\u003cli\u003eHerstellernummer: 1-210-0060-6\u003c\/li\u003e\n\u003cli\u003eBeim Lieferanten an Lager: ja\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAbgabe nur zusammen mit dem Service oder an Fachbetriebe. Vor der Beschaffung Modell, Baujahr und Seriennummer prüfen.\u003c\/p\u003e","brand":"PuqPress","offers":[{"title":"Default Title","offer_id":56306358157697,"sku":"A04518","price":27.94,"currency_code":"CHF","in_stock":false}]},{"product_id":"puqpress-drive-unit-m4-gen-5","title":"PuqPress Drive unit - M4 (GEN 5)","description":"\u003cp\u003e\u003cstrong\u003eFachteil, nicht für den Onlineverkauf.\u003c\/strong\u003e Entwurf für Offerten und manuelle Aufträge.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eArtikelnummer: A04513\u003c\/li\u003e\n\u003cli\u003eHerstellernummer: 1-310-0014-1\u003c\/li\u003e\n\u003cli\u003eBeim Lieferanten an Lager: ja\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAbgabe nur zusammen mit dem Service oder an Fachbetriebe. Vor der Beschaffung Modell, Baujahr und Seriennummer prüfen.\u003c\/p\u003e","brand":"PuqPress","offers":[{"title":"Default Title","offer_id":56306358190465,"sku":"A04513","price":226.27,"currency_code":"CHF","in_stock":false}]},{"product_id":"puqpress-drive-unit-q1-gen-5","title":"PuqPress Drive unit - Q1 (GEN 5)","description":"\u003cp\u003e\u003cstrong\u003eFachteil, nicht für den Onlineverkauf.\u003c\/strong\u003e Entwurf für Offerten und manuelle Aufträge.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eArtikelnummer: A04511\u003c\/li\u003e\n\u003cli\u003eHerstellernummer: 1-310-0001-2\u003c\/li\u003e\n\u003cli\u003eBeim Lieferanten an Lager: ja\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAbgabe nur zusammen mit dem Service oder an Fachbetriebe. Vor der Beschaffung Modell, Baujahr und Seriennummer prüfen.\u003c\/p\u003e","brand":"PuqPress","offers":[{"title":"Default Title","offer_id":56306358223233,"sku":"A04511","price":226.27,"currency_code":"CHF","in_stock":false}]},{"product_id":"puqpress-drive-unit-q2-gen-5","title":"PuqPress Drive unit - Q2 (GEN 5)","description":"\u003cp\u003e\u003cstrong\u003eFachteil, nicht für den Onlineverkauf.\u003c\/strong\u003e Entwurf für Offerten und manuelle Aufträge.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eArtikelnummer: A04512\u003c\/li\u003e\n\u003cli\u003eHerstellernummer: 1-310-0016-1\u003c\/li\u003e\n\u003cli\u003eBeim Lieferanten an Lager: ja\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAbgabe nur zusammen mit dem Service oder an Fachbetriebe. Vor der Beschaffung Modell, Baujahr und Seriennummer prüfen.\u003c\/p\u003e","brand":"PuqPress","offers":[{"title":"Default Title","offer_id":56306372903297,"sku":"A04512","price":241.34,"currency_code":"CHF","in_stock":false}]},{"product_id":"drive-unit-puqpress-motor-und-getriebe-m3-m5-m6-gen-5","title":"Drive Unit PuqPress Motor und Getriebe M3\/M5\/M6 (Gen 5)","description":"\u003cp\u003e\u003cstrong\u003eFachteil, nicht für den Onlineverkauf.\u003c\/strong\u003e Entwurf für Offerten und manuelle Aufträge.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eArtikelnummer: A04416\u003c\/li\u003e\n\u003cli\u003eHerstellernummer: 1-310-0015-1\u003c\/li\u003e\n\u003cli\u003eBeim Lieferanten an Lager: ja\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAbgabe nur zusammen mit dem Service oder an Fachbetriebe. Vor der Beschaffung Modell, Baujahr und Seriennummer prüfen.\u003c\/p\u003e","brand":"PuqPress","offers":[{"title":"Default Title","offer_id":56306372936065,"sku":"A04416","price":256.52,"currency_code":"CHF","in_stock":false}]},{"product_id":"puqpress-encoder-motor-cable-and-input-cable-controller-boeard","title":"PuqPress ENCODER motor cable and input cable controller boeard","description":"\u003cp\u003e\u003cstrong\u003eFachteil, nicht für den Onlineverkauf.\u003c\/strong\u003e Entwurf für Offerten und manuelle Aufträge.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eArtikelnummer: A04517\u003c\/li\u003e\n\u003cli\u003eHerstellernummer: 1-410-0029-4\u003c\/li\u003e\n\u003cli\u003eBeim Lieferanten an Lager: ja\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAbgabe nur zusammen mit dem Service oder an Fachbetriebe. Vor der Beschaffung Modell, Baujahr und Seriennummer prüfen.\u003c\/p\u003e","brand":"PuqPress","offers":[{"title":"Default Title","offer_id":56306372968833,"sku":"A04517","price":39.05,"currency_code":"CHF","in_stock":false}]},{"product_id":"puqpress-induction-sensor-connector-d12-3-flange","title":"PuqPress Induction sensor + connector - D12.3 flange","description":"\u003cp\u003e\u003cstrong\u003eFachteil, nicht für den Onlineverkauf.\u003c\/strong\u003e Entwurf für Offerten und manuelle Aufträge.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eArtikelnummer: A04531\u003c\/li\u003e\n\u003cli\u003eHerstellernummer: 1-410-0022-2\u003c\/li\u003e\n\u003cli\u003eBeim Lieferanten an Lager: nein\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAbgabe nur zusammen mit dem Service oder an Fachbetriebe. Vor der Beschaffung Modell, Baujahr und Seriennummer prüfen.\u003c\/p\u003e","brand":"PuqPress","offers":[{"title":"Default Title","offer_id":56306373034369,"sku":"A04531","price":128.37,"currency_code":"CHF","in_stock":false}]},{"product_id":"induction-sensor-puqpress","title":"induction_sensor PuqPress","description":"\u003cp\u003e\u003cstrong\u003eFachteil, nicht für den Onlineverkauf.\u003c\/strong\u003e Entwurf für Offerten und manuelle Aufträge.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eArtikelnummer: A02874\u003c\/li\u003e\n\u003cli\u003eHerstellernummer: 1-410-0022-1\u003c\/li\u003e\n\u003cli\u003eBeim Lieferanten an Lager: ja\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAbgabe nur zusammen mit dem Service oder an Fachbetriebe. Vor der Beschaffung Modell, Baujahr und Seriennummer prüfen.\u003c\/p\u003e","brand":"PuqPress","offers":[{"title":"Default Title","offer_id":56306373067137,"sku":"A02874","price":128.37,"currency_code":"CHF","in_stock":false}]},{"product_id":"puqpress-led-lamp-connector","title":"PuqPress LED lamp + connector","description":"\u003cp\u003e\u003cstrong\u003eFachteil, nicht für den Onlineverkauf.\u003c\/strong\u003e Entwurf für Offerten und manuelle Aufträge.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eArtikelnummer: A04516\u003c\/li\u003e\n\u003cli\u003eHerstellernummer: 1-410-0017-1\u003c\/li\u003e\n\u003cli\u003eBeim Lieferanten an Lager: ja\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAbgabe nur zusammen mit dem Service oder an Fachbetriebe. Vor der Beschaffung Modell, Baujahr und Seriennummer prüfen.\u003c\/p\u003e","brand":"PuqPress","offers":[{"title":"Default Title","offer_id":56306373099905,"sku":"A04516","price":26.4,"currency_code":"CHF","in_stock":false}]},{"product_id":"motor-controller-mit-display-pcb-puqpress-q2-gen-4-m3-m5","title":"Motor Controller mit Display (PCB) PuqPress Q2 (Gen 4), M3,M5","description":"\u003cp\u003e\u003cstrong\u003eFachteil, nicht für den Onlineverkauf.\u003c\/strong\u003e Entwurf für Offerten und manuelle Aufträge.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eArtikelnummer: A04034\u003c\/li\u003e\n\u003cli\u003eHerstellernummer: 1-210-0101-3\u003c\/li\u003e\n\u003cli\u003eBeim Lieferanten an Lager: nein\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAbgabe nur zusammen mit dem Service oder an Fachbetriebe. Vor der Beschaffung Modell, Baujahr und Seriennummer prüfen.\u003c\/p\u003e","brand":"PuqPress","offers":[{"title":"Default Title","offer_id":56306373165441,"sku":"A04034","price":177.98,"currency_code":"CHF","in_stock":false}]},{"product_id":"motor-controller-mit-display-pcb-puqpress-q2-gen-5","title":"Motor Controller mit Display (PCB) PuqPress Q2 (Gen 5)","description":"\u003cp\u003e\u003cstrong\u003eFachteil, nicht für den Onlineverkauf.\u003c\/strong\u003e Entwurf für Offerten und manuelle Aufträge.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eArtikelnummer: A04561\u003c\/li\u003e\n\u003cli\u003eHerstellernummer: 1-210-0100-1\u003c\/li\u003e\n\u003cli\u003eBeim Lieferanten an Lager: ja\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAbgabe nur zusammen mit dem Service oder an Fachbetriebe. Vor der Beschaffung Modell, Baujahr und Seriennummer prüfen.\u003c\/p\u003e","brand":"PuqPress","offers":[{"title":"Default Title","offer_id":56306373198209,"sku":"A04561","price":202.51,"currency_code":"CHF","in_stock":false}]},{"product_id":"macap-abdeckung-display-leo-55","title":"Macap display cover for the Leo 55 – C00061661","description":"\u003cdiv class=\"ccc-mobile-wrapper\"\u003e\n\u003cstyle\u003e.ccc-mobile-wrapper{max-width:880px;margin:0 auto;font-family:-apple-system,BlinkMacSystemFont,'Segoe UI',Roboto,Helvetica,Arial,sans-serif;color:#1d1d1f;line-height:1.65;font-size:17px}.ccc-mobile-wrapper h2{font-size:1.7em;line-height:1.25;margin:0 0 .6em;font-weight:700}.ccc-mobile-wrapper h3{font-size:1.3em;line-height:1.3;margin:1.8em 0 .5em;font-weight:700}.ccc-mobile-wrapper h4{font-size:1.05em;margin:1.1em 0 .2em}.ccc-mobile-wrapper p{margin:0 0 1em}.ccc-mobile-wrapper a{color:#0b6b5f;text-decoration:underline}.ccc-compare-table{width:100%;border-collapse:collapse;margin:1em 0;font-size:.97em}.ccc-compare-table th,.ccc-compare-table td{text-align:left;padding:10px 12px;border-bottom:1px solid #e3e3e6;vertical-align:top}.ccc-compare-table th{width:42%;font-weight:600;color:#3a3a3c}.ccc-roastery-tip{background:#eff6f4;border-left:4px solid #0b6b5f;border-radius:10px;padding:16px 18px;margin:1.6em 0}.ccc-return-note{background:#fdf3ef;border-left:4px solid #b4532a;border-radius:10px;padding:16px 18px;margin:1.6em 0}.ccc-faq h4{font-weight:700;margin:1.2em 0 .2em}@media(max-width:600px){.ccc-mobile-wrapper{font-size:16px}.ccc-mobile-wrapper h2{font-size:1.45em}.ccc-mobile-wrapper h3{font-size:1.18em}}\u003c\/style\u003e\n\u003ch2\u003eThe display becomes clearly readable again\u003c\/h2\u003e\n\u003cp\u003eThe cover sits in front of the display of the Leo 55 and protects it from ground coffee, cleaning agents and daily fingerprints. After a few years at the bar it becomes milky, scratched and sometimes cracked at one corner – the grinder grinds perfectly, but the display reads as if it were fogged up.\u003c\/p\u003e\n\u003cp\u003eA replacement takes just a few minutes and turns a grinder that looks old into one that looks fresh again. The part is purely a cover panel: there are no electronics inside.\u003c\/p\u003e\n\u003ch3\u003eWhen it's due\u003c\/h3\u003e\n\u003cp\u003eReplace the cover if it is so scratched or clouded that the display is hard to read, if it is cracked, if it has come loose at one corner or if ground coffee gets behind it.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003ctable class=\"ccc-compare-table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003ePanel in front of the display, not an electronic component\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLocation\u003c\/th\u003e\n\u003ctd\u003eFront of the grinder, in front of the display\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003eMacap Leo 55\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eScope of delivery\u003c\/th\u003e\n\u003ctd\u003eOne cover. Display, circuit board and keypad are not included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eC00061661\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003ctd\u003eOur documentation gives no information on material, colour or dimensions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eMacap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eWho it's for\u003c\/h3\u003e\n\u003cp\u003eFor bars and offices with a Leo 55 that keep their grinder running and don't see a worn front as a reason to buy a new one.\u003c\/p\u003e\n\u003ch3\u003eWhat goes with it\u003c\/h3\u003e\n\u003cp\u003eThe same grinder also uses the \u003ca href=\"\/en\/products\/macap-drehknopf-mahlgradeinstellung-leo-55\"\u003egrind adjustment knob\u003c\/a\u003e and the \u003ca href=\"\/en\/products\/macap-deckel-kunststoff-leo\"\u003eplastic lid for the LEO\u003c\/a\u003e. All Macap items are listed under \u003ca href=\"\/en\/collections\/ersatzteile-macap-puqpress\"\u003eMacap and PuqPress spare parts\u003c\/a\u003e, more grinder parts under \u003ca href=\"\/en\/collections\/zubehor-und-ersatzteile-kaffeemuhlen\"\u003eAccessories and spare parts for coffee grinders\u003c\/a\u003e and in the \u003ca href=\"\/en\/collections\/serviceteile\"\u003eOriginal spare parts\u003c\/a\u003e section.\u003c\/p\u003e\n\u003cdiv class=\"ccc-roastery-tip\"\u003e\n\u003cp\u003e\u003cstrong\u003eFrom our workshop in Bern and Zurich\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe only clean plastic panels with a damp microfibre cloth, never with alcohol or abrasive cleaners. That is exactly what turns them milky within a few months – our routine, not a manufacturer's specification. For the grinding mechanism itself we use \u003ca href=\"\/en\/products\/puly-grind-verde-muhlenreinigungsmittel\"\u003ePuly Grind Verde\u003c\/a\u003e; more products are listed under \u003ca href=\"\/en\/collections\/maschinen-und-muhlenreinigung\"\u003eMachine and grinder cleaning\u003c\/a\u003e. Afterwards we grind a \u003ca href=\"\/en\/products\/nutty-delight-kaffee-blend-brasilien-indien\"\u003eNutty Delight\u003c\/a\u003e as a check, sometimes the \u003ca href=\"\/en\/products\/cozy-chocolate-natural-brasilien-kaffeebohnen\"\u003eCozy Chocolate\u003c\/a\u003e or the \u003ca href=\"\/en\/products\/very-nutty-kraftiger-robusta-aus-indien\"\u003eVery Nutty\u003c\/a\u003e. The full range is listed under \u003ca href=\"\/en\/collections\/kaffeebohnen\"\u003eCoffee beans\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ccc-return-note\"\u003e\n\u003cp\u003e\u003cstrong\u003eNo returns\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOriginal spare parts are excluded from exchange and return. They are sourced specifically for each order and cannot be resold after installation or a trial fitting on the machine. So before ordering, check the model, year of manufacture and serial number of your machine – or drop us a line and we'll clarify the fit together. Your rights in the event of defective goods remain unaffected.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ccc-faq\"\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003e\u003cstrong\u003eIs this a display?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eNo. Only the cover in front of it is supplied, purely a cover panel. Display, circuit board and keypad are not included and are not part of this item.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eWhy is there no picture?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eWe don't have a product image for this item. We'd rather show no picture than someone else's that shows something different. Write to us and we'll describe the part to you in detail.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eDoes it also fit the Leo 55 Essential?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eOur documentation lists the number for the Leo 55. The Essential is a separate version – send us the serial number of your grinder and we'll check before you order.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eWhat material is it made of?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eWe have no information on this, so we don't claim any. The only reliable reference is the part number C00061661.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eCan I pick up the part at your shop?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eYes. We're in Bern at Gerberngasse 44 and in Zurich at Hagenholzstrasse 50b. Drop us a line telling us which part you need and we'll have it ready.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003eQuestions about the fit? Write to us at \u003ca href=\"mailto:office@coffeecoachingclub.ch\"\u003eoffice@coffeecoachingclub.ch\u003c\/a\u003e. We deliver across Switzerland and to Liechtenstein in 2-4 working days.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"Is this a display?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"No. Only the cover in front of it is supplied, purely a cover panel. Display, circuit board and keypad are not included.\"}},{\"@type\":\"Question\",\"name\":\"Why is there no picture?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"We don't have a product image for this item. We'd rather show no picture than someone else's. Write to us and we'll describe the part in detail.\"}},{\"@type\":\"Question\",\"name\":\"Does it also fit the Leo 55 Essential?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Our documentation lists the number for the Leo 55. Send us the serial number of your grinder and we'll check.\"}},{\"@type\":\"Question\",\"name\":\"What material is it made of?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"We have no information on this. The only reliable reference is the part number C00061661.\"}},{\"@type\":\"Question\",\"name\":\"Can I pick up the part in the shop?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. We're in Bern at Gerberngasse 44 and in Zurich at Hagenholzstrasse 50b. Drop us a line telling us which part you need.\"}}]}\u003c\/script\u003e\n\u003c\/div\u003e","brand":"Macap","offers":[{"title":"Default Title","offer_id":56309381431681,"sku":"A04419","price":36.08,"currency_code":"CHF","in_stock":true}]},{"product_id":"macap-deckel-kunststoff-leo","title":"Macap plastic lid for the LEO – C00043015","description":"\u003cdiv class=\"ccc-mobile-wrapper\"\u003e\n\u003cstyle\u003e.ccc-mobile-wrapper{max-width:880px;margin:0 auto;font-family:-apple-system,BlinkMacSystemFont,'Segoe UI',Roboto,Helvetica,Arial,sans-serif;color:#1d1d1f;line-height:1.65;font-size:17px}.ccc-mobile-wrapper h2{font-size:1.7em;line-height:1.25;margin:0 0 .6em;font-weight:700}.ccc-mobile-wrapper h3{font-size:1.3em;line-height:1.3;margin:1.8em 0 .5em;font-weight:700}.ccc-mobile-wrapper h4{font-size:1.05em;margin:1.1em 0 .2em}.ccc-mobile-wrapper p{margin:0 0 1em}.ccc-mobile-wrapper a{color:#0b6b5f;text-decoration:underline}.ccc-compare-table{width:100%;border-collapse:collapse;margin:1em 0;font-size:.97em}.ccc-compare-table th,.ccc-compare-table td{text-align:left;padding:10px 12px;border-bottom:1px solid #e3e3e6;vertical-align:top}.ccc-compare-table th{width:42%;font-weight:600;color:#3a3a3c}.ccc-roastery-tip{background:#eff6f4;border-left:4px solid #0b6b5f;border-radius:10px;padding:16px 18px;margin:1.6em 0}.ccc-return-note{background:#fdf3ef;border-left:4px solid #b4532a;border-radius:10px;padding:16px 18px;margin:1.6em 0}.ccc-faq h4{font-weight:700;margin:1.2em 0 .2em}@media(max-width:600px){.ccc-mobile-wrapper{font-size:16px}.ccc-mobile-wrapper h2{font-size:1.45em}.ccc-mobile-wrapper h3{font-size:1.18em}}\u003c\/style\u003e\n\u003ch2\u003eA lid that closes properly again instead of jamming\u003c\/h2\u003e\n\u003cp\u003ePlastic lids are the parts with the shortest lifespan on a grinder. They are taken off several times a day, end up on the worktop, get dropped and are wiped down with cleaning agents. At some point a lug breaks off, the lid sits crooked and the beans go stale because it no longer seals tightly.\u003c\/p\u003e\n\u003cp\u003eA new lid costs a fraction of what a kilo of spoiled beans costs over the weeks – and the grinder looks as if it belongs to the business again, not in the workshop.\u003c\/p\u003e\n\u003ch3\u003eWhen it's due\u003c\/h3\u003e\n\u003cp\u003eReplace the lid if a holder or lug is broken, if it no longer sits flat, if the plastic becomes brittle and shows cracks, or if it is so scratched that coffee oils cling to the grooves.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003ctable class=\"ccc-compare-table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003ePlastic lid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLocation\u003c\/th\u003e\n\u003ctd\u003ePlaced on top, not screwed on\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003eMacap LEO. Our documentation does not specify the exact version within the LEO series – send us the serial number and we'll check the fit.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eScope of delivery\u003c\/th\u003e\n\u003ctd\u003eOne lid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eC00043015\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003ctd\u003ePlastic. Our documentation gives no details on colour, type of plastic or dimensions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eMacap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eWho it's for\u003c\/h3\u003e\n\u003cp\u003eFor bars, offices and households with a Macap LEO where the lid was the first part to give out.\u003c\/p\u003e\n\u003ch3\u003eWhat goes with it\u003c\/h3\u003e\n\u003cp\u003eFor the same grinder, there is the \u003ca href=\"\/en\/products\/macap-abdeckung-display-leo-55\"\u003ecover for the Leo 55 display\u003c\/a\u003e and the \u003ca href=\"\/en\/products\/macap-drehknopf-mahlgradeinstellung-leo-55\"\u003eknob for the grind setting\u003c\/a\u003e. All Macap items are listed under \u003ca href=\"\/en\/collections\/ersatzteile-macap-puqpress\"\u003eMacap and PuqPress spare parts\u003c\/a\u003e, more grinder parts under \u003ca href=\"\/en\/collections\/zubehor-und-ersatzteile-kaffeemuhlen\"\u003eCoffee grinder accessories and spare parts\u003c\/a\u003e.\u003c\/p\u003e\n\u003cdiv class=\"ccc-roastery-tip\"\u003e\n\u003cp\u003e\u003cstrong\u003eFrom our workshop in Bern and Zurich\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOnce a week we wipe out the bean hopper and lid dry, never wet. Coffee oils don't dissolve in water, and damp plastic absorbs the smell of the last beans – that's our routine, not a manufacturer requirement. For the grinding mechanism we use \u003ca href=\"\/en\/products\/puly-grind-verde-muhlenreinigungsmittel\"\u003ePuly Grind Verde\u003c\/a\u003e, more products are listed under \u003ca href=\"\/en\/collections\/maschinen-und-muhlenreinigung\"\u003eMachine and grinder cleaning\u003c\/a\u003e. Then we refill with fresh beans, usually \u003ca href=\"\/en\/products\/nutty-delight-kaffee-blend-brasilien-indien\"\u003eNutty Delight\u003c\/a\u003e, sometimes \u003ca href=\"\/en\/products\/cozy-chocolate-natural-brasilien-kaffeebohnen\"\u003eCozy Chocolate\u003c\/a\u003e or \u003ca href=\"\/en\/products\/very-nutty-kraftiger-robusta-aus-indien\"\u003eVery Nutty\u003c\/a\u003e. The full selection is under \u003ca href=\"\/en\/collections\/kaffeebohnen\"\u003eCoffee beans\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ccc-return-note\"\u003e\n\u003cp\u003e\u003cstrong\u003eNo returns\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOriginal spare parts are excluded from exchange and return. They are sourced specifically for each order and cannot be resold after installation or trial fitting on the machine. So before ordering, check the model, year of manufacture and serial number of your machine – or send us a quick message and we'll clarify the fit together. Your rights in the event of defective goods remain unaffected.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ccc-faq\"\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003e\u003cstrong\u003eIs this the lid of the bean hopper?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eOur documentation lists this item only as a plastic lid for the LEO, without naming where it is fitted. So we won't make any claims. Tell us which lid you're missing, ideally with a photo, and we'll clarify it before you order.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eWhy is there no picture?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eWe don't have a product image for this item. We'd rather show no image than someone else's that shows something different.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eWhat colour is it?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eWe have no information on that. The only reliable reference is the part number C00043015.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eDoes it fit every LEO?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eThe LEO series comes in several versions. Our documentation doesn't mention any restriction, but we'd rather check once than deliver a part that doesn't fit – send us the serial number.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eCan I pick up the part from your shop?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eYes. We're in Bern at Gerberngasse 44 and in Zurich at Hagenholzstrasse 50b. Send us a quick message saying which part you need and we'll have it ready.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003eQuestions about the fit? Write to us at \u003ca href=\"mailto:office@coffeecoachingclub.ch\"\u003eoffice@coffeecoachingclub.ch\u003c\/a\u003e. We deliver across Switzerland and to Liechtenstein in 2-4 working days.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"Is this the lid of the bean hopper?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Our documentation lists this item only as a plastic lid for the LEO, without naming where it is fitted. Tell us which lid you're missing, ideally with a photo.\"}},{\"@type\":\"Question\",\"name\":\"Why is there no picture?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"We don't have a product image for this item. We'd rather show no image than someone else's.\"}},{\"@type\":\"Question\",\"name\":\"What colour is it?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"We have no information on that. The only reliable reference is the part number C00043015.\"}},{\"@type\":\"Question\",\"name\":\"Does it fit every LEO?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The LEO series comes in several versions. Send us the serial number and we'll check the fit.\"}},{\"@type\":\"Question\",\"name\":\"Can I pick up the part from your shop?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. We're in Bern at Gerberngasse 44 and in Zurich at Hagenholzstrasse 50b. Send us a quick message saying which part you need.