The rail with the engraved R
The cup rail frames the cup tray of the R Cinquantotto and keeps cups from wandering over the edge. This version also carries the engraved Rocket R – the same mark you find on the brew lever and on the back panel.
Rocket offers the rail in two versions, with and without engraving, and the two part numbers differ in only two digits: A611006932 with engraving, A619906932 without. If you copy the number from a service document, look closely – we list both explicitly below.
When it’s time to replace it
The rail is bent and sits crooked on the tray. The surface is scratched or has turned dull and can no longer be polished back up. There are signs of rust at one of the mounting points. Or years of polishing have worn the engraving so flat that it’s barely visible.
At a glance
| Type |
Cup rail with R engraving |
| Installation location |
Cup tray on top of the machine |
| Fits |
Rocket R Cinquantotto |
| Scope of delivery |
the rail; the rear bar and fixing parts are separate items |
| Part number |
A611006932 (version without engraving: A619906932) |
| Version |
with engraved R; dimensions and finish are not specified in the documentation |
| Brand |
Rocket |
Who it’s for
For anyone whose R Cinquantotto came with the engraved rail from the factory and who wants to stay with the original when replacing it. If the engraving doesn’t matter to you, the version without engraving is the cheaper choice – it costs about CHF 26 less.
What goes with it
The alternative is the cup rail without engraving, and the rear bar goes with it. Underneath sits the R Cinquantotto cup tray. In the same sheet-metal group: the back panel and the right side panel, black. Everything for the machine in the Rocket R Cinquantotto spare parts and in the original spare parts.
From our workshop in Bern and Zurich
The engraving is where coffee dust and milk splashes settle. We go over it with a soft toothbrush and warm water, never with abrasive cleaner – that polishes the edges of the engraving round and makes it illegible within a few years. This is our routine, not a manufacturer requirement. Then we put the cups back on top and pull an espresso with Nutty Delight, Cozy Chocolate or Very Nutty. More in our coffee beans.
Returns excluded
Original spare parts are excluded from exchange and return. They are sourced specifically for each order and cannot be resold once they have been installed or test-fitted on a machine. So before ordering, check the model, year of manufacture and serial number of your machine – or drop us a quick message and we’ll check the fit together. Your rights in the event of defective goods remain unaffected.
Frequently asked questions
How does it differ from A619906932?
Only in the engraving. A611006932 carries the engraved R, A619906932 does not. The two numbers differ in just two digits – at Rocket, that’s the usual pattern for two versions of the same base number.
Why does the engraved version cost more?
The engraving is an additional production step, and the manufacturer prices the two versions differently. The difference is about CHF 26.
Is the rear bar included?
No. The rear bar is a separate item and is linked above.
What are the rail’s dimensions?
Dimensions, tube diameter and finish are not specified in the documentation. If in doubt, measure your old rail or send us a photo.
Can I see the part in your showroom?
Yes. We’re in Bern at Gerberngasse 44 and in Zurich at Hagenholzstrasse 50b. Let us know shortly beforehand and we’ll have the part ready for you.
Questions about fit? Write to us at [email protected]. We deliver across Switzerland and to Liechtenstein in 2-4 working days.
