A foot that lets the machine stand steady again
Raised feet create space under the machine: for taller vessels under the spout, for the cloth when cleaning, for a working height your back still appreciates after an eight-hour shift. This foot is the rubber version for the Linea Classic in the newer build version – the part that makes contact with the counter and absorbs the vibration of the pump instead of passing it on into the wood.
When the rubber is flattened or torn, the machine shifts a few millimetres during tamping, the drip tray grille rattles, and the steady hum turns into a drone in the counter. That's the moment for a fresh foot – and often only one of the four has suffered.
When it's due
The rubber is cracked, hard or squashed flat. The machine wobbles or slides even though it is standing level. During extraction, the vibration clearly carries into the counter. The thread is distorted because the machine was once set down on the foot. Or you're lifting the machine anyway, for example for the water connection, and swap it at the same time.
At a glance
| Type |
Raised foot with rubber, single piece |
| Installation location |
Underside of the machine housing |
| Fits |
La Marzocco Linea Classic, new model. Send us the serial number and we'll check whether your machine has the new or the older build version. |
| Scope of delivery |
1 foot with rubber. Not a set, not four pieces. |
| Part number |
C.1.369.R |
| Version |
New model |
| Brand |
La Marzocco |
Who it's for
For cafés that want to replace a single damaged foot without buying a whole set, and for technicians who want to have a spare on hand when setting up a Linea Classic. If you want to renew all four positions, order four pieces accordingly.
What goes with it
Further parts for this series can be found under La Marzocco Linea Classic spare parts. For the older build version and for the GB5 X, we carry the raised foot CL001/1G.R. As a complete set for other series, there are the raised feet for the Linea PB and the raised feet for GB5 and FB80. Everything else is under Service parts.
Our routine in Bern and Zurich, not a manufacturer specification: we don't level the machine by eye, but place a spirit level across the cup tray and adjust the feet so that the drip water drains evenly and the portafilter locks in equally far on both sides. Only then do we calibrate again. For dialling in, we use a coffee whose sweetness we know well, such as Nutty Delight or Cozy Chocolate, and for milk drinks Very Nutty. The selection is under Coffee beans.
Returns excluded
Service parts are excluded from exchange and return. They are procured specifically for each order and cannot be resold after installation or test-fitting on the machine. So before ordering, check the model, year of manufacture and serial number of your machine – or drop us a quick line and we'll clarify the fit together. Your rights in the case of defective goods remain unaffected.
Frequently asked questions
Do I get a set or one foot here?
A single foot. If you want to renew all positions, order the corresponding quantity.
How do I recognise the new model?
The surest way is via the serial number. Send it to us and we'll tell you whether C.1.369.R belongs on your machine or the older version.
How tall is the foot?
We don't have a verified measurement for this part, so we don't give one. Tell us what height you need under the spout and we'll check it with you.
Does a new foot help against vibration in the counter?
Often yes, because the rubber absorbs the oscillation of the pump. If the rubber has hardened, everything is transmitted directly to the work surface instead.
Can I pick up the part from your showroom?
Yes. Bern, Gerberngasse 44 or Zurich, Hagenholzstrasse 50b. Just let us know and it will be ready for you.
Questions about the fit? Write to us at [email protected]. We deliver across Switzerland and to Liechtenstein in 2-4 working days.
