Weber Workshops EG-1 Mk.3 – 80mm Flat Burr Grinder (Clearance)
Buy the Weber Workshops EG-1 Mk.3 in Switzerland: single-dose grinder with 80mm flat burrs, variable speed and a magnetic grinding chamber. Bern and Zurich.
This is the EG-1 Mk.3, the previous model of the redesigned EG-1 with Vibe Tone and Intrinsic Alignment. You'll find the current generation in our Weber Workshops Collection. Weber describes the Mk.3 as a zero-retention flat burr grinder designed for filter coffee and espresso. Coffee Coaching Club is the official Swiss importer of Weber Workshops.
Features of the EG-1 Mk.3
Grind size in 5-micron steps
The grind size adjusts in 5-micron steps from Turkish fine to filter and back again. This lets you switch between brew methods without cleaning, purging and re-dialling the grinder.
Variable speed
According to Weber, the EG-1 was the first grinder in the industry to offer variable speed, in 2015. A PID controller detects the hardness of the beans and adjusts the motor in real time to hold the set speed.
Easy cleaning
The grinding chamber opens, cleans thoroughly and closes again in around 30 seconds. The upper and lower funnel caps form a clamshell held together by strong neodymium magnets. According to Weber, this cleaning changes neither the grind size nor the burr alignment.
Purge button
New in the Mk.3 is a purge button at the centre of the speed dial with two functions. From standstill, it runs the burrs in reverse and then briefly at maximum speed. This dislodges foreign objects or unroasted beans and clears out the last coffee residue. Pressed during grinding, it gives a short burst at maximum speed.
80mm burrs
The Weber Workshops CORE set comes installed from the factory, designed for everything from filter coffee to espresso. The burrs are mounted magnetically and have no screw holes where old coffee can collect. For filter coffee only, Weber recommends the ULTRA set from SSP.
Blind Shaker
The grounds fall into the Blind Shaker and are briefly shaken before going into the portafilter. According to Weber, this reduces static and channeling, and keeps the counter free of grounds. The Blind Shaker was developed by Weber Workshops, and the oak plate centres it under the spout.
The details in daily use
Aligning the burrs
The burrs are accessible without tools in under 20 seconds. Alignment can be checked and corrected if needed with a 4mm Allen key, without taking the grinder apart.
Changing the burrs
With a 4mm Allen key and around five minutes, you swap the burrs and align them. Weber Workshops also offers CORE and ULTRA as individual sets.
Removable dosing cup
The upper dosing cup is held by two neodymium magnets and stainless steel pins and lifts off in one move for wiping.
Compatible worldwide
The EG-1 runs on 90 to 240 V and 50 to 60 Hz without a transformer. It connects via a cable with a C13 plug.
At a glance
| Burrs |
80mm CORE (DB-1) flat burrs, magnetically mounted |
| Optional burrs |
ULTRA (SSP), for filter coffee according to Weber |
| Grind size |
5-micron steps, Turkish fine to filter |
| Speed |
Variable, PID-controlled |
| Purge button |
Reverse run and burst at maximum speed |
| Retention |
Zero retention according to Weber |
| Dimensions (W × D × H) |
24.5 × 23.5 × 45.6 cm |
| Weight |
13.5 kg |
| Voltage |
90–240 V, 50–60 Hz |
| Power |
315–385 W |
| Power connection |
C13, 1.8 m cable |
| Colours |
Silver, Onyx |
| Included according to Weber |
EG-1, Blind Shaker in matching colour, oak plate, two leather protective pads, atomiser (RDT), five sets of spare wiper blades, cleaning brush with rosewood handle, power cable |
Who the EG-1 Mk.3 is made for
For anyone who grinds single dose, often switches between beans or between filter coffee and espresso, and wants burrs that can be cleaned in seconds and aligned on their own. You'll also find the redesigned EG-1 in the Weber Workshops Collection, and the comparison with the Lagom P80 and the Lagom 01 on the page EG-1 vs. Lagom P80 vs. Lagom 01.
For anyone who wants a grinder that is affordable and precise: the VS3 from Varia or a hand grinder from Comandante and Timemore. If you want to compare other 80mm concepts: Option-O. The advisory tool helps you choose.
In the Espresso Machine and Grinder Comparison, you test several grinders running side by side in a reserved hour, in Zurich Oerlikon including Weber Workshops, Option-O and Mahlkönig. It's an option, not a requirement. The consultation appointment in the showroom, by phone or virtually is free of charge.
Delivery across Switzerland and to Liechtenstein in 2 to 5 working days, Click & Collect in Bern, Gerberngasse 44 and Zurich, Hagenholzstrasse 50b. Financing available. We answer questions at [email protected], on coffeecoachingclub.ch or by phone during business hours.
What goes with it
Machines with a saturated group are available from La Marzocco, manual lever machines from Flair Espresso. For anyone who wants a scale that is affordable and precise: Normcore. If you want an app, Bluetooth and flow rate display: Acaia.
For puck preparation, there's the WDT tool from Normcore and the Moonraker from Weber Workshops. Store your beans airtight in a canister from Airscape, and build your coffee water with the mineral concentrates from Apax Lab.
Frequently asked questions
What is the difference between the EG-1 Mk.3 and the new EG-1?
The EG-1 Mk.3 is the previous model. Weber Workshops has redesigned the EG-1, including Vibe Tone and Intrinsic Alignment. Both grind with 80mm flat burrs.
Can I change the burrs on the EG-1 Mk.3?
Yes. With a 4mm Allen key and around five minutes, you swap the magnetically mounted burrs and align them. CORE comes installed from the factory; for filter coffee only, Weber recommends ULTRA from SSP.
Is the EG-1 Mk.3 suitable for filter coffee?
Yes. The grind size ranges in 5-micron steps from Turkish fine to filter. Weber recommends CORE for filter coffee and espresso, and ULTRA if you grind nothing but filter coffee.
How much effort is cleaning?
According to Weber, the grinding chamber opens, cleans and closes in around 30 seconds, without changing the grind size or alignment. Five sets of spare wiper blades are included.
Can I see the EG-1 Mk.3 before buying?
Our showrooms in Bern (Gerberngasse 44) and Zurich (Hagenholzstrasse 50b) show a wide selection, and the display changes. Write to us at [email protected] before your visit, and we'll check whether the grinder is currently on display.
How fast is the EG-1 Mk.3 delivered in Switzerland?
In 2 to 5 working days across Switzerland and to Liechtenstein. Click & Collect is available in Bern and Zurich, as is financing.
Tip from the roastery: For espresso on the EG-1 Mk.3, we recommend Cozy Chocolate and Nutty Delight, full-bodied with chocolate and nut. For maximum body without acidity: Very Nutty. If you want to discover something fruity, grind Wild Peach and compare lower and higher speeds: higher brings more body, lower more aroma. That's our recommendation, one of many.