\"}}]}\u003c\/script\u003e\n\u003c\/div\u003e","brand":"Macap","offers":[{"title":"Default Title","offer_id":56309381595521,"sku":"A04711","price":33.33,"currency_code":"CHF","in_stock":true}]},{"product_id":"macap-drehknopf-mahlgradeinstellung-leo-55","title":"Macap grind adjustment knob Leo 55 – C00010601","description":"\u003cdiv class=\"ccc-mobile-wrapper\"\u003e\n\u003cstyle\u003e.ccc-mobile-wrapper{max-width:880px;margin:0 auto;font-family:-apple-system,BlinkMacSystemFont,'Segoe UI',Roboto,Helvetica,Arial,sans-serif;color:#1d1d1f;line-height:1.65;font-size:17px}.ccc-mobile-wrapper h2{font-size:1.7em;line-height:1.25;margin:0 0 .6em;font-weight:700}.ccc-mobile-wrapper h3{font-size:1.3em;line-height:1.3;margin:1.8em 0 .5em;font-weight:700}.ccc-mobile-wrapper h4{font-size:1.05em;margin:1.1em 0 .2em}.ccc-mobile-wrapper p{margin:0 0 1em}.ccc-mobile-wrapper a{color:#0b6b5f;text-decoration:underline}.ccc-compare-table{width:100%;border-collapse:collapse;margin:1em 0;font-size:.97em}.ccc-compare-table th,.ccc-compare-table td{text-align:left;padding:10px 12px;border-bottom:1px solid #e3e3e6;vertical-align:top}.ccc-compare-table th{width:42%;font-weight:600;color:#3a3a3c}.ccc-roastery-tip{background:#eff6f4;border-left:4px solid #0b6b5f;border-radius:10px;padding:16px 18px;margin:1.6em 0}.ccc-return-note{background:#fdf3ef;border-left:4px solid #b4532a;border-radius:10px;padding:16px 18px;margin:1.6em 0}.ccc-faq h4{font-weight:700;margin:1.2em 0 .2em}@media(max-width:600px){.ccc-mobile-wrapper{font-size:16px}.ccc-mobile-wrapper h2{font-size:1.45em}.ccc-mobile-wrapper h3{font-size:1.18em}}\u003c\/style\u003e\n\u003ch2\u003eHit your grind setting precisely again\u003c\/h2\u003e\n\u003cp\u003eThe knob is the control used to adjust the grind setting on the Leo 55. It gets handled several times a day, and at some point the detents are worn out, the markings are rubbed off, or the knob turns without anything changing in the grind.\u003c\/p\u003e\n\u003cp\u003eThe effect is treacherous: you adjust, taste no difference, adjust further and lose your reference point entirely. A new knob brings back the feel for the scale.\u003c\/p\u003e\n\u003ch3\u003eWhen it is due\u003c\/h3\u003e\n\u003cp\u003eReplace the knob if it slips on the shaft, if the detents no longer click noticeably into place, if the marking has become illegible or if the plastic is cracked.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003ctable class=\"ccc-compare-table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eKnob for the grind adjustment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLocation\u003c\/th\u003e\n\u003ctd\u003eGrinding mechanism, accessible from the outside\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003eMacap Leo 55\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eScope of delivery\u003c\/th\u003e\n\u003ctd\u003eOne knob\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eC00010601\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003ctd\u003eOur documentation gives no information on material, colour or dimensions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eMacap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eWho it is for\u003c\/h3\u003e\n\u003cp\u003eFor bars and offices with a Leo 55 where the grind setting is readjusted every day and the knob has suffered accordingly.\u003c\/p\u003e\n\u003ch3\u003eWhat goes with it\u003c\/h3\u003e\n\u003cp\u003eThe Essential version has its \u003ca href=\"\/en\/products\/macap-drehknopf-mahlgradeinstellung-leo-55-essential\"\u003eown knob with the number C00010602\u003c\/a\u003e. Also part of the Leo range are the \u003ca href=\"\/en\/products\/macap-abdeckung-display-leo-55\"\u003edisplay cover\u003c\/a\u003e and the \u003ca href=\"\/en\/products\/macap-deckel-kunststoff-leo\"\u003eplastic lid\u003c\/a\u003e. All Macap items are listed under \u003ca href=\"\/en\/collections\/ersatzteile-macap-puqpress\"\u003eMacap and PuqPress spare parts\u003c\/a\u003e.\u003c\/p\u003e\n\u003cdiv class=\"ccc-roastery-tip\"\u003e\n\u003cp\u003e\u003cstrong\u003eFrom our workshop in Bern and Zurich\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe note the grind setting with the date and the bean on a slip of paper on the grinder. If you know the numbers, you find your way back after a change of beans in two shots instead of ten – that is our routine, not a manufacturer specification. We clean dry with \u003ca href=\"\/en\/products\/puly-grind-verde-muhlenreinigungsmittel\"\u003ePuly Grind Verde\u003c\/a\u003e; more products are listed under \u003ca href=\"\/en\/collections\/maschinen-und-muhlenreinigung\"\u003eMachine and grinder cleaning\u003c\/a\u003e. We dial in on a \u003ca href=\"\/en\/products\/nutty-delight-kaffee-blend-brasilien-indien\"\u003eNutty Delight\u003c\/a\u003e, sometimes on the \u003ca href=\"\/en\/products\/cozy-chocolate-natural-brasilien-kaffeebohnen\"\u003eCozy Chocolate\u003c\/a\u003e or the \u003ca href=\"\/en\/products\/very-nutty-kraftiger-robusta-aus-indien\"\u003eVery Nutty\u003c\/a\u003e. The full selection is under \u003ca href=\"\/en\/collections\/kaffeebohnen\"\u003eCoffee beans\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ccc-return-note\"\u003e\n\u003cp\u003e\u003cstrong\u003eReturns excluded\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOriginal spare parts are excluded from exchange and return. They are sourced specifically for each order and cannot be resold after installation or a trial fitting on the device. So before ordering, check the model, year of manufacture and serial number of your machine – or send us a short message and we will clarify the fit together. Your rights in the case of defective goods remain unaffected.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ccc-faq\"\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003e\u003cstrong\u003eDoes this knob also fit the Leo 55 Essential?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eNo, Macap has a separate number for it: C00010602. The two items are listed separately, which is why we also offer them separately.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eWhy is there no picture?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eWe have no product image for this item. We would rather show no picture than someone else's that shows something different.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eIs the scale or a pointer included?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eThe knob is supplied. Our documentation gives no information on further components – ask us if the scale ring on your grinder is also damaged.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eWhat material is it made of?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eWe have no information on that. The only reliable reference is the part number C00010601.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eCan I pick up the part from your shop?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eYes. We are in Bern at Gerberngasse 44 and in Zurich at Hagenholzstrasse 50b. Send us a short message saying which part you need and we will have it ready.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003eQuestions about the fit? Write to us at \u003ca href=\"mailto:office@coffeecoachingclub.ch\"\u003eoffice@coffeecoachingclub.ch\u003c\/a\u003e. We deliver across Switzerland and to Liechtenstein in 2-4 working days.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"Does this knob also fit the Leo 55 Essential?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"No, Macap has a separate number for it: C00010602.\"}},{\"@type\":\"Question\",\"name\":\"Why is there no picture?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"We have no product image for this item. We would rather show no picture than someone else's.\"}},{\"@type\":\"Question\",\"name\":\"Is the scale or a pointer included?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The knob is supplied. Our documentation gives no information on further components.\"}},{\"@type\":\"Question\",\"name\":\"What material is it made of?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"We have no information on that. The only reliable reference is the part number C00010601.\"}},{\"@type\":\"Question\",\"name\":\"Can I pick up the part from the shop?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. We are in Bern at Gerberngasse 44 and in Zurich at Hagenholzstrasse 50b. Send us a short message saying which part you need.\"}}]}\u003c\/script\u003e\n\u003c\/div\u003e","brand":"Macap","offers":[{"title":"Default Title","offer_id":56309381628289,"sku":"A03819","price":30.58,"currency_code":"CHF","in_stock":true}]},{"product_id":"macap-drehknopf-mahlgradeinstellung-leo-55-essential","title":"Macap grind adjustment knob Leo 55 Essential – C00010602","description":"\u003cdiv class=\"ccc-mobile-wrapper\"\u003e\n\u003cstyle\u003e.ccc-mobile-wrapper{max-width:880px;margin:0 auto;font-family:-apple-system,BlinkMacSystemFont,'Segoe UI',Roboto,Helvetica,Arial,sans-serif;color:#1d1d1f;line-height:1.65;font-size:17px}.ccc-mobile-wrapper h2{font-size:1.7em;line-height:1.25;margin:0 0 .6em;font-weight:700}.ccc-mobile-wrapper h3{font-size:1.3em;line-height:1.3;margin:1.8em 0 .5em;font-weight:700}.ccc-mobile-wrapper h4{font-size:1.05em;margin:1.1em 0 .2em}.ccc-mobile-wrapper p{margin:0 0 1em}.ccc-mobile-wrapper a{color:#0b6b5f;text-decoration:underline}.ccc-compare-table{width:100%;border-collapse:collapse;margin:1em 0;font-size:.97em}.ccc-compare-table th,.ccc-compare-table td{text-align:left;padding:10px 12px;border-bottom:1px solid #e3e3e6;vertical-align:top}.ccc-compare-table th{width:42%;font-weight:600;color:#3a3a3c}.ccc-roastery-tip{background:#eff6f4;border-left:4px solid #0b6b5f;border-radius:10px;padding:16px 18px;margin:1.6em 0}.ccc-return-note{background:#fdf3ef;border-left:4px solid #b4532a;border-radius:10px;padding:16px 18px;margin:1.6em 0}.ccc-faq h4{font-weight:700;margin:1.2em 0 .2em}@media(max-width:600px){.ccc-mobile-wrapper{font-size:16px}.ccc-mobile-wrapper h2{font-size:1.45em}.ccc-mobile-wrapper h3{font-size:1.18em}}\u003c\/style\u003e\n\u003ch2\u003eThe right knob for the Essential – not the one for the standard Leo\u003c\/h2\u003e\n\u003cp\u003eMacap lists its own grind adjustment knob for the Leo 55 Essential. It looks similar to the knob on the standard version but carries a different number – and that is exactly why we offer the two separately instead of selling one as «fits all».\u003c\/p\u003e\n\u003cp\u003eIt is due when the adjustment no longer engages cleanly: the knob spins freely, the click stops are gone, or the markings are so worn that you no longer read the set value but guess it.\u003c\/p\u003e\n\u003ch3\u003eWhen it is due\u003c\/h3\u003e\n\u003cp\u003eReplace the knob if it slips on the shaft, if the grind setting can no longer be reproduced, if the markings are illegible or if the plastic shows cracks.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003ctable class=\"ccc-compare-table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eKnob for the grind adjustment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLocation\u003c\/th\u003e\n\u003ctd\u003eGrinding mechanism, accessible from the outside\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003eMacap Leo 55 Essential\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eScope of delivery\u003c\/th\u003e\n\u003ctd\u003eOne knob\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eC00010602\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003ctd\u003eOur documentation gives no details on material, colour or dimensions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eMacap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eWho it is for\u003c\/h3\u003e\n\u003cp\u003eFor businesses and households with a Leo 55 Essential who want to keep their grinder in service instead of buying a new one because of a control part.\u003c\/p\u003e\n\u003ch3\u003eWhat goes with it\u003c\/h3\u003e\n\u003cp\u003eFor the standard version there is the \u003ca href=\"\/en\/products\/macap-drehknopf-mahlgradeinstellung-leo-55\"\u003eknob C00010601\u003c\/a\u003e. Also part of the Leo range are the \u003ca href=\"\/en\/products\/macap-abdeckung-display-leo-55\"\u003ecover for the display\u003c\/a\u003e and the \u003ca href=\"\/en\/products\/macap-deckel-kunststoff-leo\"\u003eplastic lid\u003c\/a\u003e. All Macap items are listed under \u003ca href=\"\/en\/collections\/ersatzteile-macap-puqpress\"\u003eMacap and PuqPress spare parts\u003c\/a\u003e.\u003c\/p\u003e\n\u003cdiv class=\"ccc-roastery-tip\"\u003e\n\u003cp\u003e\u003cstrong\u003eFrom our workshop in Bern and Zurich\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBefore we replace a knob, we check the shaft underneath: if it is worn round, the new knob will not hold for long either. That takes two minutes and saves a second order – our routine, not a manufacturer requirement. Cleaning is done dry with \u003ca href=\"\/en\/products\/puly-grind-verde-muhlenreinigungsmittel\"\u003ePuly Grind Verde\u003c\/a\u003e; further products are listed under \u003ca href=\"\/en\/collections\/maschinen-und-muhlenreinigung\"\u003eMachine and grinder cleaning\u003c\/a\u003e. We then dial in with a \u003ca href=\"\/en\/products\/nutty-delight-kaffee-blend-brasilien-indien\"\u003eNutty Delight\u003c\/a\u003e, sometimes with the \u003ca href=\"\/en\/products\/cozy-chocolate-natural-brasilien-kaffeebohnen\"\u003eCozy Chocolate\u003c\/a\u003e or the \u003ca href=\"\/en\/products\/very-nutty-kraftiger-robusta-aus-indien\"\u003eVery Nutty\u003c\/a\u003e. The full selection is under \u003ca href=\"\/en\/collections\/kaffeebohnen\"\u003eCoffee beans\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ccc-return-note\"\u003e\n\u003cp\u003e\u003cstrong\u003eNo returns\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOriginal spare parts are excluded from exchange and return. They are sourced specifically for each order and cannot be resold after installation or a test fit on the machine. So before ordering, check the model, year of manufacture and serial number of your machine – or drop us a line and we will clarify the fit together. Your rights in the case of defective goods remain unaffected.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ccc-faq\"\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003e\u003cstrong\u003eHow does it differ from the knob on the standard Leo 55?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eMacap lists two separate numbers: C00010601 for the Leo 55 and C00010602 for the Essential. Our documentation does not say what the structural difference is – we go by the number and do not guess.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eWhy is there no picture?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eWe do not have a product image for this item. We would rather show no picture than someone else's that shows something different.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eHow do I know whether I have an Essential?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eFrom the grinder's rating plate. If in doubt, send us a photo of it and we will tell you which number you need.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eWhat material is it made of?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eWe have no information on that. The only reliable reference is the part number C00010602.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eCan I pick up the part in your shop?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eYes. We are in Bern at Gerberngasse 44 and in Zurich at Hagenholzstrasse 50b. Drop us a line saying which part you need and we will have it ready for you.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003eQuestions about the fit? Write to us at \u003ca href=\"mailto:office@coffeecoachingclub.ch\"\u003eoffice@coffeecoachingclub.ch\u003c\/a\u003e. We deliver across Switzerland and to Liechtenstein in 2-4 working days.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"How does it differ from the knob on the standard Leo 55?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Macap lists two separate numbers: C00010601 for the Leo 55 and C00010602 for the Essential. Our documentation does not say what the structural difference is.\"}},{\"@type\":\"Question\",\"name\":\"Why is there no picture?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"We do not have a product image for this item. We would rather show no picture than someone else's.\"}},{\"@type\":\"Question\",\"name\":\"How do I know whether I have an Essential?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"From the grinder's rating plate. If in doubt, send us a photo of it and we will tell you which number you need.\"}},{\"@type\":\"Question\",\"name\":\"What material is it made of?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"We have no information on that. The only reliable reference is the part number C00010602.\"}},{\"@type\":\"Question\",\"name\":\"Can I pick up the part in the shop?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. We are in Bern at Gerberngasse 44 and in Zurich at Hagenholzstrasse 50b. Drop us a line saying which part you need.\"}}]}\u003c\/script\u003e\n\u003c\/div\u003e","brand":"Macap","offers":[{"title":"Default Title","offer_id":56309381693825,"sku":"A04883","price":25.3,"currency_code":"CHF","in_stock":true}]},{"product_id":"macap-flapper-leo","title":"Macap Flapper for LEO – C00044007","description":"\u003cdiv class=\"ccc-mobile-wrapper\"\u003e\n\u003cstyle\u003e.ccc-mobile-wrapper{max-width:880px;margin:0 auto;font-family:-apple-system,BlinkMacSystemFont,'Segoe UI',Roboto,Helvetica,Arial,sans-serif;color:#1d1d1f;line-height:1.65;font-size:17px}.ccc-mobile-wrapper h2{font-size:1.7em;line-height:1.25;margin:0 0 .6em;font-weight:700}.ccc-mobile-wrapper h3{font-size:1.3em;line-height:1.3;margin:1.8em 0 .5em;font-weight:700}.ccc-mobile-wrapper h4{font-size:1.05em;margin:1.1em 0 .2em}.ccc-mobile-wrapper p{margin:0 0 1em}.ccc-mobile-wrapper a{color:#0b6b5f;text-decoration:underline}.ccc-compare-table{width:100%;border-collapse:collapse;margin:1em 0;font-size:.97em}.ccc-compare-table th,.ccc-compare-table td{text-align:left;padding:10px 12px;border-bottom:1px solid #e3e3e6;vertical-align:top}.ccc-compare-table th{width:42%;font-weight:600;color:#3a3a3c}.ccc-roastery-tip{background:#eff6f4;border-left:4px solid #0b6b5f;border-radius:10px;padding:16px 18px;margin:1.6em 0}.ccc-return-note{background:#fdf3ef;border-left:4px solid #b4532a;border-radius:10px;padding:16px 18px;margin:1.6em 0}.ccc-faq h4{font-weight:700;margin:1.2em 0 .2em}@media(max-width:600px){.ccc-mobile-wrapper{font-size:16px}.ccc-mobile-wrapper h2{font-size:1.45em}.ccc-mobile-wrapper h3{font-size:1.18em}}\u003c\/style\u003e\n\u003ch2\u003eNo more coffee grounds on your countertop\u003c\/h2\u003e\n\u003cp\u003eThe flapper is the soft flap on the chute. It closes the channel when nothing is being ground and keeps the remaining grounds where they belong. A small part that moves a hundred times a day – and at some point it hardens, cracks or loses its tension.\u003c\/p\u003e\n\u003cp\u003eYou notice it when the area around the grinder is constantly dusty, when grounds keep trickling out after grinding, or when the last dose is consistently half a gram too light because the rest gets stuck in the channel.\u003c\/p\u003e\n\u003ch3\u003eWhen it's due\u003c\/h3\u003e\n\u003cp\u003eReplace the flapper when it has become hard or brittle, when it has cracks or notches, when it no longer springs back on its own or when grounds trickle out after every grind. In daily bar use it is a regular wear part.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003ctable class=\"ccc-compare-table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eFlapper, movable flap on the chute\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation location\u003c\/th\u003e\n\u003ctd\u003eGrinder chute\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003eMacap LEO. Our documentation does not specify the exact version within the LEO range – send us the serial number and we will check the fit.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eScope of delivery\u003c\/th\u003e\n\u003ctd\u003eOne flapper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eC00044007\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003ctd\u003eOur documentation does not specify material, colour or dimensions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eMacap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eWho it's for\u003c\/h3\u003e\n\u003cp\u003eFor bars, offices and households with a Macap LEO – the cheapest part in the catalogue that makes the biggest difference on your countertop.\u003c\/p\u003e\n\u003ch3\u003eWhat goes with it\u003c\/h3\u003e\n\u003cp\u003eFor the same grinder there is the \u003ca href=\"\/en\/products\/macap-drehknopf-mahlgradeinstellung-leo-55\"\u003eknob for the grind adjustment\u003c\/a\u003e, the \u003ca href=\"\/en\/products\/macap-deckel-kunststoff-leo\"\u003eplastic lid\u003c\/a\u003e and the \u003ca href=\"\/en\/products\/macap-abdeckung-display-leo-55\"\u003edisplay cover\u003c\/a\u003e. All Macap items are listed under \u003ca href=\"\/en\/collections\/ersatzteile-macap-puqpress\"\u003eMacap and PuqPress spare parts\u003c\/a\u003e, more grinder parts under \u003ca href=\"\/en\/collections\/zubehor-und-ersatzteile-kaffeemuhlen\"\u003eCoffee grinder accessories and spare parts\u003c\/a\u003e.\u003c\/p\u003e\n\u003cdiv class=\"ccc-roastery-tip\"\u003e\n\u003cp\u003e\u003cstrong\u003eFrom our workshop in Bern and Zurich\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe take the flapper out during the weekly cleaning and wipe it dry. If you clean it in the dishwasher, it will be hard within a few months – that is our routine, not a manufacturer specification. For the grinding channel we use \u003ca href=\"\/en\/products\/puly-grind-verde-muhlenreinigungsmittel\"\u003ePuly Grind Verde\u003c\/a\u003e, more products are listed under \u003ca href=\"\/en\/collections\/maschinen-und-muhlenreinigung\"\u003eMachine and grinder cleaning\u003c\/a\u003e. Afterwards we grind a \u003ca href=\"\/en\/products\/nutty-delight-kaffee-blend-brasilien-indien\"\u003eNutty Delight\u003c\/a\u003e as a check, sometimes the \u003ca href=\"\/en\/products\/cozy-chocolate-natural-brasilien-kaffeebohnen\"\u003eCozy Chocolate\u003c\/a\u003e or the \u003ca href=\"\/en\/products\/very-nutty-kraftiger-robusta-aus-indien\"\u003eVery Nutty\u003c\/a\u003e. The full selection is under \u003ca href=\"\/en\/collections\/kaffeebohnen\"\u003eCoffee beans\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ccc-return-note\"\u003e\n\u003cp\u003e\u003cstrong\u003eNo returns\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOriginal spare parts are excluded from exchange and return. They are sourced specifically for each order and cannot be resold after installation or a trial fit on the device. So before ordering, check the model, year of manufacture and serial number of your machine – or drop us a quick message and we will clarify the fit together. Your rights in the case of defective goods remain unaffected.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ccc-faq\"\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003e\u003cstrong\u003eHow often does the flapper need to be replaced?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eThat depends on use. In a bar with many shots it is a yearly wear part; at home it lasts considerably longer. Its condition decides, not the calendar.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eWhy is there no picture?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eWe don't have a product image for this item. We would rather show no picture than someone else's that shows something different. Write to us and we will describe the part to you in detail.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eWill a flapper from another brand fit?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eWe advise against it. Flappers look similar but differ in width, thickness and mounting. Order the number that belongs to your grinder.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eWhat material is it made of?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eWe have no information on that, so we don't claim any. The only reliable reference is the part number C00044007.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eCan I pick up the part from your shop?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eYes. We are in Bern at Gerberngasse 44 and in Zurich at Hagenholzstrasse 50b. Drop us a quick message saying which part you need and we will have it ready.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003eQuestions about the fit? Write to us at \u003ca href=\"mailto:office@coffeecoachingclub.ch\"\u003eoffice@coffeecoachingclub.ch\u003c\/a\u003e. We deliver across Switzerland and to Liechtenstein in 2-4 working days.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"How often does the flapper need to be replaced?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"That depends on use. In a bar with many shots it is a yearly wear part; at home it lasts considerably longer.\"}},{\"@type\":\"Question\",\"name\":\"Why is there no picture?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"We don't have a product image for this item. We would rather show no picture than someone else's.\"}},{\"@type\":\"Question\",\"name\":\"Will a flapper from another brand fit?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"We advise against it. Flappers differ in width, thickness and mounting. Order the number that belongs to your grinder.\"}},{\"@type\":\"Question\",\"name\":\"What material is it made of?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"We have no information on that. The only reliable reference is the part number C00044007.\"}},{\"@type\":\"Question\",\"name\":\"Can I pick up the part from the shop?