Rocket back panel black – Mozzafiato up to 2025
Black panels are unforgiving. A scratch on the edge or a dent along the rim shows immediately, because the light breaks on it differently than on the rest of the surface.
This item is the black back panel of the Mozzafiato for machines built up to 2025, part number C01B00425.
When it is due
The panel is dented, scratched or discoloured at the edges – in transport, during servicing or over the years in its location.
The screw holes are torn out, so the panel no longer sits flat and one edge sticks out.
After water damage, rust or limescale marks appear that can no longer be polished away.
At a glance
| Type |
Back panel, housing panel |
| Location |
Rear of the machine |
| Fits |
Rocket Mozzafiato, built up to 2025 |
| Scope of delivery |
one panel, without screws and without logo |
| Part number |
C01B00425 |
| Finish |
black |
| Brand |
Rocket Espresso |
| Installation |
Installation by a qualified technician recommended |
Important for installation
Behind the back panel sit the boiler, the lines and the electrics. Only remove it when the machine is disconnected from the mains, depressurised and cooled down.
The back panel is screwed on from the outside, but it sits directly in front of live parts. We therefore recommend leaving the replacement to a qualified technician, and we deliberately do not publish step-by-step instructions.
When fitting it, take care with the edges: a warped panel will never sit cleanly again, and the screw holes will not allow for it any more.
The back panels in the Rocket catalogue
Back panels differ by machine, colour and material. Mixing them up costs time, because you only notice once the machine is already open. We stock these items:
R60, stainless steel – A019905648
R58 – A010004658
R Cinquantotto – A019906928
R Cinquantotto, logo back panel
Mozzafiato, black, up to 2025 – C01B00425
Appartamento TCA, copper – A019908570
Appartamento TCA, black – A019908569
Appartamento TCA, white – A019908568
The documentation does not state dimensions, sheet thickness or surface treatment for any of these items. If you are unsure, send us the serial number and we will identify the right back panel.
Who it is for
For anyone who wants their machine to look neat again after years of use, and for workshops that only replace the panel after transport damage instead of the whole housing.
Also useful when the machine moves and the rear suddenly becomes visible – on an island counter in a café, for example.
What goes with it
For the Mozzafiato we stock the three side panels – left, 1st generation, left, 2nd generation and right, 2nd generation – as well as the hot water spout. All parts for the series are listed under Rocket Mozzafiato spare parts.
From our workshop
When we replace a back panel in Bern or Zurich, we lay the screws down in the order they come out and tighten them crosswise at the end – first all by hand, then firmly one after the other. That way the panel does not warp and the gaps stay even. This is our workshop routine, not a manufacturer specification.
Afterwards the machine warms up idle for half an hour before we pull the first shot – Cozy Chocolate is our standard for this. More beans under Coffee beans.
Returns excluded
Original spare parts are excluded from exchange and return. They are procured specifically for each order and cannot be resold after installation or test fitting on the machine. So before ordering, check the model, year of manufacture and serial number of your machine – or drop us a quick line and we will clarify the fit together. Your rights in the case of defective goods remain unaffected.
Frequently asked questions
What does up to 2025 mean?
That is what the documentation says: part number C01B00425 is assigned to machines built up to 2025. Newer machines use a different number. Send us the serial number and we will check it.
Are screws or a logo included?
No. You receive the panel. We stock the logo and the fixing screws as separate items, where available.
What are the dimensions of the back panel?
The documentation does not state dimensions, sheet thickness or surface treatment. We deliberately do not give figures here that we cannot back up. Send us the serial number and we will check the fit.
Is this an electrical part?
No. The back panel is a housing panel. However, the boiler and electrics sit behind it, so the replacement belongs in expert hands.
Can I see the part in your showroom?
Yes. We are in Bern at Gerberngasse 44 and in Zurich at Hagenholzstrasse 50b. Bring the serial number of your machine and we will check the fit together at the counter.
Questions about the fit? Write to us at [email protected] – ideally with the model and serial number of your machine. We deliver across Switzerland and to Liechtenstein in 2-4 working days.
