The right flank of your Mozzafiato – free of dents and scratches again
The side panel is the first thing you see of your machine. It does no work, it holds no pressure, it carries no water – and yet it decides whether the Mozzafiato on the counter looks like a well-kept machine or like one that has already fallen over at some point.
A dent from transport, a scratch from moving it, a mark that can no longer be polished away: if that annoys you every time you look at it, a new panel is the simplest repair there is. It is screwed on from the outside, without anyone having to get inside the machine.
When it's due
When the panel is dented, scratched or warped. When it no longer closes cleanly after transport damage. When you want to bring a second-hand machine up to the visual standard it deserves.
At a glance
| Type |
Side panel, right side |
| Generation |
2nd generation, 14 mm thick |
| Installation position |
right outer side of the housing, screwed on from the outside |
| Fits |
Rocket Mozzafiato, 2nd generation |
| Scope of delivery |
one panel, without screws and without inserts |
| Part number |
A057706157 |
| Version |
Original Rocket spare part |
| Brand |
Rocket Espresso |
Who it's for
For anyone whose Mozzafiato runs flawlessly on the inside but has suffered on the outside – and for dealers who refurbish a used machine before reselling it.
The Mozzafiato side panels
The panels differ in side and in thickness – and the thickness decides whether they fit. If in doubt, measure your old panel:
We don't stock a right panel of the 1st generation. If you need one, write to us – we'll request it for you.
What goes with it
For the Mozzafiato we stock, among other things, the complete steam wand with valve, the steam and water tap and the drip tray grille. All parts for your model are listed under Rocket Mozzafiato spare parts and Original spare parts.
Workshop tip from Bern and Zurich
We always tighten panel screws crosswise and only hand-tight – if you fully tighten one corner first, you put the sheet metal under tension, and then the edge sticks out. And when polishing, always wipe along the grain, never in circles. That's our workshop routine, not a manufacturer specification. To dial in afterwards we use Nutty Delight, for chocolatey notes Cozy Chocolate and for body Very Nutty. All roasts under Coffee beans.
Returns excluded
Original spare parts are excluded from exchange and return. They are sourced specifically for each order and cannot be put back on sale after installation or a test fit on the machine. So before ordering, check the model, year of manufacture and serial number of your machine – or drop us a quick line and we'll clarify the fit together. Your rights regarding defective goods remain unaffected.
Frequently asked questions
How do I find out whether I need the 8 mm or the 14 mm version?
Measure your installed panel at the edge. The 1st generation is 8 mm thick, the 2nd generation 14 mm. If you're unsure, send us a photo and the serial number.
Is the right panel also available in the 1st generation?
Not in our catalogue. Write to us and we'll request it for you.
Are screws included?
No, the panel is supplied on its own. You keep using the screws from your machine.
Can I replace the panel myself?
Yes. It is screwed on from the outside, you don't need to open the machine. Still, disconnect it from the mains beforehand and let it cool down.
Can I see the part in the showroom?
Our showrooms in Bern (Gerberngasse 44) and Zurich (Hagenholzstrasse 50b) show a wide selection, but not our entire range – the display changes. Drop us a quick line at [email protected] before your visit, and we will check whether the product you have in mind is currently there.
Questions? Write to [email protected]. Delivery across Switzerland and to Liechtenstein in 2-4 working days.