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. We are in Bern at Gerberngasse 44 and in Zurich at Hagenholzstrasse 50b. Drop us a quick message saying which part you need.\"}}]}\u003c\/script\u003e\n\u003c\/div\u003e","brand":"Macap","offers":[{"title":"Default Title","offer_id":56309382152577,"sku":"A04417","price":5.5,"currency_code":"CHF","in_stock":true}]},{"product_id":"macap-gummi-siebtraegerauflage-leo-alt","title":"Macap rubber for the LEO portafilter support – old version, C00071802","description":"\u003cdiv class=\"ccc-mobile-wrapper\"\u003e\n\u003cstyle\u003e.ccc-mobile-wrapper{max-width:880px;margin:0 auto;font-family:-apple-system,BlinkMacSystemFont,'Segoe UI',Roboto,Helvetica,Arial,sans-serif;color:#1d1d1f;line-height:1.65;font-size:17px}.ccc-mobile-wrapper h2{font-size:1.7em;line-height:1.25;margin:0 0 .6em;font-weight:700}.ccc-mobile-wrapper h3{font-size:1.3em;line-height:1.3;margin:1.8em 0 .5em;font-weight:700}.ccc-mobile-wrapper h4{font-size:1.05em;margin:1.1em 0 .2em}.ccc-mobile-wrapper p{margin:0 0 1em}.ccc-mobile-wrapper a{color:#0b6b5f;text-decoration:underline}.ccc-compare-table{width:100%;border-collapse:collapse;margin:1em 0;font-size:.97em}.ccc-compare-table th,.ccc-compare-table td{text-align:left;padding:10px 12px;border-bottom:1px solid #e3e3e6;vertical-align:top}.ccc-compare-table th{width:42%;font-weight:600;color:#3a3a3c}.ccc-roastery-tip{background:#eff6f4;border-left:4px solid #0b6b5f;border-radius:10px;padding:16px 18px;margin:1.6em 0}.ccc-return-note{background:#fdf3ef;border-left:4px solid #b4532a;border-radius:10px;padding:16px 18px;margin:1.6em 0}.ccc-faq h4{font-weight:700;margin:1.2em 0 .2em}@media(max-width:600px){.ccc-mobile-wrapper{font-size:16px}.ccc-mobile-wrapper h2{font-size:1.45em}.ccc-mobile-wrapper h3{font-size:1.18em}}\u003c\/style\u003e\n\u003ch2\u003eThe portafilter sits steady in the fork again\u003c\/h2\u003e\n\u003cp\u003eThe rubber pad is the small piece the portafilter rests on while grinding. It holds it in place, cushions knocks and stops metal from rubbing against metal. You don't think about it until it's gone – and then the portafilter slides a little further forward with every grind.\u003c\/p\u003e\n\u003cp\u003eRubber ages. The pad hardens, cracks, coffee oils soak in, and at some point it comes loose from the support or is simply worn through. This version fits the older design of the LEO, part number C00071802.\u003c\/p\u003e\n\u003ch3\u003eWhen it's due\u003c\/h3\u003e\n\u003cp\u003eIt's due when the portafilter shifts or rattles in the support, when the rubber has become hard, cracked or greasy, when pieces of it are missing or when new scratch marks appear on the rim of the portafilter.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003ctable class=\"ccc-compare-table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eRubber pad for the portafilter support\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation location\u003c\/th\u003e\n\u003ctd\u003ePortafilter support on the grinder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003eMacap LEO, old version. The comparison shows which design is on your grinder – if in doubt, send us a photo.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eScope of delivery\u003c\/th\u003e\n\u003ctd\u003eOne rubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eC00071802\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003ctd\u003eOur documentation gives no details on dimensions or rubber type\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eMacap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eWho it's for\u003c\/h3\u003e\n\u003cp\u003eFor anyone with an older-design LEO who wants to replace a wear part for a few francs before the rim of the portafilter suffers.\u003c\/p\u003e\n\u003ch3\u003eWhat goes with it\u003c\/h3\u003e\n\u003cp\u003eFor the newer design we carry the \u003ca href=\"\/en\/products\/macap-gummi-siebtraegerauflage-leo-neu\"\u003erubber C00071911\u003c\/a\u003e. Other LEO parts are the \u003ca href=\"\/en\/products\/macap-flapper-leo\"\u003eFlapper C00044007\u003c\/a\u003e and the \u003ca href=\"\/en\/products\/macap-drehknopf-mahlgradeinstellung-leo-55\"\u003eknob for the grind adjustment\u003c\/a\u003e. The whole category is under \u003ca href=\"\/en\/collections\/ersatzteile-macap-puqpress\"\u003eMacap and PuqPress spare parts\u003c\/a\u003e, more grinder parts under \u003ca href=\"\/en\/collections\/zubehor-und-ersatzteile-kaffeemuhlen\"\u003eCoffee grinder accessories and spare parts\u003c\/a\u003e.\u003c\/p\u003e\n\u003cdiv class=\"ccc-roastery-tip\"\u003e\n\u003cp\u003e\u003cstrong\u003eFrom our workshop in Bern and Zurich\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAt the end of each day we wipe the support with the damp cloth we also use on the steam wand. It's coffee oil that makes the rubber hard, not age alone – that's our routine, not a manufacturer requirement. Afterwards there's a \u003ca href=\"\/en\/products\/nutty-delight-kaffee-blend-brasilien-indien\"\u003eNutty Delight\u003c\/a\u003e, sometimes the \u003ca href=\"\/en\/products\/cozy-chocolate-natural-brasilien-kaffeebohnen\"\u003eCozy Chocolate\u003c\/a\u003e or the \u003ca href=\"\/en\/products\/very-nutty-kraftiger-robusta-aus-indien\"\u003eVery Nutty\u003c\/a\u003e. The full selection is under \u003ca href=\"\/en\/collections\/kaffeebohnen\"\u003eCoffee beans\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ccc-return-note\"\u003e\n\u003cp\u003e\u003cstrong\u003eNo returns\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOriginal spare parts are excluded from exchange and return. They are sourced specifically for each order and cannot be resold after installation or a test fit on the machine. So before ordering, check the model, year of manufacture and serial number of your machine – or drop us a line and we'll work out the fit together. Your rights in the case of defective goods remain unaffected.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ccc-faq\"\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003e\u003cstrong\u003eHow do I tell the old version from the new one?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eThe surest way is the number on the removed part or a photo of the support. Send it to us and we'll tell you which of the two numbers you need.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eIs the portafilter support itself included?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eNo, only the rubber is supplied. The metal support stays on the grinder.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eHow often does the rubber need replacing?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eOur documentation doesn't specify an interval. In practice it depends on how often you grind and how clean you keep it.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eDoes it also fit other Macap grinders?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eOur documentation lists C00071802 for the LEO in the old version. It says nothing about other models – just ask us and we'll check.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eCan I pick up the part from your shop?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eYes. We're in Bern at Gerberngasse 44 and in Zurich at Hagenholzstrasse 50b. Drop us a line to say which part you need and we'll have it ready.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003eQuestions about fit? Write to us at \u003ca href=\"mailto:office@coffeecoachingclub.ch\"\u003eoffice@coffeecoachingclub.ch\u003c\/a\u003e. We deliver across Switzerland and to Liechtenstein in 2-4 working days.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"How do I tell the old version from the new one?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The surest way is the number on the removed part or a photo of the support. Send it to us and we'll tell you which number you need.\"}},{\"@type\":\"Question\",\"name\":\"Is the portafilter support itself included?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"No, only the rubber is supplied. The metal support stays on the grinder.\"}},{\"@type\":\"Question\",\"name\":\"How often does the rubber need replacing?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Our documentation doesn't specify an interval. In practice it depends on how often you grind and how clean you keep it.\"}},{\"@type\":\"Question\",\"name\":\"Does it also fit other Macap grinders?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Our documentation lists C00071802 for the LEO in the old version. It says nothing about other models.\"}},{\"@type\":\"Question\",\"name\":\"Can I pick up the part from your shop?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. We're in Bern at Gerberngasse 44 and in Zurich at Hagenholzstrasse 50b. Drop us a line to say which part you need.\"}}]}\u003c\/script\u003e\n\u003c\/div\u003e","brand":"Macap","offers":[{"title":"Default Title","offer_id":56309410431361,"sku":"A03894","price":3.3,"currency_code":"CHF","in_stock":true}]},{"product_id":"macap-gummi-siebtraegerauflage-leo-neu","title":"Macap rubber for the LEO portafilter support – new version, C00071911","description":"\u003cdiv class=\"ccc-mobile-wrapper\"\u003e\n\u003cstyle\u003e.ccc-mobile-wrapper{max-width:880px;margin:0 auto;font-family:-apple-system,BlinkMacSystemFont,'Segoe UI',Roboto,Helvetica,Arial,sans-serif;color:#1d1d1f;line-height:1.65;font-size:17px}.ccc-mobile-wrapper h2{font-size:1.7em;line-height:1.25;margin:0 0 .6em;font-weight:700}.ccc-mobile-wrapper h3{font-size:1.3em;line-height:1.3;margin:1.8em 0 .5em;font-weight:700}.ccc-mobile-wrapper h4{font-size:1.05em;margin:1.1em 0 .2em}.ccc-mobile-wrapper p{margin:0 0 1em}.ccc-mobile-wrapper a{color:#0b6b5f;text-decoration:underline}.ccc-compare-table{width:100%;border-collapse:collapse;margin:1em 0;font-size:.97em}.ccc-compare-table th,.ccc-compare-table td{text-align:left;padding:10px 12px;border-bottom:1px solid #e3e3e6;vertical-align:top}.ccc-compare-table th{width:42%;font-weight:600;color:#3a3a3c}.ccc-roastery-tip{background:#eff6f4;border-left:4px solid #0b6b5f;border-radius:10px;padding:16px 18px;margin:1.6em 0}.ccc-return-note{background:#fdf3ef;border-left:4px solid #b4532a;border-radius:10px;padding:16px 18px;margin:1.6em 0}.ccc-faq h4{font-weight:700;margin:1.2em 0 .2em}@media(max-width:600px){.ccc-mobile-wrapper{font-size:16px}.ccc-mobile-wrapper h2{font-size:1.45em}.ccc-mobile-wrapper h3{font-size:1.18em}}\u003c\/style\u003e\n\u003ch2\u003eThe portafilter sits steady in the fork again\u003c\/h2\u003e\n\u003cp\u003eThe rubber pad is the small piece the portafilter rests on while grinding. It holds it in place, cushions knocks and prevents metal from rubbing against metal. This version belongs to the newer design of the LEO and has the part number C00071911.\u003c\/p\u003e\n\u003cp\u003eRubber ages even when nothing happens. It hardens, cracks, absorbs coffee oils, and at some point no longer holds the portafilter steady. If you replace the part in good time, you'll feel the difference every time you grind.\u003c\/p\u003e\n\u003ch3\u003eWhen it's due\u003c\/h3\u003e\n\u003cp\u003eIt's due when the portafilter shifts or rattles in the support, when the rubber has become hard, cracked or greasy, when pieces are missing or when new scratch marks appear on the rim of the portafilter.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003ctable class=\"ccc-compare-table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eRubber pad for the portafilter support\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation location\u003c\/th\u003e\n\u003ctd\u003ePortafilter support on the grinder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003eMacap LEO, new version. The comparison shows which design is fitted to your grinder – if in doubt, send us a photo.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eScope of delivery\u003c\/th\u003e\n\u003ctd\u003eOne rubber pad\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eC00071911\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003ctd\u003eOur documentation gives no information on dimensions or rubber type\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eMacap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eWho it's for\u003c\/h3\u003e\n\u003cp\u003eFor anyone with a LEO of the newer design – and for businesses that treat the part as a plannable wear part rather than an annoyance when it tears.\u003c\/p\u003e\n\u003ch3\u003eWhat goes with it\u003c\/h3\u003e\n\u003cp\u003eFor the older design we stock the \u003ca href=\"\/en\/products\/macap-gummi-siebtraegerauflage-leo-alt\"\u003erubber C00071802\u003c\/a\u003e. Other LEO parts are the \u003ca href=\"\/en\/products\/macap-flapper-leo\"\u003eflapper C00044007\u003c\/a\u003e, the \u003ca href=\"\/en\/products\/macap-drehknopf-mahlgradeinstellung-leo-55\"\u003erotary knob for the grind adjustment\u003c\/a\u003e and the \u003ca href=\"\/en\/products\/macap-deckel-kunststoff-leo\"\u003eplastic lid C00043015\u003c\/a\u003e. The whole section is under \u003ca href=\"\/en\/collections\/ersatzteile-macap-puqpress\"\u003eMacap and PuqPress spare parts\u003c\/a\u003e, more grinder parts under \u003ca href=\"\/en\/collections\/zubehor-und-ersatzteile-kaffeemuhlen\"\u003eCoffee grinder accessories and spare parts\u003c\/a\u003e.\u003c\/p\u003e\n\u003cdiv class=\"ccc-roastery-tip\"\u003e\n\u003cp\u003e\u003cstrong\u003eFrom our workshop in Bern and Zurich\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAt the daily close we wipe the support with the damp cloth we also use on the steam wand. It's coffee oil that makes the rubber hard, not age alone – this is our routine, not a manufacturer requirement. Afterwards we have a \u003ca href=\"\/en\/products\/nutty-delight-kaffee-blend-brasilien-indien\"\u003eNutty Delight\u003c\/a\u003e, sometimes the \u003ca href=\"\/en\/products\/cozy-chocolate-natural-brasilien-kaffeebohnen\"\u003eCozy Chocolate\u003c\/a\u003e or the \u003ca href=\"\/en\/products\/very-nutty-kraftiger-robusta-aus-indien\"\u003eVery Nutty\u003c\/a\u003e. The full selection is under \u003ca href=\"\/en\/collections\/kaffeebohnen\"\u003eCoffee beans\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ccc-return-note\"\u003e\n\u003cp\u003e\u003cstrong\u003eNo returns\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOriginal spare parts are excluded from exchange and return. They are sourced specifically for each order and cannot be resold once they have been installed or test-fitted on the machine. So before ordering, check the model, year of manufacture and serial number of your machine – or drop us a line and we'll clarify the fit together. Your rights in the case of defective goods remain unaffected.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ccc-faq\"\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003e\u003cstrong\u003eWhy does the new version cost more than the old one?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eThey are two different parts with their own part numbers and their own design. The prices come from the respective purchase costs, not from an upgrade.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eHow do I know which version I need?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eThe safest way is the number on the removed part or a photo of the support. Send it to us and we'll tell you which of the two numbers fits.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eIs the metal carrier included?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eNo, only the rubber is supplied.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eDoes it also fit other Macap grinders?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eOur documentation lists C00071911 for the LEO in the new version. It says nothing about other models – just ask us and we'll check.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eCan I pick up the part at your shop?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eYes. We're in Bern at Gerberngasse 44 and in Zurich at Hagenholzstrasse 50b. Drop us a line to say which part you need and we'll have it ready.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003eQuestions about fit? Write to us at \u003ca href=\"mailto:office@coffeecoachingclub.ch\"\u003eoffice@coffeecoachingclub.ch\u003c\/a\u003e. We deliver across Switzerland and to Liechtenstein in 2-4 working days.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"Why does the new version cost more than the old one?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"They are two different parts with their own part numbers and their own design. The prices come from the respective purchase costs.\"}},{\"@type\":\"Question\",\"name\":\"How do I know which version I need?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The safest way is the number on the removed part or a photo of the support. Send it to us and we'll tell you which number fits.\"}},{\"@type\":\"Question\",\"name\":\"Is the metal carrier included?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"No, only the rubber is supplied.\"}},{\"@type\":\"Question\",\"name\":\"Does it also fit other Macap grinders?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Our documentation lists C00071911 for the LEO in the new version. It says nothing about other models.\"}},{\"@type\":\"Question\",\"name\":\"Can I pick up the part in the shop?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. We're in Bern at Gerberngasse 44 and in Zurich at Hagenholzstrasse 50b. Drop us a line to say which part you need.\"}}]}\u003c\/script\u003e\n\u003c\/div\u003e","brand":"Macap","offers":[{"title":"Default Title","offer_id":56309410464129,"sku":"A03893","price":15.84,"currency_code":"CHF","in_stock":true}]},{"product_id":"macap-gummifuss-leo-rocket-faustino-3-1","title":"Macap rubber foot for LEO and Rocket Faustino 3.1 – C247049","description":"\u003cdiv class=\"ccc-mobile-wrapper\"\u003e\n\u003cstyle\u003e.ccc-mobile-wrapper{max-width:880px;margin:0 auto;font-family:-apple-system,BlinkMacSystemFont,'Segoe UI',Roboto,Helvetica,Arial,sans-serif;color:#1d1d1f;line-height:1.65;font-size:17px}.ccc-mobile-wrapper h2{font-size:1.7em;line-height:1.25;margin:0 0 .6em;font-weight:700}.ccc-mobile-wrapper h3{font-size:1.3em;line-height:1.3;margin:1.8em 0 .5em;font-weight:700}.ccc-mobile-wrapper h4{font-size:1.05em;margin:1.1em 0 .2em}.ccc-mobile-wrapper p{margin:0 0 1em}.ccc-mobile-wrapper a{color:#0b6b5f;text-decoration:underline}.ccc-compare-table{width:100%;border-collapse:collapse;margin:1em 0;font-size:.97em}.ccc-compare-table th,.ccc-compare-table td{text-align:left;padding:10px 12px;border-bottom:1px solid #e3e3e6;vertical-align:top}.ccc-compare-table th{width:42%;font-weight:600;color:#3a3a3c}.ccc-roastery-tip{background:#eff6f4;border-left:4px solid #0b6b5f;border-radius:10px;padding:16px 18px;margin:1.6em 0}.ccc-return-note{background:#fdf3ef;border-left:4px solid #b4532a;border-radius:10px;padding:16px 18px;margin:1.6em 0}.ccc-faq h4{font-weight:700;margin:1.2em 0 .2em}@media(max-width:600px){.ccc-mobile-wrapper{font-size:16px}.ccc-mobile-wrapper h2{font-size:1.45em}.ccc-mobile-wrapper h3{font-size:1.18em}}\u003c\/style\u003e\n\u003ch2\u003eFour small feet keep the grinder steady\u003c\/h2\u003e\n\u003cp\u003eA grinder that wanders while grinding is usually standing on hard or worn feet. The rubber foot decouples the housing from the worktop: it absorbs the vibration of the grinding unit, keeps the machine in place and at the same time protects the surface underneath from scratches.\u003c\/p\u003e\n\u003cp\u003eOver the years, rubber hardens and loses its grip. Coffee oils and cleaning agents do the rest: the foot tears at the edge or comes loose from its thread. Then the grinder slides, the noise gets louder, and the container wobbles while dosing.\u003c\/p\u003e\n\u003ch3\u003eWhen it's due\u003c\/h3\u003e\n\u003cp\u003eIt's due when the grinder wanders or wobbles while grinding, when the rubber is hard, cracked or torn, when a foot is missing or when the machine leaves marks on the surface. It makes sense to replace feet as a set so that the machine stands level.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003ctable class=\"ccc-compare-table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eRubber foot\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation location\u003c\/th\u003e\n\u003ctd\u003eUnderside of the housing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003eMacap LEO and Rocket Faustino 3.1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eScope of delivery\u003c\/th\u003e\n\u003ctd\u003eOne foot. For a complete set, order the corresponding quantity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eC247049\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVersion\u003c\/th\u003e\n\u003ctd\u003eOur documentation does not specify diameter, height or thread\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eMacap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eWho it's for\u003c\/h3\u003e\n\u003cp\u003eFor anyone who wants to calm a wandering grinder with the cheapest part imaginable – and for businesses that renew all the feet at once during the annual service.\u003c\/p\u003e\n\u003ch3\u003eWhat goes with it\u003c\/h3\u003e\n\u003cp\u003eOther parts for the LEO are the \u003ca href=\"\/en\/products\/macap-flapper-leo\"\u003eFlapper C00044007\u003c\/a\u003e and the \u003ca href=\"\/en\/products\/macap-drehknopf-mahlgradeinstellung-leo-55\"\u003erotary knob for grind adjustment\u003c\/a\u003e. Parts for the Faustino can be found under \u003ca href=\"\/en\/collections\/ersatzteile-rocket-faustino-fausto\"\u003eRocket Faustino and Fausto spare parts\u003c\/a\u003e, the whole grinder section under \u003ca href=\"\/en\/collections\/ersatzteile-macap-puqpress\"\u003eMacap and PuqPress spare parts\u003c\/a\u003e and \u003ca href=\"\/en\/collections\/zubehor-und-ersatzteile-kaffeemuhlen\"\u003eCoffee grinder accessories and spare parts\u003c\/a\u003e.\u003c\/p\u003e\n\u003cdiv class=\"ccc-roastery-tip\"\u003e\n\u003cp\u003e\u003cstrong\u003eFrom our workshop in Bern and Zurich\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe always replace feet as a set and then check with a flat hand whether the grinder wobbles. A single new foot next to three flattened ones often makes the wandering worse rather than better – that's our routine, not a manufacturer's requirement. Afterwards we have a \u003ca href=\"\/en\/products\/nutty-delight-kaffee-blend-brasilien-indien\"\u003eNutty Delight\u003c\/a\u003e, sometimes the \u003ca href=\"\/en\/products\/cozy-chocolate-natural-brasilien-kaffeebohnen\"\u003eCozy Chocolate\u003c\/a\u003e or the \u003ca href=\"\/en\/products\/very-nutty-kraftiger-robusta-aus-indien\"\u003eVery Nutty\u003c\/a\u003e. The full selection can be found under \u003ca href=\"\/en\/collections\/kaffeebohnen\"\u003eCoffee beans\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ccc-return-note\"\u003e\n\u003cp\u003e\u003cstrong\u003eNo returns\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOriginal spare parts are excluded from exchange and return. They are sourced specifically for each order and cannot be resold after installation or a test fit on the machine. So before ordering, check the model, year of manufacture and serial number of your machine – or drop us a quick message and we'll clarify the fit together. Your rights in the event of defective goods remain unaffected.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ccc-faq\"\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003e\u003cstrong\u003eDo I get one foot or a set?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eThe price is for one foot. If you want to replace all of them, order the corresponding quantity.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eIs the foot screwed on or pushed in?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eOur documentation does not say. A look at the old foot will tell you reliably – if in doubt, send us a photo.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eDoes the same foot really fit both grinders?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eOur documentation lists C247049 for the Macap LEO and the Rocket Faustino 3.1. It says nothing about other years of manufacture of the Faustino – if in doubt, ask us.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eDoes a new foot help against loud grinding noise?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eAgainst the transfer of vibration to the worktop, yes. If the noise comes from the grinding unit itself, the foot is not the cause.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eCan I pick up the part at your shop?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eYes. We're in Bern at Gerberngasse 44 and in Zurich at Hagenholzstrasse 50b. Drop us a quick message saying which part you need and we'll have it ready for you.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003eQuestions about fit? Write to us at \u003ca href=\"mailto:office@coffeecoachingclub.ch\"\u003eoffice@coffeecoachingclub.ch\u003c\/a\u003e. We deliver across Switzerland and to Liechtenstein in 2-4 working days.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"Do I get one foot or a set?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The price is for one foot. If you want to replace all of them, order the corresponding quantity.\"}},{\"@type\":\"Question\",\"name\":\"Is the foot screwed on or pushed in?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Our documentation does not say. A look at the old foot will tell you reliably.\"}},{\"@type\":\"Question\",\"name\":\"Does the same foot fit both grinders?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Our documentation lists C247049 for the Macap LEO and the Rocket Faustino 3.1. It says nothing about other years of manufacture.\"}},{\"@type\":\"Question\",\"name\":\"Does a new foot help against loud grinding noise?