One tray for four model series
Mozzafiato, Giotto, R Cinquantotto and R58 share the same housing dimensions – and therefore the same drip tray. It catches whatever comes out during rinsing, knocking out and frothing, and channels it to the drain. In other words: it stands in water every day, while the rest of the machine only dreams of it.
This item is the tray alone, without the grille. The part number is R01L006574; older documents still list the same tray under R01L005125. If you need the tray together with the grille, you will find the complete version further down.
When it is due
The bottom has turned grey from limescale and no longer comes out even, not even with descaler. A corner got dented when pulling the tray out, and the grille has wobbled ever since. Rust is showing at the drain. Or the tray no longer sits cleanly in its guide and has to be pushed when sliding it in – then the sheet metal has warped.
At a glance
| Type |
Drip tray without grille |
| Location |
under the brew group, loosely slid in |
| Fits |
Rocket Mozzafiato, Giotto, R Cinquantotto and R58 |
| Scope of delivery |
the tray, without grille, without collecting container and without sealing plug |
| Part number |
R01L006574 (replaces R01L005125) |
| Design |
Dimensions, sheet thickness and surface finish are not specified in the documentation |
| Brand |
Rocket |
Who it is for
For anyone who only needs the tray because the grille is still in perfect condition – that is the more common case, as the grille sits higher and gets less standing water. No tools are needed: the tray is pulled out and the new one slid in.
What goes with it
The matching grille is the Grille for drip tray Mozzafiato, Giotto, R Cinquantotto and R58. If you need both together, take the Complete drip tray with grille. Related parts are the plastic collecting container, the sealing plug with O-ring and the waste water hose. Everything else in Rocket R Cinquantotto spare parts, Rocket Mozzafiato and in the spare parts.
From our workshop in Bern and Zürich
When a machine comes in for an overhaul, the first thing we do is take out the drip tray and set it aside – not out of love of tidiness, but because its condition shows you in ten seconds how the machine has been looked after. A tray that shines on the outside and has a limescale ring on the inside tells a different story from one that shows even wear. That is our routine, not a manufacturer's requirement. For the test extraction afterwards we like to use Nutty Delight, for milk Cozy Chocolate and for more punch Very Nutty. More in our coffee beans.
Returns excluded
Spare parts are excluded from exchange and return. They are procured specifically for each order and cannot be resold after installation or a trial fitting on the machine. Therefore, check the model, year of manufacture and serial number of your machine before ordering – or drop us a quick message and we will clarify the fit together. Your rights in the event of defective goods remain unaffected.
Frequently asked questions
Is the grille included?
No. Here you get the tray alone. The grille is a separate item, and the combination of tray and grille is also available as a separate article – both are linked above.
What does the second number R01L005125 mean?
That is the former part number of the same tray. The current one is R01L006574. If your service documentation still shows the old number, you are in the right place.
Does the tray also fit an Appartamento?
No. The Appartamento has different housing dimensions and its own drip tray. Ask us if you are unsure which model series you have.
What are the dimensions of the tray?
Length, width, height, sheet thickness and surface finish are not documented. Send us the serial number and we will check the fit.
Can I see the part in your showroom?
Yes. We are in Bern at Gerberngasse 44 and in Zürich at Hagenholzstrasse 50b. Let us know shortly beforehand and we will have the part ready for you.
Questions about the fit? Write to us at [email protected]. We deliver across Switzerland and to Liechtenstein in 2-4 working days.
