Apax Lab TDS Meter (new model) – Measure the Mineral Content of Your Coffee Water
Probe in the water, wait 10 to 30 seconds, read the value: the Apax Lab TDS Meter shows how many minerals are dissolved in your brew water, in PPM and with a temperature display.
As the official Swiss importer of Apax Lab, we carry the meter together with the mineral concentrates Tonik, Jamm, Lylac and Konflux in Bern and Zurich.
What the device measures
Water is a solution of H₂O and dissolved minerals such as magnesium, calcium and bicarbonate. Pure H₂O barely conducts electricity; the more minerals are dissolved, the more conductive it becomes. The TDS Meter measures this conductivity and derives an estimated total of dissolved substances (Total Dissolved Solids) in PPM from it.
Which individual minerals are in the water is not something the device shows. It gives you a number to orient yourself by from recipe to recipe. With little mineral content, coffee often tastes flat; with a lot, the mineral impression settles over the finer notes. Where your optimum lies is also a matter of taste. Our opinion is one of many.
What Apax Lab designed the TDS Meter for
Checking base water
Check the TDS of the starting water before mixing, for example demineralised, distilled or other low-TDS water.
Checking finished water
After adding the Apax Lab concentrates, check whether the water is within the desired concentration range.
Comparing and repeating recipes
Keep dilutions consistent, compare different water recipes and make results reproducible across several brews.
Reading the temperature
The device also shows the water temperature. That way you can see whether the water is at around 25 °C for a reliable measurement.
How you go about it
Remove the protective cap, press ON/OFF, and the display reads 000. Hold the probe no more than 5 cm deep in water at around 25 °C and wait until the value is stable, usually 10 to 30 seconds. The HOLD button keeps the value on screen while you take the device out of the water. Then switch it off with ON/OFF, shake off the water or dab the probe dry with a clean cloth and put the protective cap back on.
If the symbol «x10» flashes on the display, multiply the displayed value by ten. The device does not belong in hot water. How to build your coffee water from scratch is shown on our page Composing Your Own Coffee Water, and the effect of hardness and alkalinity in the Water Chemistry Simulator.
At a glance
| Brand |
Apax Lab, Australia |
| Measuring principle |
Electrical conductivity, estimated TDS derived from it |
| Display |
Digital display in PPM, plus temperature display |
| Buttons |
ON/OFF, HOLD, TEMP |
| x10 symbol |
When it flashes, multiply the displayed value by ten |
| Measuring temperature |
Around 25 °C |
| Immersion depth |
5 cm maximum |
| Measuring time |
10 to 30 seconds until the value is stable |
| Protection |
Removable protective cap over the probe |
| Not suitable for |
Hot water |
Who it is made for
For everyone who would rather measure their brew water than estimate it: with Apax Lab concentrates from the Apax Lab Collection, with their own water recipes or with tap water that varies over the year. For espresso as well as filter coffee. Nobody needs a TDS Meter to make good coffee. You want it or you do not.
Water and scale belong together: if you want coffee scales that are affordable and precise, the Normcore Collection is the right place. If you want an app, a flow-rate display and Bluetooth, you will find the Acaia coffee scales. Filter solutions for plumbed-in and tank machines are in the BRITA Collection, and tampers, puck screens and WDT in the Barista Tools. Which machine and grinder suit your everyday routine is shown by our advice tool for coffee machines and grinders.
Frequently asked questions
Does the Apax Lab TDS Meter also measure the espresso in the cup?
No. Through conductivity it measures the minerals dissolved in the water, that is the TDS of the brew water. For the dissolved coffee solids in the finished espresso you need a refractometer, which works with light refraction.
Which mineral content suits coffee?
We work with an ideal range of around 50 to 100 mg/l, tending towards the upper end for espresso and somewhat below for filter. That is a guideline and a matter of taste at once, our recommendation is one of many.
Why does x10 flash on the display of the TDS Meter?
Then you multiply the displayed value by ten. With ready-mixed coffee water you will rarely see it, with heavily mineralised water more often.
Can I measure hot water with the TDS Meter?
No. Apax Lab states around 25 °C as the measuring temperature and advises against hot water. Let the water cool down or measure before you heat it. The device's temperature display helps with this.
Can I see the TDS Meter in person before buying?
Our showrooms in Bern (Gerberngasse 44) and Zurich (Hagenholzstrasse 50b) show a wide selection, but not our entire range. Write to us at [email protected] before your visit and we will check whether the device is there. Click & Collect is available at both showrooms, and delivery takes 2 to 5 business days throughout Switzerland and to Liechtenstein.
Roastery tip: Water makes up most of every cup. Measure it once and then brew a full-bodied roast like Cozy Chocolate or Nutty Delight, and you can compare water recipes in a targeted way. For maximum body without acidity there is Very Nutty, for a fruity experience Wild Peach. That is our recommendation, one of many.