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Against the transfer of vibration to the worktop, yes. If the noise comes from the grinding unit itself, the foot is not the cause.\"}},{\"@type\":\"Question\",\"name\":\"Can I pick up the part at the shop?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. We're in Bern at Gerberngasse 44 and in Zurich at Hagenholzstrasse 50b. Drop us a quick message saying which part you need.\"}}]}\u003c\/script\u003e\n\u003c\/div\u003e","brand":"Macap","offers":[{"title":"Default Title","offer_id":56309412495745,"sku":"A04006","price":2.2,"currency_code":"CHF","in_stock":true}]},{"product_id":"macap-pulverauffangschale-labo-d","title":"Macap grounds tray for the LABO D – C00072003","description":"\u003cdiv class=\"ccc-mobile-wrapper\"\u003e\n\u003cstyle\u003e.ccc-mobile-wrapper{max-width:880px;margin:0 auto;font-family:-apple-system,BlinkMacSystemFont,'Segoe UI',Roboto,Helvetica,Arial,sans-serif;color:#1d1d1f;line-height:1.65;font-size:17px}.ccc-mobile-wrapper h2{font-size:1.7em;line-height:1.25;margin:0 0 .6em;font-weight:700}.ccc-mobile-wrapper h3{font-size:1.3em;line-height:1.3;margin:1.8em 0 .5em;font-weight:700}.ccc-mobile-wrapper h4{font-size:1.05em;margin:1.1em 0 .2em}.ccc-mobile-wrapper p{margin:0 0 1em}.ccc-mobile-wrapper a{color:#0b6b5f;text-decoration:underline}.ccc-compare-table{width:100%;border-collapse:collapse;margin:1em 0;font-size:.97em}.ccc-compare-table th,.ccc-compare-table td{text-align:left;padding:10px 12px;border-bottom:1px solid #e3e3e6;vertical-align:top}.ccc-compare-table th{width:42%;font-weight:600;color:#3a3a3c}.ccc-roastery-tip{background:#eff6f4;border-left:4px solid #0b6b5f;border-radius:10px;padding:16px 18px;margin:1.6em 0}.ccc-return-note{background:#fdf3ef;border-left:4px solid #b4532a;border-radius:10px;padding:16px 18px;margin:1.6em 0}.ccc-faq h4{font-weight:700;margin:1.2em 0 .2em}@media(max-width:600px){.ccc-mobile-wrapper{font-size:16px}.ccc-mobile-wrapper h2{font-size:1.45em}.ccc-mobile-wrapper h3{font-size:1.18em}}\u003c\/style\u003e\n\u003ch2\u003eWhat misses ends up back where it belongs\u003c\/h2\u003e\n\u003cp\u003eWhatever doesn't land in the filter basket when dosing collects under the portafilter support. The grounds tray catches exactly that: ground coffee that falls past the edge and the fine dust that adds up to a surprising amount over the day. It can be removed, emptied and wiped out without having to move the grinder.\u003c\/p\u003e\n\u003cp\u003eA tray like this breaks through handling. It gets dropped, an edge breaks, a rib cracks – and then it no longer sits properly in its guide. The ground coffee finds its way past it, and the work surface under the grinder becomes a problem.\u003c\/p\u003e\n\u003ch3\u003eWhen it's due\u003c\/h3\u003e\n\u003cp\u003eIt's due when the tray has cracks or broken spots, when it no longer sits in the guide without play, when the plastic has warped or when ground coffee trickles underneath even with the tray in place.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003ctable class=\"ccc-compare-table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eGrounds tray\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation location\u003c\/th\u003e\n\u003ctd\u003eUnder the grinder's portafilter support\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003eMacap LABO D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eScope of delivery\u003c\/th\u003e\n\u003ctd\u003eOne tray\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eC00072003\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVersion\u003c\/th\u003e\n\u003ctd\u003eOur documentation gives no information on dimensions, colour or material\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eMacap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eWho it's for\u003c\/h3\u003e\n\u003cp\u003eFor businesses with a LABO D where the tray is handled several times a day – and for anyone who wants a proper spare part after a fall rather than a makeshift fix.\u003c\/p\u003e\n\u003ch3\u003eWhat goes with it\u003c\/h3\u003e\n\u003cp\u003eWe carry the matching grinder as the \u003ca href=\"\/en\/products\/macap-labo-70-d-stufenlos-schwarz\"\u003eMacap LABO 70 D stepless\u003c\/a\u003e. You'll find more Macap parts under \u003ca href=\"\/en\/collections\/ersatzteile-macap-puqpress\"\u003eMacap and PuqPress spare parts\u003c\/a\u003e, grinder cleaners under \u003ca href=\"\/en\/collections\/maschinen-und-muhlenreinigung\"\u003eMachine and grinder cleaning\u003c\/a\u003e and everything else under \u003ca href=\"\/en\/collections\/zubehor-und-ersatzteile-kaffeemuhlen\"\u003eCoffee grinder accessories and spare parts\u003c\/a\u003e.\u003c\/p\u003e\n\u003cdiv class=\"ccc-roastery-tip\"\u003e\n\u003cp\u003e\u003cstrong\u003eFrom our workshop in Bern and Zurich\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAt closing time we empty the tray and wipe it out dry instead of putting it back in wet. Damp grounds cake on and can later only be scraped off, which roughens the plastic – that's our routine, not a manufacturer's specification. Afterwards there's a \u003ca href=\"\/en\/products\/nutty-delight-kaffee-blend-brasilien-indien\"\u003eNutty Delight\u003c\/a\u003e, sometimes the \u003ca href=\"\/en\/products\/cozy-chocolate-natural-brasilien-kaffeebohnen\"\u003eCozy Chocolate\u003c\/a\u003e or the \u003ca href=\"\/en\/products\/very-nutty-kraftiger-robusta-aus-indien\"\u003eVery Nutty\u003c\/a\u003e. You'll find the full selection under \u003ca href=\"\/en\/collections\/kaffeebohnen\"\u003eCoffee beans\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ccc-return-note\"\u003e\n\u003cp\u003e\u003cstrong\u003eNo returns\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOriginal spare parts are excluded from exchange and return. They are sourced specifically for each order and cannot be resold once they have been installed or test-fitted on the device. So before ordering, check the model, year of manufacture and serial number of your machine – or drop us a line and we'll clarify the fit together. Your rights in the case of defective goods remain unaffected.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ccc-faq\"\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003e\u003cstrong\u003eDoes the tray also fit the LABO 70 D?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eOur documentation lists C00072003 for the LABO D. We're happy to check in advance whether your version takes the same tray – send us a photo or the serial number.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eIs the portafilter support included?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eNo, only the tray is supplied.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eCan it go in the dishwasher?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eOur documentation gives no information on this. From experience, we clean plastic parts by hand because they can warp in the dishwasher.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eWhat colour is the tray?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eOur documentation says nothing about the colour. If it matters to you, just ask us before ordering.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eCan I pick up the part from your shop?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eYes. We're in Bern at Gerberngasse 44 and in Zurich at Hagenholzstrasse 50b. Drop us a line telling us which part you need and we'll have it ready.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003eQuestions about fit? Write to us at \u003ca href=\"mailto:office@coffeecoachingclub.ch\"\u003eoffice@coffeecoachingclub.ch\u003c\/a\u003e. We deliver across Switzerland and to Liechtenstein in 2-4 working days.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"Does the tray also fit the LABO 70 D?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Our documentation lists C00072003 for the LABO D. We're happy to check in advance whether your version takes the same tray.\"}},{\"@type\":\"Question\",\"name\":\"Is the portafilter support included?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"No, only the tray is supplied.\"}},{\"@type\":\"Question\",\"name\":\"Can it go in the dishwasher?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Our documentation gives no information on this. From experience, we clean plastic parts by hand.\"}},{\"@type\":\"Question\",\"name\":\"What colour is the tray?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Our documentation says nothing about the colour. Just ask us before ordering if it matters.\"}},{\"@type\":\"Question\",\"name\":\"Can I pick up the part in the shop?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. We're in Bern at Gerberngasse 44 and in Zurich at Hagenholzstrasse 50b. Drop us a line telling us which part you need.\"}}]}\u003c\/script\u003e\n\u003c\/div\u003e","brand":"Macap","offers":[{"title":"Default Title","offer_id":56309412528513,"sku":"A03557","price":42.9,"currency_code":"CHF","in_stock":true}]},{"product_id":"macap-wahlknopf-komplett-mxd","title":"Macap complete selector knob for the MXD – C204011","description":"\u003cdiv class=\"ccc-mobile-wrapper\"\u003e\n\u003cstyle\u003e.ccc-mobile-wrapper{max-width:880px;margin:0 auto;font-family:-apple-system,BlinkMacSystemFont,'Segoe UI',Roboto,Helvetica,Arial,sans-serif;color:#1d1d1f;line-height:1.65;font-size:17px}.ccc-mobile-wrapper h2{font-size:1.7em;line-height:1.25;margin:0 0 .6em;font-weight:700}.ccc-mobile-wrapper h3{font-size:1.3em;line-height:1.3;margin:1.8em 0 .5em;font-weight:700}.ccc-mobile-wrapper h4{font-size:1.05em;margin:1.1em 0 .2em}.ccc-mobile-wrapper p{margin:0 0 1em}.ccc-mobile-wrapper a{color:#0b6b5f;text-decoration:underline}.ccc-compare-table{width:100%;border-collapse:collapse;margin:1em 0;font-size:.97em}.ccc-compare-table th,.ccc-compare-table td{text-align:left;padding:10px 12px;border-bottom:1px solid #e3e3e6;vertical-align:top}.ccc-compare-table th{width:42%;font-weight:600;color:#3a3a3c}.ccc-roastery-tip{background:#eff6f4;border-left:4px solid #0b6b5f;border-radius:10px;padding:16px 18px;margin:1.6em 0}.ccc-return-note{background:#fdf3ef;border-left:4px solid #b4532a;border-radius:10px;padding:16px 18px;margin:1.6em 0}.ccc-faq h4{font-weight:700;margin:1.2em 0 .2em}@media(max-width:600px){.ccc-mobile-wrapper{font-size:16px}.ccc-mobile-wrapper h2{font-size:1.45em}.ccc-mobile-wrapper h3{font-size:1.18em}}\u003c\/style\u003e\n\u003ch2\u003eThe knob every shift touches a hundred times\u003c\/h2\u003e\n\u003cp\u003eThe selector knob is where the grinder is operated. It gets pressed or turned every day, by changing hands, often with damp fingers – and that is exactly why it is one of the first parts to show wear on an otherwise healthy MXD.\u003c\/p\u003e\n\u003cp\u003eIt rarely breaks all at once. First the markings fade, then the knob sits more loosely on its spindle, eventually the guide in the plastic breaks and it jams. It is supplied complete, i.e. with the parts that hold it in place.\u003c\/p\u003e\n\u003ch3\u003eWhen it is due\u003c\/h3\u003e\n\u003cp\u003eIt is due when the knob wobbles or can be twisted out of position, when it sticks or no longer returns cleanly, when the plastic is cracked or broken, or when the markings have faded so much that operating the grinder becomes guesswork.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003ctable class=\"ccc-compare-table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eSelector knob, complete\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation location\u003c\/th\u003e\n\u003ctd\u003eControl side of the grinder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003eMacap MXD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eScope of delivery\u003c\/th\u003e\n\u003ctd\u003eOne complete selector knob. Our documentation does not state which individual parts are included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eC204011\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVersion\u003c\/th\u003e\n\u003ctd\u003eOur documentation gives no information on colour, material or dimensions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eInstallation by a qualified technician recommended\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eMacap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eImportant for installation\u003c\/h3\u003e\n\u003cp\u003eThe knob sits on the control side, directly in front of the switch behind it. Before pulling it off, disconnect the grinder from the mains. If you need to work on the switch itself, leave that to a qualified technician – we deliberately do not give step-by-step instructions here.\u003c\/p\u003e\n\u003ch3\u003eWho it is for\u003c\/h3\u003e\n\u003cp\u003eFor businesses with an MXD in continuous use that want to replace a worn control part before it damages the switch behind it when it jams.\u003c\/p\u003e\n\u003ch3\u003eWhat goes with it\u003c\/h3\u003e\n\u003cp\u003eRelated control parts in the Macap range are the \u003ca href=\"\/en\/products\/macap-drehknopf-mahlgradeinstellung-leo-55\"\u003erotary knob for the grind adjustment of the Leo 55\u003c\/a\u003e and the \u003ca href=\"\/en\/products\/drucktaster-bedienrad-zu-macap-m4d\"\u003epush button for the control wheel of the M4D\u003c\/a\u003e. The whole category is under \u003ca href=\"\/en\/collections\/ersatzteile-macap-puqpress\"\u003eMacap and PuqPress spare parts\u003c\/a\u003e, more grinder parts under \u003ca href=\"\/en\/collections\/zubehor-und-ersatzteile-kaffeemuhlen\"\u003eCoffee grinder accessories and spare parts\u003c\/a\u003e.\u003c\/p\u003e\n\u003cdiv class=\"ccc-roastery-tip\"\u003e\n\u003cp\u003e\u003cstrong\u003eFrom our workshop in Bern and Zurich\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe only wipe control parts with a damp cloth, never a wet one, and keep descaler away from them. What eats away the markings on knobs is almost always cleaning agent, not use – that is our routine, not a manufacturer specification. Afterwards there is a \u003ca href=\"\/en\/products\/nutty-delight-kaffee-blend-brasilien-indien\"\u003eNutty Delight\u003c\/a\u003e, sometimes the \u003ca href=\"\/en\/products\/cozy-chocolate-natural-brasilien-kaffeebohnen\"\u003eCozy Chocolate\u003c\/a\u003e or the \u003ca href=\"\/en\/products\/very-nutty-kraftiger-robusta-aus-indien\"\u003eVery Nutty\u003c\/a\u003e. The full selection is under \u003ca href=\"\/en\/collections\/kaffeebohnen\"\u003eCoffee beans\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ccc-return-note\"\u003e\n\u003cp\u003e\u003cstrong\u003eNo returns\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOriginal spare parts are excluded from exchange and return. They are sourced specifically for each order and cannot be resold once they have been installed or test-fitted on a machine. So before ordering, check the model, year of manufacture and serial number of your machine – or drop us a quick message and we will clarify the fit together. Your rights in the event of defective goods remain unaffected.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ccc-faq\"\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003e\u003cstrong\u003eIs the switch behind it included?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eNo. The selector knob is supplied as a control part. The switch behind it is a separate part.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eWhat does complete mean here?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eOur documentation lists the item as a complete selector knob without naming the individual parts. If you need to know exactly what is included, just ask us before ordering.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eDoes it also fit other Macap grinders?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eOur documentation names the MXD. It says nothing about other models – send us a photo of the control side and we will check.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eCan I replace it myself?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003ePulling off the knob is usually straightforward, but it sits directly in front of the switch. We recommend installation by a qualified technician and, in any case, disconnecting the grinder from the mains.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eCan I pick up the part from your shop?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eYes. We are in Bern at Gerberngasse 44 and in Zurich at Hagenholzstrasse 50b. Drop us a quick message saying which part you need and we will have it ready for you.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003eQuestions about the fit? Write to us at \u003ca href=\"mailto:office@coffeecoachingclub.ch\"\u003eoffice@coffeecoachingclub.ch\u003c\/a\u003e. We deliver across Switzerland and to Liechtenstein in 2-4 working days.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"Is the switch behind it included?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"No. The selector knob is supplied as a control part. The switch behind it is a separate part.\"}},{\"@type\":\"Question\",\"name\":\"What does complete mean here?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Our documentation lists the item as a complete selector knob without naming the individual parts. Just ask us before ordering.\"}},{\"@type\":\"Question\",\"name\":\"Does it also fit other Macap grinders?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Our documentation names the MXD. It says nothing about other models. Send us a photo of the control side.\"}},{\"@type\":\"Question\",\"name\":\"Can I replace it myself?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Pulling it off is usually straightforward, but it sits directly in front of the switch. We recommend installation by a qualified technician and disconnecting the grinder from the mains.\"}},{\"@type\":\"Question\",\"name\":\"Can I pick up the part from your shop?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. We are in Bern at Gerberngasse 44 and in Zurich at Hagenholzstrasse 50b. Drop us a quick message saying which part you need.\"}}]}\u003c\/script\u003e\n\u003c\/div\u003e","brand":"Macap","offers":[{"title":"Default Title","offer_id":56309413740929,"sku":"A04881","price":13.64,"currency_code":"CHF","in_stock":true}]},{"product_id":"puqpress-unterer-klemmring-m3-m4-m5-m6-matt-chrom","title":"PuqPress Lower Clamping Ring for M3, M4, M5 and M6 – Matt Chrome-Plated, 1-210-0246-5","description":"\u003cdiv class=\"ccc-mobile-wrapper\"\u003e\n\u003cstyle\u003e.ccc-mobile-wrapper{max-width:880px;margin:0 auto;font-family:-apple-system,BlinkMacSystemFont,'Segoe UI',Roboto,Helvetica,Arial,sans-serif;color:#1d1d1f;line-height:1.65;font-size:17px}.ccc-mobile-wrapper h2{font-size:1.7em;line-height:1.25;margin:0 0 .6em;font-weight:700}.ccc-mobile-wrapper h3{font-size:1.3em;line-height:1.3;margin:1.8em 0 .5em;font-weight:700}.ccc-mobile-wrapper h4{font-size:1.05em;margin:1.1em 0 .2em}.ccc-mobile-wrapper p{margin:0 0 1em}.ccc-mobile-wrapper a{color:#0b6b5f;text-decoration:underline}.ccc-compare-table{width:100%;border-collapse:collapse;margin:1em 0;font-size:.97em}.ccc-compare-table th,.ccc-compare-table td{text-align:left;padding:10px 12px;border-bottom:1px solid #e3e3e6;vertical-align:top}.ccc-compare-table th{width:42%;font-weight:600;color:#3a3a3c}.ccc-roastery-tip{background:#eff6f4;border-left:4px solid #0b6b5f;border-radius:10px;padding:16px 18px;margin:1.6em 0}.ccc-return-note{background:#fdf3ef;border-left:4px solid #b4532a;border-radius:10px;padding:16px 18px;margin:1.6em 0}.ccc-faq h4{font-weight:700;margin:1.2em 0 .2em}@media(max-width:600px){.ccc-mobile-wrapper{font-size:16px}.ccc-mobile-wrapper h2{font-size:1.45em}.ccc-mobile-wrapper h3{font-size:1.18em}}\u003c\/style\u003e\n\u003ch2\u003eThe portafilter sits firmly again when the tamper comes down\u003c\/h2\u003e\n\u003cp\u003eDuring automatic tamping, the ram presses into the portafilter with considerable force. So that nothing shifts, the portafilter is held between two clamping rings – the lower one receives it and keeps it centred until the ram is back up. If this guidance is off, the device tamps at an angle.\u003c\/p\u003e\n\u003cp\u003eThe clamping ring is a part that is in use on every shift. The coating wears bare, the edge takes knocks from inserting the portafilter, and at some point the portafilter no longer sits snugly. This version is matt chrome-plated and belongs to the M3, M4, M5 and M6 models.\u003c\/p\u003e\n\u003ch3\u003eWhen it's due\u003c\/h3\u003e\n\u003cp\u003eIt's due when the portafilter has play in the ring or can be twisted, when the tamp becomes lopsided, when the edge shows knocks or chips, or when the coating is peeling off.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003ctable class=\"ccc-compare-table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eLower clamping ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation location\u003c\/th\u003e\n\u003ctd\u003ePortafilter holder of the tamper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003ePuqPress M3, M4, M5 and M6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eScope of delivery\u003c\/th\u003e\n\u003ctd\u003eOne clamping ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003e1-210-0246-5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eMatt chrome-plated. Our documentation gives no information on diameter or base material\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eInstallation by a specialist recommended\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003ePuqPress\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eImportant for installation\u003c\/h3\u003e\n\u003cp\u003eThe clamping ring is part of the holder, where considerable forces act during tamping. Before any work, the device is disconnected from the mains. After the replacement, the centring must be checked – a ring fitted slightly off-centre leads to exactly the uneven tamp you wanted to fix. We deliberately do not provide step-by-step instructions here.\u003c\/p\u003e\n\u003ch3\u003eWho it's for\u003c\/h3\u003e\n\u003cp\u003eFor bars running a PuqPress in continuous operation and for service companies getting an unevenly tamping machine back on track.\u003c\/p\u003e\n\u003ch3\u003eWhat goes with it\u003c\/h3\u003e\n\u003cp\u003eWe carry the device itself as the \u003ca href=\"\/en\/products\/puqpress-mini\"\u003ePuqpress Mini\u003c\/a\u003e. Further parts are listed in the category \u003ca href=\"\/en\/collections\/ersatzteile-macap-puqpress\"\u003eSpare parts Macap and PuqPress\u003c\/a\u003e and under \u003ca href=\"\/en\/collections\/puqpress\"\u003ePuqpress\u003c\/a\u003e. You'll find everything else on grinders and tamping under \u003ca href=\"\/en\/collections\/serviceteile\"\u003eOriginal spare parts\u003c\/a\u003e.\u003c\/p\u003e\n\u003cdiv class=\"ccc-roastery-tip\"\u003e\n\u003cp\u003e\u003cstrong\u003eFrom our workshop in Bern and Zurich\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAfter the replacement, we first check with an empty portafilter whether it can be inserted without tilting, and only then with coffee. If you test straight away with a puck, you only see the misalignment in the extraction – this is our routine, not a manufacturer specification. For readjusting, we like to use \u003ca href=\"\/en\/products\/nutty-delight-kaffee-blend-brasilien-indien\"\u003eNutty Delight\u003c\/a\u003e, otherwise \u003ca href=\"\/en\/products\/cozy-chocolate-natural-brasilien-kaffeebohnen\"\u003eCozy Chocolate\u003c\/a\u003e or \u003ca href=\"\/en\/products\/very-nutty-kraftiger-robusta-aus-indien\"\u003eVery Nutty\u003c\/a\u003e. The full selection is under \u003ca href=\"\/en\/collections\/kaffeebohnen\"\u003eCoffee beans\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ccc-return-note\"\u003e\n\u003cp\u003e\u003cstrong\u003eNo returns\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOriginal spare parts are excluded from exchange and return. They are sourced specifically for each order and cannot be resold once they have been installed or test-fitted on a device. So before ordering, check the model, year of manufacture and serial number of your machine – or drop us a quick message and we'll clarify the fit together. Your rights in the case of defective goods remain unaffected.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ccc-faq\"\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003e\u003cstrong\u003eDo I also need the upper clamping ring?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eNot necessarily. If both are worn, it's worth replacing them as a pair – if only the lower one is damaged, this part is enough.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eDoes the ring fit my portafilter diameter?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eOur documentation lists it for the M3 to M6 models without stating a diameter. Let us know which device and which portafilter you use, and we'll check the fit.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eWhat does matt chrome-plated mean?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eIt describes the surface, not the base material. Our documentation gives no information on the base material.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eIs mounting hardware included?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eThe clamping ring is supplied. Whether additional screws on your device need replacing will become clear on removal.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eCan I pick up the part at your shop?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eYes. We're in Bern at Gerberngasse 44 and in Zurich at Hagenholzstrasse 50b. Drop us a quick message saying which part you need, and we'll have it ready.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003eQuestions about the fit? Write to us at \u003ca href=\"mailto:office@coffeecoachingclub.ch\"\u003eoffice@coffeecoachingclub.ch\u003c\/a\u003e. We deliver across Switzerland and to Liechtenstein in 2-4 working days.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"Do I also need the upper clamping ring?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Not necessarily. If both are worn, it's worth replacing them as a pair. If only the lower one is damaged, this part is enough.\"}},{\"@type\":\"Question\",\"name\":\"Does the ring fit my portafilter diameter?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Our documentation lists it for the M3 to M6 models without stating a diameter. Let us know which device you use.\"}},{\"@type\":\"Question\",\"name\":\"What does matt chrome-plated mean?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"It describes the surface, not the base material. Our documentation gives no information on the base material.\"}},{\"@type\":\"Question\",\"name\":\"Is mounting hardware included?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The clamping ring is supplied. Whether additional screws need replacing will become clear on removal.\"}},{\"@type\":\"Question\",\"name\":\"Can I pick up the part in the shop?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. We're in Bern at Gerberngasse 44 and in Zurich at Hagenholzstrasse 50b. Drop us a quick message saying which part you need.\"}}]}\u003c\/script\u003e\n\u003c\/div\u003e","brand":"PuqPress","offers":[{"title":"Default Title","offer_id":56309413773697,"sku":"A04548","price":111.21,"currency_code":"CHF","in_stock":true}]},{"product_id":"puqpress-schlitten-siebtraegerauflage-m5","title":"PuqPress Slide for the Portafilter Support M5 – 1-110-0149-1","description":"\u003cdiv class=\"ccc-mobile-wrapper\"\u003e\n\u003cstyle\u003e.ccc-mobile-wrapper{max-width:880px;margin:0 auto;font-family:-apple-system,BlinkMacSystemFont,'Segoe UI',Roboto,Helvetica,Arial,sans-serif;color:#1d1d1f;line-height:1.65;font-size:17px}.ccc-mobile-wrapper h2{font-size:1.7em;line-height:1.25;margin:0 0 .6em;font-weight:700}.ccc-mobile-wrapper h3{font-size:1.3em;line-height:1.3;margin:1.8em 0 .5em;font-weight:700}.ccc-mobile-wrapper h4{font-size:1.05em;margin:1.1em 0 .2em}.ccc-mobile-wrapper p{margin:0 0 1em}.ccc-mobile-wrapper a{color:#0b6b5f;text-decoration:underline}.ccc-compare-table{width:100%;border-collapse:collapse;margin:1em 0;font-size:.97em}.ccc-compare-table th,.ccc-compare-table td{text-align:left;padding:10px 12px;border-bottom:1px solid #e3e3e6;vertical-align:top}.ccc-compare-table th{width:42%;font-weight:600;color:#3a3a3c}.ccc-roastery-tip{background:#eff6f4;border-left:4px solid #0b6b5f;border-radius:10px;padding:16px 18px;margin:1.6em 0}.ccc-return-note{background:#fdf3ef;border-left:4px solid #b4532a;border-radius:10px;padding:16px 18px;margin:1.6em 0}.ccc-faq h4{font-weight:700;margin:1.2em 0 .2em}@media(max-width:600px){.ccc-mobile-wrapper{font-size:16px}.ccc-mobile-wrapper h2{font-size:1.45em}.ccc-mobile-wrapper h3{font-size:1.18em}}\u003c\/style\u003e\n\u003ch2\u003eThe small part the support can't guide cleanly without\u003c\/h2\u003e\n\u003cp\u003eThe slide belongs to the tamper's portafilter support. It guides the support along its track so that the portafilter always ends up in the same position when you insert it – and that is exactly what makes the ram come down centred on the puck rather than at an angle.\u003c\/p\u003e\n\u003cp\u003eIt is an inexpensive part in an expensive place. When it is worn or broken, you don't notice straight away: the support develops some play, the portafilter sits slightly off-centre, and at the bar this shows up as unevenly extracted espresso whose cause you first look for elsewhere.\u003c\/p\u003e\n\u003ch3\u003eWhen it is due\u003c\/h3\u003e\n\u003cp\u003eIt is due when the portafilter support has play or wobbles, when it catches in its track, when the slide is visibly worn or broken – or when it was removed anyway during the last service.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003ctable class=\"ccc-compare-table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eSlide for the portafilter support. Listed in our documentation as the M6 slide\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation location\u003c\/th\u003e\n\u003ctd\u003ePortafilter support of the tamper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003ePuqPress M5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eScope of delivery\u003c\/th\u003e\n\u003ctd\u003eOne slide\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003e1-110-0149-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDesign\u003c\/th\u003e\n\u003ctd\u003eOur documentation gives no information on material and dimensions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eInstallation by a specialist recommended\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003ePuqPress\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eImportant for installation\u003c\/h3\u003e\n\u003cp\u003eThe slide sits in the tamper's moving mount. Disconnect the machine from the mains before working on it. After installation, check that the support runs without play and without catching along its entire travel. We deliberately do not provide step-by-step instructions here.\u003c\/p\u003e\n\u003ch3\u003eWho it is for\u003c\/h3\u003e\n\u003cp\u003eFor service companies and for bars that replace the inexpensive wear part at the same time while the machine is open anyway.\u003c\/p\u003e\n\u003ch3\u003eWhat goes with it\u003c\/h3\u003e\n\u003cp\u003eThe \u003ca href=\"\/en\/products\/puqpress-schraube-m6x14-federring-siebtraegerauflage-m5\"\u003eM6 × 14 screw with spring washer\u003c\/a\u003e belongs to the same assembly. Also on the portafilter mount is the \u003ca href=\"\/en\/products\/puqpress-unterer-klemmring-m3-m4-m5-m6-matt-chrom\"\u003elower clamping ring for M3 to M6\u003c\/a\u003e. The whole range is listed under \u003ca href=\"\/en\/collections\/ersatzteile-macap-puqpress\"\u003eMacap and PuqPress spare parts\u003c\/a\u003e and under \u003ca href=\"\/en\/collections\/puqpress\"\u003ePuqpress\u003c\/a\u003e.\u003c\/p\u003e\n\u003cdiv class=\"ccc-roastery-tip\"\u003e\n\u003cp\u003e\u003cstrong\u003eFrom our workshop in Bern and Zurich\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe order the slide and screw together, even if only one of them looks defective. Together they cost less than a second trip to the machine – that is our routine, not a manufacturer requirement. After the test run there is a \u003ca href=\"\/en\/products\/nutty-delight-kaffee-blend-brasilien-indien\"\u003eNutty Delight\u003c\/a\u003e, sometimes the \u003ca href=\"\/en\/products\/cozy-chocolate-natural-brasilien-kaffeebohnen\"\u003eCozy Chocolate\u003c\/a\u003e or the \u003ca href=\"\/en\/products\/very-nutty-kraftiger-robusta-aus-indien\"\u003eVery Nutty\u003c\/a\u003e. The full selection is listed under \u003ca href=\"\/en\/collections\/kaffeebohnen\"\u003eCoffee beans\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ccc-return-note\"\u003e\n\u003cp\u003e\u003cstrong\u003eNo returns\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOriginal spare parts are excluded from exchange and return. They are procured specifically for each order and cannot be resold after installation or a test fitting on the machine. So before ordering, check the model, year of manufacture and serial number of your machine – or drop us a line and we will clarify the fit together. Your rights in the event of defective goods remain unaffected.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ccc-faq\"\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003e\u003cstrong\u003eWhat does the M6 in the designation stand for?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eOur documentation lists the part as the M6 slide and assigns it to the PuqPress M5, without explaining the designation. We deliberately do not interpret it here – what counts is the number 1-110-0149-1.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eIs the screw included?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eNo, the M6 × 14 screw with spring washer is a separate item.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eDoes the slide also fit the M3, M4 or M6?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eOur documentation names the M5. It says nothing about the other models – write to us and tell us which machine you have, and we will check it.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eDo I need special tools?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eOur documentation gives no information on this. As the slide sits in the moving mount, we recommend installation by a specialist.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eCan I pick up the part from your shop?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eYes. We are in Bern at Gerberngasse 44 and in Zurich at Hagenholzstrasse 50b. Drop us a line telling us which part you need, and we will have it ready for you.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003eQuestions about the fit? Write to us at \u003ca href=\"mailto:office@coffeecoachingclub.ch\"\u003eoffice@coffeecoachingclub.ch\u003c\/a\u003e. We deliver across Switzerland and to Liechtenstein in 2-4 working days.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"What does the M6 in the designation stand for?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Our documentation lists the part as the M6 slide and assigns it to the PuqPress M5, without explaining the designation. What counts is the number 1-110-0149-1.\"}},{\"@type\":\"Question\",\"name\":\"Is the screw included?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"No, the M6 x 14 screw with spring washer is a separate item.\"}},{\"@type\":\"Question\",\"name\":\"Does the slide also fit the M3, M4 or M6?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Our documentation names the M5. It says nothing about the other models. Write to us and tell us which machine you have.\"}},{\"@type\":\"Question\",\"name\":\"Do I need special tools?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Our documentation gives no information on this. As the slide sits in the moving mount, we recommend installation by a specialist.\"}},{\"@type\":\"Question\",\"name\":\"Can I pick up the part from the shop?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. We are in Bern at Gerberngasse 44 and in Zurich at Hagenholzstrasse 50b. Drop us a line telling us which part you need.\"}}]}\u003c\/script\u003e\n\u003c\/div\u003e","brand":"PuqPress","offers":[{"title":"Default Title","offer_id":56309414363521,"sku":"A03729","price":2.97,"currency_code":"CHF","in_stock":true}]},{"product_id":"puqpress-schraube-m6x14-federring-siebtraegerauflage-m5","title":"PuqPress M6 × 14 screw with spring washer for the M5 portafilter support – 1-110-0098-1","description":"\u003cdiv class=\"ccc-mobile-wrapper\"\u003e\n\u003cstyle\u003e.ccc-mobile-wrapper{max-width:880px;margin:0 auto;font-family:-apple-system,BlinkMacSystemFont,'Segoe UI',Roboto,Helvetica,Arial,sans-serif;color:#1d1d1f;line-height:1.65;font-size:17px}.ccc-mobile-wrapper h2{font-size:1.7em;line-height:1.25;margin:0 0 .6em;font-weight:700}.ccc-mobile-wrapper h3{font-size:1.3em;line-height:1.3;margin:1.8em 0 .5em;font-weight:700}.ccc-mobile-wrapper h4{font-size:1.05em;margin:1.1em 0 .2em}.ccc-mobile-wrapper p{margin:0 0 1em}.ccc-mobile-wrapper a{color:#0b6b5f;text-decoration:underline}.ccc-compare-table{width:100%;border-collapse:collapse;margin:1em 0;font-size:.97em}.ccc-compare-table th,.ccc-compare-table td{text-align:left;padding:10px 12px;border-bottom:1px solid #e3e3e6;vertical-align:top}.ccc-compare-table th{width:42%;font-weight:600;color:#3a3a3c}.ccc-roastery-tip{background:#eff6f4;border-left:4px solid #0b6b5f;border-radius:10px;padding:16px 18px;margin:1.6em 0}.ccc-return-note{background:#fdf3ef;border-left:4px solid #b4532a;border-radius:10px;padding:16px 18px;margin:1.6em 0}.ccc-faq h4{font-weight:700;margin:1.2em 0 .2em}@media(max-width:600px){.ccc-mobile-wrapper{font-size:16px}.ccc-mobile-wrapper h2{font-size:1.45em}.ccc-mobile-wrapper h3{font-size:1.18em}}\u003c\/style\u003e\n\u003ch2\u003eThe screw that shouldn't work itself loose\u003c\/h2\u003e\n\u003cp\u003eOn the portafilter support of an automatic tamper, a ram force acts against the screw connection with every cycle. That's exactly why there's a spring washer under the head: it maintains the preload when the constant load changes would otherwise slowly loosen the joint.\u003c\/p\u003e\n\u003cp\u003eIt's a part costing less than a franc, yet it determines how smoothly the whole mount runs. A spring washer that has long since been flattened or a rounded-out hex socket is reason enough not to reuse it.\u003c\/p\u003e\n\u003ch3\u003eWhen it's due\u003c\/h3\u003e\n\u003cp\u003eIt's due when the screw connection keeps coming loose, when the spring washer is flattened, when the screw head is rounded out or the thread is damaged – and as a rule whenever it has been removed once during servicing.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003ctable class=\"ccc-compare-table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eM6 × 14 screw including spring washer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation location\u003c\/th\u003e\n\u003ctd\u003ePortafilter support of the tamper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003ePuqPress M5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eScope of delivery\u003c\/th\u003e\n\u003ctd\u003eOne screw with spring washer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003e1-110-0098-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003ctd\u003eM6 thread, length 14 mm. Our documentation gives no information on head shape or material\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eInstallation by a qualified technician recommended\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003ePuqPress\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eImportant for installation\u003c\/h3\u003e\n\u003cp\u003eThe screw sits in a joint that absorbs force during tamping. Before any work, the device is disconnected from the mains, and the tightening torque follows the device's service documentation, not gut feeling – a stripped M6 thread in an aluminium housing costs far more than this screw. We deliberately don't provide step-by-step instructions here.\u003c\/p\u003e\n\u003ch3\u003eWho it's for\u003c\/h3\u003e\n\u003cp\u003eFor service workshops that replace the fastening hardware instead of reusing it when dismantling the mount – and for anyone who has lost a screw along the way.\u003c\/p\u003e\n\u003ch3\u003eWhat goes with it\u003c\/h3\u003e\n\u003cp\u003eIt belongs to the \u003ca href=\"\/en\/products\/puqpress-schlitten-siebtraegerauflage-m5\"\u003eslide for the M5 portafilter support\u003c\/a\u003e. On the same mount you'll also find the \u003ca href=\"\/en\/products\/puqpress-unterer-klemmring-m3-m4-m5-m6-matt-chrom\"\u003elower clamping ring for M3 to M6\u003c\/a\u003e. The whole category is listed under \u003ca href=\"\/en\/collections\/ersatzteile-macap-puqpress\"\u003eMacap and PuqPress spare parts\u003c\/a\u003e and under \u003ca href=\"\/en\/collections\/puqpress\"\u003ePuqpress\u003c\/a\u003e.\u003c\/p\u003e\n\u003cdiv class=\"ccc-roastery-tip\"\u003e\n\u003cp\u003e\u003cstrong\u003eFrom our workshop in Bern and Zurich\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWith every tamper service, we put one or two of these screws in the box. It's annoying to plan a second trip because of a part worth a few cents – that's our routine, not a manufacturer requirement. After the test run, we have a \u003ca href=\"\/en\/products\/nutty-delight-kaffee-blend-brasilien-indien\"\u003eNutty Delight\u003c\/a\u003e, sometimes the \u003ca href=\"\/en\/products\/cozy-chocolate-natural-brasilien-kaffeebohnen\"\u003eCozy Chocolate\u003c\/a\u003e or the \u003ca href=\"\/en\/products\/very-nutty-kraftiger-robusta-aus-indien\"\u003eVery Nutty\u003c\/a\u003e. You'll find the full selection under \u003ca href=\"\/en\/collections\/kaffeebohnen\"\u003eCoffee beans\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ccc-return-note\"\u003e\n\u003cp\u003e\u003cstrong\u003eNo returns\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOriginal spare parts are excluded from exchange and return. They are sourced specifically for each order and can't be resold after being installed or test-fitted on the device. So before ordering, check the model, year of manufacture and serial number of your machine – or drop us a line and we'll check the fit together. Your rights in the event of defective goods remain unaffected.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ccc-faq\"\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003e\u003cstrong\u003eDo I get one screw or several?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eThe price is for one screw including spring washer. If you need several, order the corresponding quantity.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eIs the spring washer available separately?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eOur documentation lists both together under one number. The washer isn't listed there on its own.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eWhat head shape does the screw have?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eOur documentation gives no information on this. We don't state anything here that we can't back up – if in doubt, comparing it with the old screw will tell you the rest.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eDoes it also fit the M3, M4 or M6?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eOur documentation names the M5. It says nothing about the other models – let us know which device you have and we'll check it.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eCan I pick up the part at your shop?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eYes. We're in Bern at Gerberngasse 44 and in Zurich at Hagenholzstrasse 50b. Drop us a line to let us know which part you need and we'll have it ready for you.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003eQuestions about the fit? Write to us at \u003ca href=\"mailto:office@coffeecoachingclub.ch\"\u003eoffice@coffeecoachingclub.ch\u003c\/a\u003e. We deliver across Switzerland and to Liechtenstein in 2-4 working days.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"Do I get one screw or several?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The price is for one screw including spring washer. If you need several, order the corresponding quantity.\"}},{\"@type\":\"Question\",\"name\":\"Is the spring washer available separately?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Our documentation lists both together under one number. The washer isn't listed there on its own.\"}},{\"@type\":\"Question\",\"name\":\"What head shape does the screw have?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Our documentation gives no information on this. Comparing it with the old screw will tell you the rest.\"}},{\"@type\":\"Question\",\"name\":\"Does it also fit the M3, M4 or M6?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Our documentation names the M5. It says nothing about the other models. Let us know which device you have.\"}},{\"@type\":\"Question\",\"name\":\"Can I pick up the part at the shop?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. We're in Bern at Gerberngasse 44 and in Zurich at Hagenholzstrasse 50b. Drop us a line to let us know which part you need.\"}}]}\u003c\/script\u003e\n\u003c\/div\u003e","brand":"PuqPress","offers":[{"title":"Default Title","offer_id":56309414396289,"sku":"A03773","price":0.88,"currency_code":"CHF","in_stock":true}]},{"product_id":"puqpress-fuehrungsring-61x2-5-m3-m4-m5-m6","title":"PuqPress guide ring 61 × 2.5 mm for M3, M4, M5 and M6 – 1-210-0269-2","description":"\u003cdiv class=\"ccc-mobile-wrapper\"\u003e\n\u003cstyle\u003e.ccc-mobile-wrapper{max-width:880px;margin:0 auto;font-family:-apple-system,BlinkMacSystemFont,'Segoe UI',Roboto,Helvetica,Arial,sans-serif;color:#1d1d1f;line-height:1.65;font-size:17px}.ccc-mobile-wrapper h2{font-size:1.7em;line-height:1.25;margin:0 0 .6em;font-weight:700}.ccc-mobile-wrapper h3{font-size:1.3em;line-height:1.3;margin:1.8em 0 .5em;font-weight:700}.ccc-mobile-wrapper h4{font-size:1.05em;margin:1.1em 0 .2em}.ccc-mobile-wrapper p{margin:0 0 1em}.ccc-mobile-wrapper a{color:#0b6b5f;text-decoration:underline}.ccc-compare-table{width:100%;border-collapse:collapse;margin:1em 0;font-size:.97em}.ccc-compare-table th,.ccc-compare-table td{text-align:left;padding:10px 12px;border-bottom:1px solid #e3e3e6;vertical-align:top}.ccc-compare-table th{width:42%;font-weight:600;color:#3a3a3c}.ccc-roastery-tip{background:#eff6f4;border-left:4px solid #0b6b5f;border-radius:10px;padding:16px 18px;margin:1.6em 0}.ccc-return-note{background:#fdf3ef;border-left:4px solid #b4532a;border-radius:10px;padding:16px 18px;margin:1.6em 0}.ccc-faq h4{font-weight:700;margin:1.2em 0 .2em}@media(max-width:600px){.ccc-mobile-wrapper{font-size:16px}.ccc-mobile-wrapper h2{font-size:1.45em}.ccc-mobile-wrapper h3{font-size:1.18em}}\u003c\/style\u003e\n\u003ch2\u003eThe ring that keeps the ram centred\u003c\/h2\u003e\n\u003cp\u003eThe guide ring sits in the portafilter holder and guides the tamper ram along its path. It makes sure the ram enters the basket at the same point on every cycle – 61 millimetres in diameter, 2.5 millimetres thick, and that is exactly what decides whether the puck comes out level or stays higher on one side.\u003c\/p\u003e\n\u003cp\u003eThe ring is a wear part in a spot that takes hundreds of loads every day. It wears in, picks up scoring, and the play that develops goes straight into the tamp. This version belongs to the M3, M4, M5 and M6 models.\u003c\/p\u003e\n\u003ch3\u003eWhen it is due\u003c\/h3\u003e\n\u003cp\u003eIt is due when the puck is higher on one side, when the ram has noticeable play in the ring, when the ring shows scoring, notches or cracks, or when it has become deformed. Replacing it often brings back a more even tamp without changing anything else.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003ctable class=\"ccc-compare-table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eGuide ring, 61 × 2.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLocation\u003c\/th\u003e\n\u003ctd\u003ePortafilter holder of the tamper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003ePuqPress M3, M4, M5 and M6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eScope of delivery\u003c\/th\u003e\n\u003ctd\u003eOne guide ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003e1-210-0269-2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVersion\u003c\/th\u003e\n\u003ctd\u003eOur documentation gives no information on the material\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eInstallation by a specialist recommended\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003ePuqPress\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eImportant for installation\u003c\/h3\u003e\n\u003cp\u003eThe ring sits in the moving holder of the tamper. Disconnect the unit from the mains before working on it. After the replacement, do a test run with an empty portafilter before working with coffee again. We deliberately do not give step-by-step instructions here.\u003c\/p\u003e\n\u003ch3\u003eWho it is for\u003c\/h3\u003e\n\u003cp\u003eFor high-volume bars where the tamp has gradually become uneven – and for service businesses that keep the ring in stock as a predictable wear part.\u003c\/p\u003e\n\u003ch3\u003eWhat goes with it\u003c\/h3\u003e\n\u003cp\u003eFor the Q series we carry the \u003ca href=\"\/en\/products\/puqpress-fuehrungsring-61x2-5-q1-gen5-q2\"\u003eguide ring for Q1 Gen 5 and Q2\u003c\/a\u003e. On the same holder you will find the \u003ca href=\"\/en\/products\/puqpress-unterer-klemmring-m3-m4-m5-m6-matt-chrom\"\u003elower clamping ring for M3 to M6\u003c\/a\u003e and the \u003ca href=\"\/en\/products\/puqpress-schlitten-siebtraegerauflage-m5\"\u003eportafilter rest slide\u003c\/a\u003e. The whole category is under \u003ca href=\"\/en\/collections\/ersatzteile-macap-puqpress\"\u003eMacap and PuqPress spare parts\u003c\/a\u003e.\u003c\/p\u003e\n\u003cdiv class=\"ccc-roastery-tip\"\u003e\n\u003cp\u003e\u003cstrong\u003eFrom our workshop in Bern and Zurich\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhen someone shows us an uneven tamp, we look at this ring first and only then at the settings. In nine out of ten cases it is down to the worn ring and not the recipe – that is our routine, not a manufacturer specification. We check with whatever is in the grinder at the time, usually \u003ca href=\"\/en\/products\/nutty-delight-kaffee-blend-brasilien-indien\"\u003eNutty Delight\u003c\/a\u003e, otherwise \u003ca href=\"\/en\/products\/cozy-chocolate-natural-brasilien-kaffeebohnen\"\u003eCozy Chocolate\u003c\/a\u003e or \u003ca href=\"\/en\/products\/very-nutty-kraftiger-robusta-aus-indien\"\u003eVery Nutty\u003c\/a\u003e. The full range is under \u003ca href=\"\/en\/collections\/kaffeebohnen\"\u003eCoffee beans\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ccc-return-note\"\u003e\n\u003cp\u003e\u003cstrong\u003eNo returns\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOriginal spare parts are excluded from exchange and return. They are sourced to order and cannot be resold once they have been installed or test-fitted on a machine. So before ordering, check the model, year of manufacture and serial number of your machine – or drop us a line and we will clarify the fit together. Your rights in the case of defective goods remain unaffected.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ccc-faq\"\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003e\u003cstrong\u003eHow does it differ from the ring for Q1 and Q2?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eBoth are specified as 61 × 2.5 mm, but the part numbers are different and our documentation assigns them to different product series. So order by machine, not by size.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eHow often does the ring need replacing?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eOur documentation does not specify an interval. In practice, throughput decides.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eDoes it fit any 58 mm portafilter?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eThe ring belongs to the unit, not the portafilter. What matters is the tamper model – if in doubt, write and tell us which one you have.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eAre fixings included?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eThe ring is supplied on its own.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eCan I pick up the part in your shop?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eYes. We are in Bern at Gerberngasse 44 and in Zurich at Hagenholzstrasse 50b. Drop us a line telling us which part you need and we will have it ready.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003eQuestions about fit? Write to us at \u003ca href=\"mailto:office@coffeecoachingclub.ch\"\u003eoffice@coffeecoachingclub.ch\u003c\/a\u003e. We deliver across Switzerland and to Liechtenstein in 2-4 working days.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"How does it differ from the ring for Q1 and Q2?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Both are specified as 61 x 2.5 mm, but the part numbers are different and the documentation assigns them to different product series. Order by machine, not by size.\"}},{\"@type\":\"Question\",\"name\":\"How often does the ring need replacing?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Our documentation does not specify an interval. In practice, throughput decides.\"}},{\"@type\":\"Question\",\"name\":\"Does it fit any 58 mm portafilter?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The ring belongs to the unit, not the portafilter. What matters is the tamper model.\"}},{\"@type\":\"Question\",\"name\":\"Are fixings included?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The ring is supplied on its own.\"}},{\"@type\":\"Question\",\"name\":\"Can I pick up the part in your shop?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. We are in Bern at Gerberngasse 44 and in Zurich at Hagenholzstrasse 50b. Drop us a line telling us which part you need.\"}}]}\u003c\/script\u003e\n\u003c\/div\u003e","brand":"PuqPress","offers":[{"title":"Default Title","offer_id":56309416100225,"sku":"A04489","price":16.06,"currency_code":"CHF","in_stock":true}]},{"product_id":"puqpress-fuehrungsring-61x2-5-q1-gen5-q2","title":"PuqPress guide ring 61 × 2.5 mm for Q1 Gen 5 and Q2 – 1-210-0047-1","description":"\u003cdiv class=\"ccc-mobile-wrapper\"\u003e\n\u003cstyle\u003e.ccc-mobile-wrapper{max-width:880px;margin:0 auto;font-family:-apple-system,BlinkMacSystemFont,'Segoe UI',Roboto,Helvetica,Arial,sans-serif;color:#1d1d1f;line-height:1.65;font-size:17px}.ccc-mobile-wrapper h2{font-size:1.7em;line-height:1.25;margin:0 0 .6em;font-weight:700}.ccc-mobile-wrapper h3{font-size:1.3em;line-height:1.3;margin:1.8em 0 .5em;font-weight:700}.ccc-mobile-wrapper h4{font-size:1.05em;margin:1.1em 0 .2em}.ccc-mobile-wrapper p{margin:0 0 1em}.ccc-mobile-wrapper a{color:#0b6b5f;text-decoration:underline}.ccc-compare-table{width:100%;border-collapse:collapse;margin:1em 0;font-size:.97em}.ccc-compare-table th,.ccc-compare-table td{text-align:left;padding:10px 12px;border-bottom:1px solid #e3e3e6;vertical-align:top}.ccc-compare-table th{width:42%;font-weight:600;color:#3a3a3c}.ccc-roastery-tip{background:#eff6f4;border-left:4px solid #0b6b5f;border-radius:10px;padding:16px 18px;margin:1.6em 0}.ccc-return-note{background:#fdf3ef;border-left:4px solid #b4532a;border-radius:10px;padding:16px 18px;margin:1.6em 0}.ccc-faq h4{font-weight:700;margin:1.2em 0 .2em}@media(max-width:600px){.ccc-mobile-wrapper{font-size:16px}.ccc-mobile-wrapper h2{font-size:1.45em}.ccc-mobile-wrapper h3{font-size:1.18em}}\u003c\/style\u003e\n\u003ch2\u003eThe ring that keeps the ram centred\u003c\/h2\u003e\n\u003cp\u003eThe guide ring sits in the portafilter mount and gives the tamper ram its path. 61 millimetres in diameter, 2.5 millimetres thick: it determines whether the ram moves centrally into the basket on every cycle or ends up a few tenths off over time.\u003c\/p\u003e\n\u003cp\u003eThis version belongs to the Q series, specifically the fifth-generation Q1 and the Q2. It is a wear part: the ring wears in, develops scoring, and the resulting play shows up as a lopsided tamp long before anyone opens the unit.\u003c\/p\u003e\n\u003ch3\u003eWhen it's due\u003c\/h3\u003e\n\u003cp\u003eIt is due when the puck sits higher on one side, when the ram has noticeable play in the ring, when the ring shows scoring, notches or cracks, or when it has become deformed.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003ctable class=\"ccc-compare-table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eGuide ring, 61 × 2.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitting location\u003c\/th\u003e\n\u003ctd\u003ePortafilter mount of the tamper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003ePuqPress Q1 generation 5 and PuqPress Q2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eScope of delivery\u003c\/th\u003e\n\u003ctd\u003eOne guide ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003e1-210-0047-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVersion\u003c\/th\u003e\n\u003ctd\u003eOur documentation gives no information on the material\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eFitting by a specialist recommended\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003ePuqPress\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eImportant for installation\u003c\/h3\u003e\n\u003cp\u003eThe ring sits in the moving mount of the tamper. Before starting work, disconnect the unit from the mains, and after the replacement, do a test run with an empty portafilter before working with coffee again. We deliberately do not give step-by-step instructions here.\u003c\/p\u003e\n\u003ch3\u003eWho it's for\u003c\/h3\u003e\n\u003cp\u003eFor businesses running a Q1 or Q2 in continuous use and for service companies that carry the ring in their van instead of reordering it.\u003c\/p\u003e\n\u003ch3\u003eWhat goes with it\u003c\/h3\u003e\n\u003cp\u003eFor the M series we stock the \u003ca href=\"\/en\/products\/puqpress-fuehrungsring-61x2-5-m3-m4-m5-m6\"\u003eguide ring for M3 to M6\u003c\/a\u003e, plus the \u003ca href=\"\/en\/products\/puqpress-unterer-klemmring-m3-m4-m5-m6-matt-chrom\"\u003elower clamping ring\u003c\/a\u003e and the \u003ca href=\"\/en\/products\/puqpress-schlitten-siebtraegerauflage-m5\"\u003eportafilter rest slide\u003c\/a\u003e. The whole range is listed under \u003ca href=\"\/en\/collections\/ersatzteile-macap-puqpress\"\u003eMacap and PuqPress spare parts\u003c\/a\u003e and under \u003ca href=\"\/en\/collections\/puqpress\"\u003ePuqpress\u003c\/a\u003e.\u003c\/p\u003e\n\u003cdiv class=\"ccc-roastery-tip\"\u003e\n\u003cp\u003e\u003cstrong\u003eFrom our workshop in Bern and Zurich\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe lay the old and the new ring side by side on the workbench before fitting. The scoring is immediately visible in comparison, but almost never on the installed part – that is our routine, not a manufacturer requirement. We then check with whatever is in the grinder, usually \u003ca href=\"\/en\/products\/nutty-delight-kaffee-blend-brasilien-indien\"\u003eNutty Delight\u003c\/a\u003e, otherwise \u003ca href=\"\/en\/products\/cozy-chocolate-natural-brasilien-kaffeebohnen\"\u003eCozy Chocolate\u003c\/a\u003e or \u003ca href=\"\/en\/products\/very-nutty-kraftiger-robusta-aus-indien\"\u003eVery Nutty\u003c\/a\u003e. The full selection is under \u003ca href=\"\/en\/collections\/kaffeebohnen\"\u003eCoffee beans\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ccc-return-note\"\u003e\n\u003cp\u003e\u003cstrong\u003eNo returns\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSpare parts are excluded from exchange and return. They are sourced specifically for each order and cannot be resold after being installed or test-fitted on a machine. So before ordering, check the model, year of manufacture and serial number of your machine – or drop us a quick message and we'll check the fit together. Your rights in the case of defective goods remain unaffected.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ccc-faq\"\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003e\u003cstrong\u003eDoes it also fit an older Q1?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eOur documentation lists the Q1 generation 5 and the Q2. It says nothing about older generations – send us the serial number and we'll check.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eHow does it differ from the ring for M3 to M6?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eBoth are specified as 61 × 2.5 mm, but they have different part numbers and are assigned to different machine series. Order by machine, not by dimensions.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eHow can I tell that the ring and not the setting is to blame?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eIf the puck always sits higher on the same side regardless of dose and grind size, that points to the guide rather than the recipe.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eAre fixings included?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eThe ring is supplied on its own.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eCan I pick up the part from your shop?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eYes. We're in Bern at Gerberngasse 44 and in Zurich at Hagenholzstrasse 50b. Drop us a quick message saying which part you need and we'll have it ready.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003eQuestions about the fit? Write to us at \u003ca href=\"mailto:office@coffeecoachingclub.ch\"\u003eoffice@coffeecoachingclub.ch\u003c\/a\u003e. We deliver across Switzerland and to Liechtenstein in 2-4 working days.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"Does it also fit an older Q1?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Our documentation lists the Q1 generation 5 and the Q2. It says nothing about older generations.\"}},{\"@type\":\"Question\",\"name\":\"How does it differ from the ring for M3 to M6?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Both are specified as 61 x 2.5 mm, but they have different part numbers and are assigned to different machine series.\"}},{\"@type\":\"Question\",\"name\":\"How can I tell that the ring is to blame?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"If the puck always sits higher on the same side regardless of dose and grind size, that points to the guide.\"}},{\"@type\":\"Question\",\"name\":\"Are fixings included?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The ring is supplied on its own.\"}},{\"@type\":\"Question\",\"name\":\"Can I pick up the part from your shop?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. We're in Bern at Gerberngasse 44 and in Zurich at Hagenholzstrasse 50b. Drop us a quick message saying which part you need.\"}}]}\u003c\/script\u003e\n\u003c\/div\u003e","brand":"PuqPress","offers":[{"title":"Default Title","offer_id":56309416165761,"sku":"A03495","price":15.4,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0633\/2265\/2931\/files\/A03495_1.jpg?v=1790115572"},{"product_id":"puqpress-schmaler-fuss-fiorenzato-f64-f83","title":"PuqPress Narrow Foot for Fiorenzato F64 and F83 – 1-210-0443-2","description":"\u003cdiv class=\"ccc-mobile-wrapper\"\u003e\n\u003cstyle\u003e.ccc-mobile-wrapper{max-width:880px;margin:0 auto;font-family:-apple-system,BlinkMacSystemFont,'Segoe UI',Roboto,Helvetica,Arial,sans-serif;color:#1d1d1f;line-height:1.65;font-size:17px}.ccc-mobile-wrapper h2{font-size:1.7em;line-height:1.25;margin:0 0 .6em;font-weight:700}.ccc-mobile-wrapper h3{font-size:1.3em;line-height:1.3;margin:1.8em 0 .5em;font-weight:700}.ccc-mobile-wrapper h4{font-size:1.05em;margin:1.1em 0 .2em}.ccc-mobile-wrapper p{margin:0 0 1em}.ccc-mobile-wrapper a{color:#0b6b5f;text-decoration:underline}.ccc-compare-table{width:100%;border-collapse:collapse;margin:1em 0;font-size:.97em}.ccc-compare-table th,.ccc-compare-table td{text-align:left;padding:10px 12px;border-bottom:1px solid #e3e3e6;vertical-align:top}.ccc-compare-table th{width:42%;font-weight:600;color:#3a3a3c}.ccc-roastery-tip{background:#eff6f4;border-left:4px solid #0b6b5f;border-radius:10px;padding:16px 18px;margin:1.6em 0}.ccc-return-note{background:#fdf3ef;border-left:4px solid #b4532a;border-radius:10px;padding:16px 18px;margin:1.6em 0}.ccc-faq h4{font-weight:700;margin:1.2em 0 .2em}@media(max-width:600px){.ccc-mobile-wrapper{font-size:16px}.ccc-mobile-wrapper h2{font-size:1.45em}.ccc-mobile-wrapper h3{font-size:1.18em}}\u003c\/style\u003e\n\u003ch2\u003eBuilt narrow so everything fits side by side on the counter\u003c\/h2\u003e\n\u003cp\u003eBehind the bar, every centimetre counts. This foot is narrower than a standard foot and frees up space where the grinder and the neighbouring machine stand close together – our documentation lists it for the Fiorenzato F64 and F83 grinders.\u003c\/p\u003e\n\u003cp\u003eLike every machine foot, it is a wear part. It gets squashed when the machine is moved, soaked with cleaning agent when you clean, and at some point it no longer holds the machine steady. Then the grinder wanders while grinding – and on a tight counter that is doubly noticeable.\u003c\/p\u003e\n\u003ch3\u003eWhen it is due\u003c\/h3\u003e\n\u003cp\u003eIt is due when the grinder wanders or wobbles while grinding, when the foot is torn, flattened or broken, or when one is missing. It makes sense to replace feet as a set so the machine stands level.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003ctable class=\"ccc-compare-table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eFoot, narrow version\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation location\u003c\/th\u003e\n\u003ctd\u003eUnderside of the machine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003eFiorenzato F64 and F83. The number comes from the PuqPress range\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eScope of delivery\u003c\/th\u003e\n\u003ctd\u003eOne foot. For a set, order the corresponding quantity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003e1-210-0443-2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVersion\u003c\/th\u003e\n\u003ctd\u003eOur documentation gives no details on dimensions, thread or material\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003ePuqPress\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eWho it is for\u003c\/h3\u003e\n\u003cp\u003eFor bars where the grinder and tamper stand close together – and for anyone who wants to replace a damaged foot without resorting to a makeshift solution.\u003c\/p\u003e\n\u003ch3\u003eWhat goes with it\u003c\/h3\u003e\n\u003cp\u003eParts for Fiorenzato grinders are listed under \u003ca href=\"\/en\/collections\/ersatzteile-fiorenzato\"\u003eFiorenzato grinder spare parts\u003c\/a\u003e. You can find more PuqPress parts under \u003ca href=\"\/en\/collections\/ersatzteile-macap-puqpress\"\u003eMacap and PuqPress spare parts\u003c\/a\u003e and under \u003ca href=\"\/en\/collections\/puqpress\"\u003ePuqpress\u003c\/a\u003e, and everything else under \u003ca href=\"\/en\/collections\/zubehor-und-ersatzteile-kaffeemuhlen\"\u003eCoffee grinder accessories and spare parts\u003c\/a\u003e.\u003c\/p\u003e\n\u003cdiv class=\"ccc-roastery-tip\"\u003e\n\u003cp\u003e\u003cstrong\u003eFrom our workshop in Bern and Zurich\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBefore ordering, we measure once how much space really remains between the grinder and the neighbouring machine. A narrow foot only solves a space problem if the feet are the cause and not the housing – that is our routine, not a manufacturer requirement. Afterwards there is a \u003ca href=\"\/en\/products\/nutty-delight-kaffee-blend-brasilien-indien\"\u003eNutty Delight\u003c\/a\u003e, sometimes the \u003ca href=\"\/en\/products\/cozy-chocolate-natural-brasilien-kaffeebohnen\"\u003eCozy Chocolate\u003c\/a\u003e or the \u003ca href=\"\/en\/products\/very-nutty-kraftiger-robusta-aus-indien\"\u003eVery Nutty\u003c\/a\u003e. The full range is listed under \u003ca href=\"\/en\/collections\/kaffeebohnen\"\u003eCoffee beans\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ccc-return-note\"\u003e\n\u003cp\u003e\u003cstrong\u003eReturns excluded\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOriginal spare parts are excluded from exchange and return. They are sourced specifically for each order and cannot be resold after installation or a test fitting on the machine. So before ordering, check the model, year of manufacture and serial number of your machine – or drop us a quick message and we will clarify the fit together. Your rights in the event of defective goods remain unaffected.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ccc-faq\"\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003e\u003cstrong\u003eDo I get one foot or a set?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eThe price is for one foot. If you want to replace all of them, order the corresponding quantity.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eWhy does a foot for a Fiorenzato have a PuqPress number?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eThat is how our documentation lists it. It does not explain why the number comes from the PuqPress range – and we are not reading anything into it here.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eHow narrow is narrow?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eOur documentation does not give a dimension. If millimetres matter for you, ask us briefly before ordering.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eDoes it also fit other Fiorenzato models?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eThe F64 and F83 are listed. Our documentation says nothing about other models – if in doubt, send us a photo of the underside of the machine.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eCan I pick up the part from your shop?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eYes. We are in Bern at Gerberngasse 44 and in Zurich at Hagenholzstrasse 50b. Drop us a quick message saying which part you need, and we will have it ready for you.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003eQuestions about the fit? Write to us at \u003ca href=\"mailto:office@coffeecoachingclub.ch\"\u003eoffice@coffeecoachingclub.ch\u003c\/a\u003e. We deliver across Switzerland and to Liechtenstein in 2-4 working days.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"Do I get one foot or a set?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The price is for one foot. If you want to replace all of them, order the corresponding quantity.\"}},{\"@type\":\"Question\",\"name\":\"Why does a foot for a Fiorenzato have a PuqPress number?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"That is how our documentation lists it. It does not explain why the number comes from the PuqPress range.\"}},{\"@type\":\"Question\",\"name\":\"How narrow is narrow?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Our documentation does not give a dimension. Ask us briefly before ordering if millimetres matter.\"}},{\"@type\":\"Question\",\"name\":\"Does it also fit other Fiorenzato models?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The F64 and F83 are listed. Our documentation says nothing about other models.\"}},{\"@type\":\"Question\",\"name\":\"Can I pick up the part from your shop?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. We are in Bern at Gerberngasse 44 and in Zurich at Hagenholzstrasse 50b. Drop us a quick message saying which part you need.\"}}]}\u003c\/script\u003e\n\u003c\/div\u003e","brand":"PuqPress","offers":[{"title":"Default Title","offer_id":56309417738625,"sku":"A04614","price":9.13,"currency_code":"CHF","in_stock":true}]},{"product_id":"puqpress-stirnrad-t12-messing","title":"PuqPress spur gear T12 in brass – 1-210-0057-1","description":"\u003cdiv class=\"ccc-mobile-wrapper\"\u003e\n\u003cstyle\u003e.ccc-mobile-wrapper{max-width:880px;margin:0 auto;font-family:-apple-system,BlinkMacSystemFont,'Segoe UI',Roboto,Helvetica,Arial,sans-serif;color:#1d1d1f;line-height:1.65;font-size:17px}.ccc-mobile-wrapper h2{font-size:1.7em;line-height:1.25;margin:0 0 .6em;font-weight:700}.ccc-mobile-wrapper h3{font-size:1.3em;line-height:1.3;margin:1.8em 0 .5em;font-weight:700}.ccc-mobile-wrapper h4{font-size:1.05em;margin:1.1em 0 .2em}.ccc-mobile-wrapper p{margin:0 0 1em}.ccc-mobile-wrapper a{color:#0b6b5f;text-decoration:underline}.ccc-compare-table{width:100%;border-collapse:collapse;margin:1em 0;font-size:.97em}.ccc-compare-table th,.ccc-compare-table td{text-align:left;padding:10px 12px;border-bottom:1px solid #e3e3e6;vertical-align:top}.ccc-compare-table th{width:42%;font-weight:600;color:#3a3a3c}.ccc-roastery-tip{background:#eff6f4;border-left:4px solid #0b6b5f;border-radius:10px;padding:16px 18px;margin:1.6em 0}.ccc-return-note{background:#fdf3ef;border-left:4px solid #b4532a;border-radius:10px;padding:16px 18px;margin:1.6em 0}.ccc-faq h4{font-weight:700;margin:1.2em 0 .2em}@media(max-width:600px){.ccc-mobile-wrapper{font-size:16px}.ccc-mobile-wrapper h2{font-size:1.45em}.ccc-mobile-wrapper h3{font-size:1.18em}}\u003c\/style\u003e\n\u003ch2\u003eTwelve teeth that set the ram in motion\u003c\/h2\u003e\n\u003cp\u003eIn the drive of an automatic tamper, the rotation of the motor is transmitted through gears before it reaches the ram as a linear force. This spur gear has twelve teeth and is made of brass – a material that runs more quietly than steel and, if something goes wrong, tends to give way itself rather than take the mating gear with it.\u003c\/p\u003e\n\u003cp\u003eThat is exactly why it is a part that will need replacing at some point. The teeth wear round, the drive gets louder, and if a tooth breaks off, the tamper stops mid-cycle. If you are planning to open the unit anyway, replace the gear at the same time.\u003c\/p\u003e\n\u003ch3\u003eWhen it is due\u003c\/h3\u003e\n\u003cp\u003eIt is due when the drive has become louder or makes grinding noises, when the ram jerks or does not travel smoothly, when teeth are rounded, broken or worn in, or when brass debris collects inside the housing.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003ctable class=\"ccc-compare-table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eSpur gear with 12 teeth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation location\u003c\/th\u003e\n\u003ctd\u003eDrive inside the unit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003ePuqPress. Our documentation does not name a single model for this item – write to us with the unit you have and we will check the fit.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eScope of delivery\u003c\/th\u003e\n\u003ctd\u003eOne gear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003e1-210-0057-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVersion\u003c\/th\u003e\n\u003ctd\u003eBrass. Our documentation gives no details on module, bore or width\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eInstallation by a specialist recommended\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003ePuqPress\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eImportant for installation\u003c\/h3\u003e\n\u003cp\u003eThe gear sits in the drive, i.e. inside the unit and close to live parts. The unit is disconnected from the mains before opening. The tooth engagement and the backlash to the mating gear determine the service life of both gears – this needs to be checked before the housing is closed again. We deliberately do not give step-by-step instructions here.\u003c\/p\u003e\n\u003ch3\u003eWho it is for\u003c\/h3\u003e\n\u003cp\u003eFor service businesses that repair a noisy or jerking tamper instead of replacing it.\u003c\/p\u003e\n\u003ch3\u003eWhat goes with it\u003c\/h3\u003e\n\u003cp\u003eOther parts from the portafilter holder are the \u003ca href=\"\/en\/products\/puqpress-unterer-klemmring-m3-m4-m5-m6-matt-chrom\"\u003elower clamping ring for M3 to M6\u003c\/a\u003e and the guide rings for \u003ca href=\"\/en\/products\/puqpress-fuehrungsring-61x2-5-m3-m4-m5-m6\"\u003eM3 to M6\u003c\/a\u003e and \u003ca href=\"\/en\/products\/puqpress-fuehrungsring-61x2-5-q1-gen5-q2\"\u003eQ1 Gen 5 and Q2\u003c\/a\u003e. The whole category is under \u003ca href=\"\/en\/collections\/ersatzteile-macap-puqpress\"\u003eMacap and PuqPress spare parts\u003c\/a\u003e.\u003c\/p\u003e\n\u003cdiv class=\"ccc-roastery-tip\"\u003e\n\u003cp\u003e\u003cstrong\u003eFrom our workshop in Bern and Zurich\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhen a brass gear is worn, we always look at the mating gear too. A new gear that meshes with worn-in teeth will be worn out again after a short time – that is our routine, not a manufacturer requirement. After the test run there is a \u003ca href=\"\/en\/products\/nutty-delight-kaffee-blend-brasilien-indien\"\u003eNutty Delight\u003c\/a\u003e, sometimes the \u003ca href=\"\/en\/products\/cozy-chocolate-natural-brasilien-kaffeebohnen\"\u003eCozy Chocolate\u003c\/a\u003e or the \u003ca href=\"\/en\/products\/very-nutty-kraftiger-robusta-aus-indien\"\u003eVery Nutty\u003c\/a\u003e. The full selection is under \u003ca href=\"\/en\/collections\/kaffeebohnen\"\u003eCoffee beans\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ccc-return-note\"\u003e\n\u003cp\u003e\u003cstrong\u003eNo returns\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOriginal spare parts are excluded from exchange and return. They are sourced to order and cannot be resold after being installed or test-fitted on a machine. So before ordering, check the model, year of manufacture and serial number of your machine – or drop us a line and we will clarify the fit together. Your rights in the event of defective goods remain unaffected.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ccc-faq\"\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003e\u003cstrong\u003eWhich PuqPress models does the gear fit?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eOur documentation lists the number 1-210-0057-1 without assigning it to a model. Write to us with the unit you have, ideally including the serial number, and we will check it.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eWhy brass and not steel?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eThat is how the part is made. Our documentation does not give a reason – in drive engineering, brass is common as the quieter-running partner in a gear pair.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eIs the mating gear included?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eNo, one gear is supplied.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eCan I replace the gear myself?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eIt sits in the drive close to live parts. We recommend installation by a specialist and, in any case, disconnecting the unit from the mains.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eCan I pick up the part from you in the shop?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eYes. We are in Bern at Gerberngasse 44 and in Zurich at Hagenholzstrasse 50b. Drop us a line with the part you need and we will have it ready for you.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003eQuestions about the fit? Write to us at \u003ca href=\"mailto:office@coffeecoachingclub.ch\"\u003eoffice@coffeecoachingclub.ch\u003c\/a\u003e. We deliver across Switzerland and to Liechtenstein in 2-4 working days.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"Which PuqPress models does the gear fit?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Our documentation lists the number 1-210-0057-1 without assigning it to a model. Write to us with the unit you have, ideally with the serial number.\"}},{\"@type\":\"Question\",\"name\":\"Why brass and not steel?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"That is how the part is made. Our documentation does not give a reason.\"}},{\"@type\":\"Question\",\"name\":\"Is the mating gear included?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"No, one gear is supplied.\"}},{\"@type\":\"Question\",\"name\":\"Can I replace the gear myself?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"It sits in the drive close to live parts. We recommend installation by a specialist and disconnecting the unit from the mains.\"}},{\"@type\":\"Question\",\"name\":\"Can I pick up the part in the shop?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. We are in Bern at Gerberngasse 44 and in Zurich at Hagenholzstrasse 50b. Drop us a line with the part you need.\"}}]}\u003c\/script\u003e\n\u003c\/div\u003e","brand":"PuqPress","offers":[{"title":"Default Title","offer_id":56309417771393,"sku":"A04510","price":42.79,"currency_code":"CHF","in_stock":true}]},{"product_id":"puqpress-tamperteller-58-3mm-antihaft-m3-m6","title":"PuqPress tamper plate 58.3 mm with non-stick coating for M3 to M6 – 1-210-0105-5","description":"\u003cdiv class=\"ccc-mobile-wrapper\"\u003e\n\u003cstyle\u003e.ccc-mobile-wrapper{max-width:880px;margin:0 auto;font-family:-apple-system,BlinkMacSystemFont,'Segoe UI',Roboto,Helvetica,Arial,sans-serif;color:#1d1d1f;line-height:1.65;font-size:17px}.ccc-mobile-wrapper h2{font-size:1.7em;line-height:1.25;margin:0 0 .6em;font-weight:700}.ccc-mobile-wrapper h3{font-size:1.3em;line-height:1.3;margin:1.8em 0 .5em;font-weight:700}.ccc-mobile-wrapper h4{font-size:1.05em;margin:1.1em 0 .2em}.ccc-mobile-wrapper p{margin:0 0 1em}.ccc-mobile-wrapper a{color:#0b6b5f;text-decoration:underline}.ccc-compare-table{width:100%;border-collapse:collapse;margin:1em 0;font-size:.97em}.ccc-compare-table th,.ccc-compare-table td{text-align:left;padding:10px 12px;border-bottom:1px solid #e3e3e6;vertical-align:top}.ccc-compare-table th{width:42%;font-weight:600;color:#3a3a3c}.ccc-roastery-tip{background:#eff6f4;border-left:4px solid #0b6b5f;border-radius:10px;padding:16px 18px;margin:1.6em 0}.ccc-return-note{background:#fdf3ef;border-left:4px solid #b4532a;border-radius:10px;padding:16px 18px;margin:1.6em 0}.ccc-faq h4{font-weight:700;margin:1.2em 0 .2em}@media(max-width:600px){.ccc-mobile-wrapper{font-size:16px}.ccc-mobile-wrapper h2{font-size:1.45em}.ccc-mobile-wrapper h3{font-size:1.18em}}\u003c\/style\u003e\n\u003ch2\u003eThe surface that makes the puck\u003c\/h2\u003e\n\u003cp\u003eThe tamper plate is the part of the automatic tamper that actually meets the coffee. Its diameter determines how much of an edge is left, and its surface determines whether the puck releases cleanly from the plate. This version measures 58.3 millimetres and has a non-stick coating.\u003c\/p\u003e\n\u003cp\u003eWear shows first on the coating. It turns dull, then damp coffee starts to stick, and eventually the surface of the puck tears when the plate moves back up. By then at the latest the plate is due – no recipe can save a torn puck.\u003c\/p\u003e\n\u003ch3\u003eWhen it is due\u003c\/h3\u003e\n\u003cp\u003eIt is due when coffee sticks to the plate, when the puck surface tears as the plate moves up, when the coating is scratched, worn bare or peeling, or when the edge has taken knocks.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003ctable class=\"ccc-compare-table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eTamper plate, 58.3 mm, with non-stick coating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLocation\u003c\/th\u003e\n\u003ctd\u003eTamper ram\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003ePuqPress M3, M4, M5 and M6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eScope of delivery\u003c\/th\u003e\n\u003ctd\u003eOne tamper plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003e1-210-0105-5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVersion\u003c\/th\u003e\n\u003ctd\u003eNon-stick coated. Our documentation gives no information on the base material or the shape of the underside\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eFitting by a specialist recommended\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003ePuqPress\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eImportant for installation\u003c\/h3\u003e\n\u003cp\u003eThe plate sits on the moving ram. Disconnect the device from the mains before working on it. After the replacement, do a test run with an empty portafilter to make sure the plate moves freely and enters centred. We deliberately do not give step-by-step instructions here.\u003c\/p\u003e\n\u003ch3\u003eWho it is for\u003c\/h3\u003e\n\u003cp\u003eFor bars that work with 58.3 mm – and for anyone who replaces a worn plate instead of compensating for a poor puck with grind size and dose.\u003c\/p\u003e\n\u003ch3\u003eWhat goes with it\u003c\/h3\u003e\n\u003cp\u003eWe carry the 58 millimetre version as the \u003ca href=\"\/en\/products\/puqpress-tamperteller-58mm-antihaft-m3-m6\"\u003etamper plate 58 mm\u003c\/a\u003e. The \u003ca href=\"\/en\/products\/puqpress-unterer-klemmring-m3-m4-m5-m6-matt-chrom\"\u003elower clamping ring\u003c\/a\u003e and the \u003ca href=\"\/en\/products\/puqpress-fuehrungsring-61x2-5-m3-m4-m5-m6\"\u003eguide ring for M3 to M6\u003c\/a\u003e sit on the same mount. The whole range is under \u003ca href=\"\/en\/collections\/ersatzteile-macap-puqpress\"\u003eMacap and PuqPress spare parts\u003c\/a\u003e and under \u003ca href=\"\/en\/collections\/puqpress\"\u003ePuqpress\u003c\/a\u003e.\u003c\/p\u003e\n\u003cdiv class=\"ccc-roastery-tip\"\u003e\n\u003cp\u003e\u003cstrong\u003eFrom our workshop in Bern and Zurich\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAt the end of the day we wipe the plate dry and keep scouring pads and descaler away from it. What kills a non-stick coating is almost always the cleaning, not the coffee – that is our routine, not a manufacturer's specification. We then check with whatever is in the grinder, usually \u003ca href=\"\/en\/products\/nutty-delight-kaffee-blend-brasilien-indien\"\u003eNutty Delight\u003c\/a\u003e, otherwise \u003ca href=\"\/en\/products\/cozy-chocolate-natural-brasilien-kaffeebohnen\"\u003eCozy Chocolate\u003c\/a\u003e or \u003ca href=\"\/en\/products\/very-nutty-kraftiger-robusta-aus-indien\"\u003eVery Nutty\u003c\/a\u003e. The full selection is under \u003ca href=\"\/en\/collections\/kaffeebohnen\"\u003eCoffee beans\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ccc-return-note\"\u003e\n\u003cp\u003e\u003cstrong\u003eNo returns\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOriginal spare parts are excluded from exchange and return. They are sourced to order and cannot be resold once they have been installed or test-fitted on a machine. So before ordering, check the model, year of manufacture and serial number of your machine – or drop us a line and we will clarify the fit together. Your rights in the case of defective goods remain unaffected.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ccc-faq\"\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003e\u003cstrong\u003e58 or 58.3 millimetres – which do I take?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eThat depends on the basket you work with. We carry both sizes; if you are unsure, let us know which basket you are using.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eIs the coating food-safe?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eThe plate is designed as a tamper plate for exactly this purpose. Our documentation gives no further information on the coating, and we do not claim anything beyond that here.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eDoes it fit all four models?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eOur documentation lists it for M3, M4, M5 and M6. It says nothing about older series.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eAre fixings included?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eThe plate is supplied. Whether screws on your device should be replaced as well will become clear on removal.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eCan I pick up the part at your shop?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eYes. We are in Bern at Gerberngasse 44 and in Zurich at Hagenholzstrasse 50b. Drop us a line with the part you need, and we will have it ready for you.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003eQuestions about the fit? Write to us at \u003ca href=\"mailto:office@coffeecoachingclub.ch\"\u003eoffice@coffeecoachingclub.ch\u003c\/a\u003e. We deliver across Switzerland and to Liechtenstein in 2-4 working days.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"58 or 58.3 millimetres, which do I take?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"That depends on the basket you work with. We carry both sizes. Let us know which basket you are using.\"}},{\"@type\":\"Question\",\"name\":\"Is the coating food-safe?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The plate is designed as a tamper plate for this purpose. Our documentation gives no further information on the coating.\"}},{\"@type\":\"Question\",\"name\":\"Does it fit all four models?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Our documentation lists it for M3, M4, M5 and M6. It says nothing about older series.\"}},{\"@type\":\"Question\",\"name\":\"Are fixings included?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The plate is supplied. Whether screws should be replaced as well will become clear on removal.\"}},{\"@type\":\"Question\",\"name\":\"Can I pick up the part at the shop?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. We are in Bern at Gerberngasse 44 and in Zurich at Hagenholzstrasse 50b. Drop us a line with the part you need.\"}}]}\u003c\/script\u003e\n\u003c\/div\u003e","brand":"PuqPress","offers":[{"title":"Default Title","offer_id":56309420851585,"sku":"A04558","price":162.91,"currency_code":"CHF","in_stock":true}]},{"product_id":"puqpress-tamperteller-58mm-antihaft-m3-m6","title":"PuqPress tamper plate 58 mm with non-stick coating for M3 to M6 – 1-210-0256-2","description":"\u003cdiv class=\"ccc-mobile-wrapper\"\u003e\n\u003cstyle\u003e.ccc-mobile-wrapper{max-width:880px;margin:0 auto;font-family:-apple-system,BlinkMacSystemFont,'Segoe UI',Roboto,Helvetica,Arial,sans-serif;color:#1d1d1f;line-height:1.65;font-size:17px}.ccc-mobile-wrapper h2{font-size:1.7em;line-height:1.25;margin:0 0 .6em;font-weight:700}.ccc-mobile-wrapper h3{font-size:1.3em;line-height:1.3;margin:1.8em 0 .5em;font-weight:700}.ccc-mobile-wrapper h4{font-size:1.05em;margin:1.1em 0 .2em}.ccc-mobile-wrapper p{margin:0 0 1em}.ccc-mobile-wrapper a{color:#0b6b5f;text-decoration:underline}.ccc-compare-table{width:100%;border-collapse:collapse;margin:1em 0;font-size:.97em}.ccc-compare-table th,.ccc-compare-table td{text-align:left;padding:10px 12px;border-bottom:1px solid #e3e3e6;vertical-align:top}.ccc-compare-table th{width:42%;font-weight:600;color:#3a3a3c}.ccc-roastery-tip{background:#eff6f4;border-left:4px solid #0b6b5f;border-radius:10px;padding:16px 18px;margin:1.6em 0}.ccc-return-note{background:#fdf3ef;border-left:4px solid #b4532a;border-radius:10px;padding:16px 18px;margin:1.6em 0}.ccc-faq h4{font-weight:700;margin:1.2em 0 .2em}@media(max-width:600px){.ccc-mobile-wrapper{font-size:16px}.ccc-mobile-wrapper h2{font-size:1.45em}.ccc-mobile-wrapper h3{font-size:1.18em}}\u003c\/style\u003e\n\u003ch2\u003eThe surface that shapes the puck\u003c\/h2\u003e\n\u003cp\u003eThe tamper plate is the part of the automatic tamper that meets the coffee. Its diameter determines how much of an edge is left in the basket, its surface whether the puck releases cleanly again. This version measures 58 millimetres and has a non-stick coating.\u003c\/p\u003e\n\u003cp\u003eWear starts with the coating. It turns dull, then some coffee sticks when it is moist, and at some point the puck surface tears when the plate moves back up. If that sounds familiar, the part has usually been in use longer than was good for it.\u003c\/p\u003e\n\u003ch3\u003eWhen it is due\u003c\/h3\u003e\n\u003cp\u003eIt is due when coffee sticks to the plate, when the puck surface tears as the plate moves up, when the coating is scratched, worn bare or peeling, or when the edge has taken knocks.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003ctable class=\"ccc-compare-table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eTamper plate, 58 mm, with non-stick coating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation location\u003c\/th\u003e\n\u003ctd\u003eRam of the tamper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003ePuqPress M3, M4, M5 and M6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eScope of delivery\u003c\/th\u003e\n\u003ctd\u003eOne tamper plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003e1-210-0256-2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVersion\u003c\/th\u003e\n\u003ctd\u003eNon-stick coated. Our documentation gives no details on the base material or the shape of the underside\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eFitting by a specialist recommended\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003ePuqPress\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eImportant for installation\u003c\/h3\u003e\n\u003cp\u003eThe plate sits on the moving ram. Before any work, the unit is disconnected from the mains, and after the replacement a test run with an empty portafilter is part of the job, to make sure the plate runs freely and enters centrally. We deliberately do not provide step-by-step instructions here.\u003c\/p\u003e\n\u003ch3\u003eWho it is for\u003c\/h3\u003e\n\u003cp\u003eFor bars that work with 58 mm – and for service companies that stock the plate as a wear part rather than treating it as a reason for complaints.\u003c\/p\u003e\n\u003ch3\u003eWhat goes with it\u003c\/h3\u003e\n\u003cp\u003eWe stock the 58.3 millimetre version as the \u003ca href=\"\/en\/products\/puqpress-tamperteller-58-3mm-antihaft-m3-m6\"\u003etamper plate 58.3 mm\u003c\/a\u003e. The \u003ca href=\"\/en\/products\/puqpress-unterer-klemmring-m3-m4-m5-m6-matt-chrom\"\u003elower clamping ring\u003c\/a\u003e and the \u003ca href=\"\/en\/products\/puqpress-fuehrungsring-61x2-5-m3-m4-m5-m6\"\u003eguide ring for M3 to M6\u003c\/a\u003e sit on the same mount. The whole category is listed under \u003ca href=\"\/en\/collections\/ersatzteile-macap-puqpress\"\u003eMacap and PuqPress spare parts\u003c\/a\u003e and under \u003ca href=\"\/en\/collections\/puqpress\"\u003ePuqpress\u003c\/a\u003e.\u003c\/p\u003e\n\u003cdiv class=\"ccc-roastery-tip\"\u003e\n\u003cp\u003e\u003cstrong\u003eFrom our workshop in Bern and Zurich\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe wipe the plate dry at closing and keep scouring pads and descaler away from it. What kills a non-stick coating is almost always the cleaning, not the coffee – that is our routine, not a manufacturer requirement. We then check with whatever is in the grinder at the time, usually \u003ca href=\"\/en\/products\/nutty-delight-kaffee-blend-brasilien-indien\"\u003eNutty Delight\u003c\/a\u003e, otherwise \u003ca href=\"\/en\/products\/cozy-chocolate-natural-brasilien-kaffeebohnen\"\u003eCozy Chocolate\u003c\/a\u003e or \u003ca href=\"\/en\/products\/very-nutty-kraftiger-robusta-aus-indien\"\u003eVery Nutty\u003c\/a\u003e. The full selection is under \u003ca href=\"\/en\/collections\/kaffeebohnen\"\u003eCoffee beans\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ccc-return-note\"\u003e\n\u003cp\u003e\u003cstrong\u003eReturns excluded\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOriginal spare parts are excluded from exchange and return. They are sourced specifically for each order and cannot be resold once they have been fitted or test-fitted on a machine. So before ordering, check the model, year of manufacture and serial number of your machine – or drop us a quick line and we will clarify the fit together. Your rights in the event of defective goods remain unaffected.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ccc-faq\"\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003e\u003cstrong\u003e58 or 58.3 millimetres – which one do I take?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eThat depends on the basket you work with. We stock both sizes; if you are unsure, write and tell us which basket you use.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eCan you actually notice three tenths of a millimetre?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eAt the edge of the basket, yes – that is where it is decided whether water runs past the puck. We are happy to clarify in advance which size suits your basket.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eDoes it fit all four models?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eOur documentation lists it for M3, M4, M5 and M6. It says nothing about older series.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eAre fixings included?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eYou receive the plate. Whether screws should also be replaced on your unit becomes clear when you remove it.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eCan I pick up the part at your shop?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eYes. We are in Bern at Gerberngasse 44 and in Zurich at Hagenholzstrasse 50b. Drop us a quick line telling us which part you need and we will have it ready for you.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003eQuestions about fit? Write to us at \u003ca href=\"mailto:office@coffeecoachingclub.ch\"\u003eoffice@coffeecoachingclub.ch\u003c\/a\u003e. We deliver across Switzerland and to Liechtenstein in 2-4 working days.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"58 or 58.3 millimetres, which one do I take?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"That depends on the basket you work with. We stock both sizes. Write and tell us which basket you use.\"}},{\"@type\":\"Question\",\"name\":\"Can you actually notice three tenths of a millimetre?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"At the edge of the basket, yes, that is where it is decided whether water runs past the puck.\"}},{\"@type\":\"Question\",\"name\":\"Does it fit all four models?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Our documentation lists it for M3, M4, M5 and M6. It says nothing about older series.\"}},{\"@type\":\"Question\",\"name\":\"Are fixings included?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"You receive the plate. Whether screws should also be replaced becomes clear when you remove it.\"}},{\"@type\":\"Question\",\"name\":\"Can I pick up the part at the shop?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. We are in Bern at Gerberngasse 44 and in Zurich at Hagenholzstrasse 50b. Drop us a quick line telling us which part you need.\"}}]}\u003c\/script\u003e\n\u003c\/div\u003e","brand":"PuqPress","offers":[{"title":"Default Title","offer_id":56309420884353,"sku":"A04521","price":162.91,"currency_code":"CHF","in_stock":true}]},{"product_id":"puqpress-tamperteller-58-3mm-antihaft-1-210-0255-2","title":"PuqPress Tamper Plate 58.3 mm with Non-Stick Coating for M3 to M6 – 1-210-0255-2","description":"\u003cdiv class=\"ccc-mobile-wrapper\"\u003e\n\u003cstyle\u003e.ccc-mobile-wrapper{max-width:880px;margin:0 auto;font-family:-apple-system,BlinkMacSystemFont,'Segoe UI',Roboto,Helvetica,Arial,sans-serif;color:#1d1d1f;line-height:1.65;font-size:17px}.ccc-mobile-wrapper h2{font-size:1.7em;line-height:1.25;margin:0 0 .6em;font-weight:700}.ccc-mobile-wrapper h3{font-size:1.3em;line-height:1.3;margin:1.8em 0 .5em;font-weight:700}.ccc-mobile-wrapper h4{font-size:1.05em;margin:1.1em 0 .2em}.ccc-mobile-wrapper p{margin:0 0 1em}.ccc-mobile-wrapper a{color:#0b6b5f;text-decoration:underline}.ccc-compare-table{width:100%;border-collapse:collapse;margin:1em 0;font-size:.97em}.ccc-compare-table th,.ccc-compare-table td{text-align:left;padding:10px 12px;border-bottom:1px solid #e3e3e6;vertical-align:top}.ccc-compare-table th{width:42%;font-weight:600;color:#3a3a3c}.ccc-roastery-tip{background:#eff6f4;border-left:4px solid #0b6b5f;border-radius:10px;padding:16px 18px;margin:1.6em 0}.ccc-return-note{background:#fdf3ef;border-left:4px solid #b4532a;border-radius:10px;padding:16px 18px;margin:1.6em 0}.ccc-faq h4{font-weight:700;margin:1.2em 0 .2em}@media(max-width:600px){.ccc-mobile-wrapper{font-size:16px}.ccc-mobile-wrapper h2{font-size:1.45em}.ccc-mobile-wrapper h3{font-size:1.18em}}\u003c\/style\u003e\n\u003ch2\u003eThe surface that makes the puck – version 1-210-0255-2\u003c\/h2\u003e\n\u003cp\u003eThe tamper plate is the part of the automatic tamper that meets the coffee. Its diameter determines how much of a gap remains at the edge of the basket, and its surface determines whether the puck releases cleanly again. This version measures 58.3 millimetres, has a non-stick coating and carries part number 1-210-0255-2.\u003c\/p\u003e\n\u003cp\u003eFor the same size and the same description, our documentation lists a \u003cstrong\u003esecond number, 1-210-0105-5\u003c\/strong\u003e. It does not say how the two differ in construction – so we list both as separate items and put the number in the title instead of guessing. If you know the number of your old plate, order by that.\u003c\/p\u003e\n\u003ch3\u003eWhen it is due\u003c\/h3\u003e\n\u003cp\u003eIt is due when coffee sticks to the plate, when the puck surface tears as the tamper rises, when the coating is scratched, worn bare or peeling, or when the edge has taken knocks.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003ctable class=\"ccc-compare-table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eTamper plate, 58.3 mm, with non-stick coating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation position\u003c\/th\u003e\n\u003ctd\u003eTamper ram\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003ePuqPress M3, M4, M5 and M6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eScope of delivery\u003c\/th\u003e\n\u003ctd\u003eOne tamper plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003e1-210-0255-2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVersion\u003c\/th\u003e\n\u003ctd\u003eNon-stick coated. Our documentation gives no information on the base material or the shape of the underside\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eInstallation by a qualified technician recommended\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003ePuqPress\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eImportant for installation\u003c\/h3\u003e\n\u003cp\u003eThe plate sits on the moving ram. Disconnect the unit from the mains before working on it, and after the replacement do a test run with an empty portafilter to make sure the plate runs freely and enters the basket centrally. We deliberately do not give step-by-step instructions here.\u003c\/p\u003e\n\u003ch3\u003eWho it is for\u003c\/h3\u003e\n\u003cp\u003eFor bars that work with 58.3 mm and know the number of the plate fitted – and for service companies that prefer to match the number rather than the size when ordering.\u003c\/p\u003e\n\u003ch3\u003eWhat goes with it\u003c\/h3\u003e\n\u003cp\u003eWe list the second version with the same size as \u003ca href=\"\/en\/products\/puqpress-tamperteller-58-3mm-antihaft-m3-m6\"\u003eTamper plate 58.3 mm, number 1-210-0105-5\u003c\/a\u003e, and the smaller one as \u003ca href=\"\/en\/products\/puqpress-tamperteller-58mm-antihaft-m3-m6\"\u003eTamper plate 58 mm\u003c\/a\u003e. The same mount also holds the \u003ca href=\"\/en\/products\/puqpress-unterer-klemmring-m3-m4-m5-m6-matt-chrom\"\u003elower clamping ring\u003c\/a\u003e and the \u003ca href=\"\/en\/products\/puqpress-fuehrungsring-61x2-5-m3-m4-m5-m6\"\u003eguide ring for M3 to M6\u003c\/a\u003e. The whole category is under \u003ca href=\"\/en\/collections\/ersatzteile-macap-puqpress\"\u003eMacap and PuqPress spare parts\u003c\/a\u003e and under \u003ca href=\"\/en\/collections\/puqpress\"\u003ePuqpress\u003c\/a\u003e.\u003c\/p\u003e\n\u003cdiv class=\"ccc-roastery-tip\"\u003e\n\u003cp\u003e\u003cstrong\u003eFrom our workshop in Bern and Zurich\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe photograph the old plate together with its number before it goes in the bin. With two versions of the same size, that photo is the only record that really helps next time – this is our routine, not a manufacturer requirement. Afterwards we check with whatever is in the grinder at the time, usually \u003ca href=\"\/en\/products\/nutty-delight-kaffee-blend-brasilien-indien\"\u003eNutty Delight\u003c\/a\u003e, otherwise \u003ca href=\"\/en\/products\/cozy-chocolate-natural-brasilien-kaffeebohnen\"\u003eCozy Chocolate\u003c\/a\u003e or \u003ca href=\"\/en\/products\/very-nutty-kraftiger-robusta-aus-indien\"\u003eVery Nutty\u003c\/a\u003e. The full range is under \u003ca href=\"\/en\/collections\/kaffeebohnen\"\u003eCoffee beans\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ccc-return-note\"\u003e\n\u003cp\u003e\u003cstrong\u003eReturns excluded\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOriginal spare parts are excluded from exchange and return. They are sourced specifically for each order and cannot be resold once they have been installed or test-fitted on a machine. So before ordering, please check the model, year of manufacture and serial number of your machine – or drop us a quick line and we will clarify the fit together. Your rights in the event of defective goods remain unaffected.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ccc-faq\"\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003e\u003cstrong\u003eWhy are there two plates with the same size?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eBecause our documentation lists two numbers, 1-210-0105-5 and 1-210-0255-2, with an identical description. It names no difference in construction, and we are not going to invent one here. If in doubt, send us a photo of your old plate.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eWhich one should I choose if I don't know the number?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eThen drop us a quick line telling us which unit you have and what year it is from. We would rather clarify this in advance than have an original spare part lie around unused.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003e58 or 58.3 millimetres?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eThat depends on the basket you work with. We stock both sizes.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eAre fixings included?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eYou receive the plate. Whether screws should be replaced as well on your unit will become clear when you remove it.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eCan I pick up the part in your shop?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eYes. We are in Bern at Gerberngasse 44 and in Zurich at Hagenholzstrasse 50b. Drop us a quick line telling us which part you need, and we will have it ready for you.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003eQuestions about fit? Write to us at \u003ca href=\"mailto:office@coffeecoachingclub.ch\"\u003eoffice@coffeecoachingclub.ch\u003c\/a\u003e. We deliver across Switzerland and to Liechtenstein in 2-4 working days.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"Why are there two plates with the same size?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Because our documentation lists two numbers, 1-210-0105-5 and 1-210-0255-2, with an identical description. It names no difference in construction.\"}},{\"@type\":\"Question\",\"name\":\"Which one should I choose if I don't know the number?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Drop us a quick line telling us which unit you have and what year it is from. We would rather clarify this in advance.\"}},{\"@type\":\"Question\",\"name\":\"58 or 58.3 millimetres?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"That depends on the basket you work with. We stock both sizes.\"}},{\"@type\":\"Question\",\"name\":\"Are fixings included?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"You receive the plate. Whether screws should be replaced as well will become clear when you remove it.\"}},{\"@type\":\"Question\",\"name\":\"Can I pick up the part in your shop?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. We are in Bern at Gerberngasse 44 and in Zurich at Hagenholzstrasse 50b. Drop us a quick line telling us which part you need.\"}}]}\u003c\/script\u003e\n\u003c\/div\u003e","brand":"PuqPress","offers":[{"title":"Default Title","offer_id":56309424324993,"sku":"A04564","price":162.91,"currency_code":"CHF","in_stock":true}]},{"product_id":"puqpress-oberer-klemmring-1-210-0007-8","title":"PuqPress Upper Clamping Ring – 1-210-0007-8","description":"\u003cdiv class=\"ccc-mobile-wrapper\"\u003e\n\u003cstyle\u003e.ccc-mobile-wrapper{max-width:880px;margin:0 auto;font-family:-apple-system,BlinkMacSystemFont,'Segoe UI',Roboto,Helvetica,Arial,sans-serif;color:#1d1d1f;line-height:1.65;font-size:17px}.ccc-mobile-wrapper h2{font-size:1.7em;line-height:1.25;margin:0 0 .6em;font-weight:700}.ccc-mobile-wrapper h3{font-size:1.3em;line-height:1.3;margin:1.8em 0 .5em;font-weight:700}.ccc-mobile-wrapper h4{font-size:1.05em;margin:1.1em 0 .2em}.ccc-mobile-wrapper p{margin:0 0 1em}.ccc-mobile-wrapper a{color:#0b6b5f;text-decoration:underline}.ccc-compare-table{width:100%;border-collapse:collapse;margin:1em 0;font-size:.97em}.ccc-compare-table th,.ccc-compare-table td{text-align:left;padding:10px 12px;border-bottom:1px solid #e3e3e6;vertical-align:top}.ccc-compare-table th{width:42%;font-weight:600;color:#3a3a3c}.ccc-roastery-tip{background:#eff6f4;border-left:4px solid #0b6b5f;border-radius:10px;padding:16px 18px;margin:1.6em 0}.ccc-return-note{background:#fdf3ef;border-left:4px solid #b4532a;border-radius:10px;padding:16px 18px;margin:1.6em 0}.ccc-faq h4{font-weight:700;margin:1.2em 0 .2em}@media(max-width:600px){.ccc-mobile-wrapper{font-size:16px}.ccc-mobile-wrapper h2{font-size:1.45em}.ccc-mobile-wrapper h3{font-size:1.18em}}\u003c\/style\u003e\n\u003ch2\u003eThe upper clamping ring keeps the tamper base centred – so every puck comes out level again\u003c\/h2\u003e\n\u003cp\u003eIn the PuqPress, the tamper base is not fixed rigidly but guided. The upper clamping ring is the part of this guide that holds the base from above and keeps it on its axis as it lowers. As long as it sits tight, the tamper comes down vertically onto the ground coffee and compresses it evenly across the whole surface.\u003c\/p\u003e\n\u003cp\u003eWhen the ring loosens, you notice it first on the puck: one side is shiny, the other stays matt and rough. Then comes the noise – a short click or a faint scraping when pressing, because the base has developed play in the ring that it did not have before.\u003c\/p\u003e\n\u003ch3\u003eWhen it is due\u003c\/h3\u003e\n\u003cp\u003eThe puck is compressed unevenly or shows a slanted edge. You can noticeably tilt or move the tamper base sideways by hand. A metallic click occurs when pressing. The espresso suddenly runs unevenly from the bottomless portafilter, even though grind size and dose are unchanged. Or the ring itself shows grooves, raised edges or worn chrome plating on the clamping surfaces.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003ctable class=\"ccc-compare-table\"\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eUpper clamping ring for the tamper base mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation location\u003c\/th\u003e\n\u003ctd\u003eTamper unit, above the tamper base\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003ePuqPress. The information we have on this number does not state which series and which tamper base range are covered – please check with us before ordering.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eScope of delivery\u003c\/th\u003e\n\u003ctd\u003eOne upper clamping ring. Tamper base, lower clamping ring and guide ring are separate items.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003e1-210-0007-8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVersion\u003c\/th\u003e\n\u003ctd\u003eMetal. We have no documentation on the surface finish and dimensions for this number.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003ePuqPress\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eInstallation by a qualified technician recommended\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eWho it is for\u003c\/h3\u003e\n\u003cp\u003eFor bars and roasteries that trigger the PuqPress hundreds of times a day, and for service technicians who want to get a tamper unit free of play again. Also for high-frequency home setups – a clamping ring is a wear part, not a defect.\u003c\/p\u003e\n\u003ch3\u003eImportant for installation\u003c\/h3\u003e\n\u003cp\u003eThe clamping ring sits in the moving drive of the tamper. Disconnect the device from the mains before any work and have the tamper unit opened by a qualified technician. The ring must be fitted perfectly aligned and with the specified tightening, otherwise the base will tilt and the guide will be damaged. We deliberately do not provide step-by-step instructions here.\u003c\/p\u003e\n\u003ch3\u003eWhat goes with it\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"\/en\/products\/puqpress-unterer-klemmring-m3-m4-m5-m6-matt-chrom\"\u003eLower clamping ring for M3 to M6\u003c\/a\u003e as its counterpart, the \u003ca href=\"\/en\/products\/puqpress-fuehrungsring-61x2-5-m3-m4-m5-m6\"\u003eguide ring 61 × 2.5 mm\u003c\/a\u003e, the \u003ca href=\"\/en\/products\/puqpress-tamperteller-58mm-antihaft-m3-m6\"\u003e58 mm tamper base with non-stick coating\u003c\/a\u003e and the whole category \u003ca href=\"\/en\/collections\/ersatzteile-macap-puqpress\"\u003eMacap and PuqPress spare parts\u003c\/a\u003e.\u003c\/p\u003e\n\u003cdiv class=\"ccc-roastery-tip\"\u003e\n\u003cp\u003e\u003cstrong\u003eFrom our workshop in Bern and Zurich\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is our routine, not a manufacturer specification: once a month we check the tamper unit with a simple test – device off, grab the base, wiggle it sideways. If nothing moves, all is well. If something moves, we note it and replace the clamping ring and guide ring together at the next service. Then we pull three shots and look at the puck before releasing the machine again – preferably with \u003ca href=\"\/en\/products\/nutty-delight-kaffee-blend-brasilien-indien\"\u003eNutty Delight\u003c\/a\u003e, because this blend immediately reveals an uneven extraction as sourness. If you prefer testing with something chocolatey, take \u003ca href=\"\/en\/products\/cozy-chocolate-natural-brasilien-kaffeebohnen\"\u003eCozy Chocolate\u003c\/a\u003e, and for building pressure in milk drinks, \u003ca href=\"\/en\/products\/very-nutty-kraftiger-robusta-aus-indien\"\u003eVery Nutty\u003c\/a\u003e is our candidate. Everything else is in \u003ca href=\"\/en\/collections\/kaffeebohnen\"\u003eCoffee beans\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ccc-return-note\"\u003e\n\u003cp\u003e\u003cstrong\u003eReturns excluded\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOriginal spare parts are excluded from exchange and return. They are procured to order and cannot be resold after installation or test fitting on a machine. So before ordering, check the model, year of manufacture and serial number of your machine – or drop us a quick line and we will clarify the fit together. Your rights in the event of defective goods remain unaffected.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ccc-faq\"\u003e\n\u003ch4\u003e\u003cstrong\u003eWhich PuqPress models fit this number?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eThe part number is 1-210-0007-8. The item description available to us does not indicate which series it covers, and we make no claims here. Send us your device's serial number and we will check the fit.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eHow does this ring differ from the upper clamping ring 1-210-0243-8?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eThe other item additionally states 71 mm and a tamper base range of 56 to 59 mm; this one states no dimension. That is why both are listed as separate items. We have no further documentation on the difference.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eIs the tamper base included?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eNo. Only the upper clamping ring is supplied. Tamper base, lower clamping ring and guide ring are separate items.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eCan I replace the ring myself?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eWe recommend installation by a qualified technician. The ring sits in the moving drive; if it sits crooked, the base tilts and damages the guide.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eCan I see the part in your Showroom?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eOur showrooms in Bern (Gerberngasse 44) and Zurich (Hagenholzstrasse 50b) show a wide selection, but not our entire range – the display changes. Drop us a quick line at \u003ca href=\"mailto:office@coffeecoachingclub.ch\"\u003eoffice@coffeecoachingclub.ch\u003c\/a\u003e before your visit, and we will check whether the product you have in mind is currently there. Bring your device's serial number and we will check the fit together at the counter.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003eQuestions about fit? Write to us at \u003ca href=\"mailto:office@coffeecoachingclub.ch\"\u003eoffice@coffeecoachingclub.ch\u003c\/a\u003e. We deliver across Switzerland and to Liechtenstein in 2-4 working days.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"Which PuqPress models fit this number?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The part number is 1-210-0007-8. The item description available to us does not indicate which series it covers. Send us your device's serial number and we will check the fit.\"}},{\"@type\":\"Question\",\"name\":\"How does this ring differ from the upper clamping ring 1-210-0243-8?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The other item additionally states 71 mm and a tamper base range of 56 to 59 mm; this one states no dimension. That is why both are listed as separate items.\"}},{\"@type\":\"Question\",\"name\":\"Is the tamper base included?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"No. Only the upper clamping ring is supplied. Tamper base, lower clamping ring and guide ring are separate items.\"}},{\"@type\":\"Question\",\"name\":\"Can I replace the ring myself?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"We recommend installation by a qualified technician. The ring sits in the moving drive and, if seated crooked, tilts the base.\"}},{\"@type\":\"Question\",\"name\":\"Can I see the part in your Showroom?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Our showrooms in Bern (Gerberngasse 44) and Zurich (Hagenholzstrasse 50b) show a wide selection, but not our entire range – the display changes. Drop us a quick line at office@coffeecoachingclub.ch before your visit, and we will check whether the product you have in mind is currently there.\"}}]}\u003c\/script\u003e\n\u003c\/div\u003e","brand":"PuqPress","offers":[{"title":"Default Title","offer_id":56309470331265,"sku":"A04557","price":179.52,"currency_code":"CHF","in_stock":true}]},{"product_id":"puqpress-oberer-klemmring-71mm-m3-m6-1-210-0243-8","title":"PuqPress upper clamping ring 71 mm for 56 to 59 mm tamper bases – matt chrome-plated, 1-210-0243-8","description":"\u003cdiv class=\"ccc-mobile-wrapper\"\u003e\n\u003cstyle\u003e.ccc-mobile-wrapper{max-width:880px;margin:0 auto;font-family:-apple-system,BlinkMacSystemFont,'Segoe UI',Roboto,Helvetica,Arial,sans-serif;color:#1d1d1f;line-height:1.65;font-size:17px}.ccc-mobile-wrapper h2{font-size:1.7em;line-height:1.25;margin:0 0 .6em;font-weight:700}.ccc-mobile-wrapper h3{font-size:1.3em;line-height:1.3;margin:1.8em 0 .5em;font-weight:700}.ccc-mobile-wrapper h4{font-size:1.05em;margin:1.1em 0 .2em}.ccc-mobile-wrapper p{margin:0 0 1em}.ccc-mobile-wrapper a{color:#0b6b5f;text-decoration:underline}.ccc-compare-table{width:100%;border-collapse:collapse;margin:1em 0;font-size:.97em}.ccc-compare-table th,.ccc-compare-table td{text-align:left;padding:10px 12px;border-bottom:1px solid #e3e3e6;vertical-align:top}.ccc-compare-table th{width:42%;font-weight:600;color:#3a3a3c}.ccc-roastery-tip{background:#eff6f4;border-left:4px solid #0b6b5f;border-radius:10px;padding:16px 18px;margin:1.6em 0}.ccc-return-note{background:#fdf3ef;border-left:4px solid #b4532a;border-radius:10px;padding:16px 18px;margin:1.6em 0}.ccc-faq h4{font-weight:700;margin:1.2em 0 .2em}@media(max-width:600px){.ccc-mobile-wrapper{font-size:16px}.ccc-mobile-wrapper h2{font-size:1.45em}.ccc-mobile-wrapper h3{font-size:1.18em}}\u003c\/style\u003e\n\u003ch2\u003e71 millimetre clamping for tamper bases from 56 to 59 millimetres\u003c\/h2\u003e\n\u003cp\u003eThis upper clamping ring grips the tamper base from above and keeps it on axis as it lowers. It is designed for tamper bases with a diameter of 56 to 59 millimetres and is matt chrome-plated – the same finish as the lower clamping ring of the same family.\u003c\/p\u003e\n\u003cp\u003eIf the clamping works loose, the base shifts a few tenths of a millimetre to the side when tamping. On the puck you see this as a slanted top edge; in a bottomless portafilter, as a stream that starts earlier on one side. Reacting with a finer grind setting means correcting at the wrong end.\u003c\/p\u003e\n\u003ch3\u003eWhen it is due\u003c\/h3\u003e\n\u003cp\u003eThe tamper base has noticeable play when you move it sideways with the device switched off. Tamping clicks or scrapes. The puck is compressed unevenly on one side. The matt chrome surface of the ring shows scoring or bare spots. Or you have replaced the tamper base and want to renew the clamping at the same time – that is the clean way to do it.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003ctable class=\"ccc-compare-table\"\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eUpper clamping ring for the tamper base mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation location\u003c\/th\u003e\n\u003ctd\u003eTamper unit, above the tamper base\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003ePuqPress M3, M4, M5 and M6. Designed for tamper bases with a diameter of 56 to 59 mm.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eScope of delivery\u003c\/th\u003e\n\u003ctd\u003eOne upper clamping ring. Tamper base, lower clamping ring and guide ring are separate items.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003e1-210-0243-8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVersion\u003c\/th\u003e\n\u003ctd\u003e71 mm, matt chrome-plated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003ePuqPress\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eInstallation by a qualified technician recommended\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eWho it is for\u003c\/h3\u003e\n\u003cp\u003eFor anyone who uses a PuqPress M3 to M6 every day and wants the tamper unit free of play again. And for service workshops that renew the entire clamping when replacing the base, instead of opening the unit twice.\u003c\/p\u003e\n\u003ch3\u003eImportant for installation\u003c\/h3\u003e\n\u003cp\u003eThe ring sits in the moving drive of the tamper. Disconnect the device from the mains and have the tamper unit opened by a qualified technician. The ring must sit perfectly aligned; if it is fitted at an angle, it damages the base and the guide. We deliberately do not provide step-by-step instructions here.\u003c\/p\u003e\n\u003ch3\u003eWhat goes with it\u003c\/h3\u003e\n\u003cp\u003eThe counterpart is the \u003ca href=\"\/en\/products\/puqpress-unterer-klemmring-m3-m4-m5-m6-matt-chrom\"\u003elower clamping ring for M3 to M6\u003c\/a\u003e. Also matching: the \u003ca href=\"\/en\/products\/puqpress-fuehrungsring-61x2-5-m3-m4-m5-m6\"\u003eguide ring 61 × 2.5 mm\u003c\/a\u003e, the \u003ca href=\"\/en\/products\/puqpress-tamperteller-58mm-antihaft-m3-m6\"\u003e58 mm\u003c\/a\u003e and \u003ca href=\"\/en\/products\/puqpress-tamperteller-58-3mm-antihaft-m3-m6\"\u003e58.3 mm\u003c\/a\u003e non-stick coated tamper bases and the category \u003ca href=\"\/en\/collections\/ersatzteile-macap-puqpress\"\u003eMacap and PuqPress spare parts\u003c\/a\u003e.\u003c\/p\u003e\n\u003cdiv class=\"ccc-roastery-tip\"\u003e\n\u003cp\u003e\u003cstrong\u003eFrom our workshop in Bern and Zurich\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOur routine, not the manufacturer's: we measure the tamper base before ordering a clamping ring. 58 or 58.3 millimetres both fall within the 56 to 59 range, but if you are coming from a third-party base, you are sometimes off – and a ring that does not grip costs more than a minute with the caliper. After installation we pull three shots and look at the puck. \u003ca href=\"\/en\/products\/nutty-delight-kaffee-blend-brasilien-indien\"\u003eNutty Delight\u003c\/a\u003e shows an uneven extraction immediately as sourness, \u003ca href=\"\/en\/products\/cozy-chocolate-natural-brasilien-kaffeebohnen\"\u003eCozy Chocolate\u003c\/a\u003e is the milder cross-check, and for milk drinks we use \u003ca href=\"\/en\/products\/very-nutty-kraftiger-robusta-aus-indien\"\u003eVery Nutty\u003c\/a\u003e. Everything else is in \u003ca href=\"\/en\/collections\/kaffeebohnen\"\u003eCoffee beans\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ccc-return-note\"\u003e\n\u003cp\u003e\u003cstrong\u003eReturns excluded\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOriginal spare parts are excluded from exchange and return. They are procured specifically for each order and cannot be resold after installation or test fitting on the device. So before ordering, check the model, year of manufacture and serial number of your machine – or drop us a line and we will clarify the fit together. Your rights in the event of defective goods remain unaffected.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"ccc-faq\"\u003e\n\u003ch4\u003e\u003cstrong\u003eDoes the ring fit my tamper base?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eIt is designed for tamper bases with a diameter of 56 to 59 millimetres. Measure your base if you are unsure, or write to us – we will check it together.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eHow does this ring differ from the upper clamping ring 1-210-0007-8?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eThis item specifies 71 mm, the matt chrome-plated version and the tamper base range of 56 to 59 mm. The other number does not specify a size. Both are therefore listed as separate items; how else they differ is not documented to us.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eDo I need the lower clamping ring as well?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eNot necessarily. If the clamping as a whole is worn out, it is worth replacing both rings in the same job – the unit only has to be opened once anyway.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eIs this an electrical part?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eNo, it is purely mechanical. The drive itself is not part of the delivery and is not supplied here.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eCan I see the part in your Showroom?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eYes. We are in Bern at Gerberngasse 44 and in Zurich at Hagenholzstrasse 50b. Bring the serial number of your device and we will check the fit together at the counter.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003eQuestions about the fit? Write to us at \u003ca href=\"mailto:office@coffeecoachingclub.ch\"\u003eoffice@coffeecoachingclub.ch\u003c\/a\u003e. Delivery across Switzerland and to Liechtenstein in 2-4 working days.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"Does the ring fit my tamper base?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"It is designed for tamper bases with a diameter of 56 to 59 millimetres. Measure your base or write to us.\"}},{\"@type\":\"Question\",\"name\":\"How does this ring differ from the upper clamping ring 1-210-0007-8?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"This item specifies 71 mm, the matt chrome-plated version and the tamper base range of 56 to 59 mm. The other number does not specify a size.\"}},{\"@type\":\"Question\",\"name\":\"Do I need the lower clamping ring as well?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Not necessarily. If the clamping as a whole is worn out, it is worth replacing both rings in the same job.\"}},{\"@type\":\"Question\",\"name\":\"Is this an electrical part?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"No, it is purely mechanical. The drive itself is not part of the delivery.\"}},{\"@type\":\"Question\",\"name\":\"Can I see the part in your Showroom?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. We are in Bern at Gerberngasse 44 and in Zurich at Hagenholzstrasse 50b.\"}}]}\u003c\/script\u003e\n\u003c\/div\u003e","brand":"PuqPress","offers":[{"title":"Default Title","offer_id":56309470364033,"sku":"A04563","price":179.52,"currency_code":"CHF","in_stock":true}]}],"url":"https:\/\/coffeecoachingclub.ch\/en\/collections\/ersatzteile-macap-puqpress.oembed","provider":"Coffee Coaching Club GmbH","version":"1.0","type":"link"}