The small cover that makes your grinder look finished again
On the AllGround Sense, one of the housing screws is hidden under a self-adhesive cover. It has no technical function; it keeps the front looking clean – and as soon as it is missing, all you see on the grinder is the hole.
The adhesive layer ages. Coffee oil, cleaning agents and heat loosen it over time; the cover then shifts out of place and catches on the cloth when wiping. It is replaced individually, part number 110000462.
When it's time to replace it
These signs point to a replacement:
- The cover is missing and the screw is exposed.
- It is lifting at one edge and collecting coffee dust underneath.
- It no longer stays in place after being pressed down.
- The surface is scratched or discoloured and stands out against the rest of the front.
At a glance
| Type |
Self-adhesive screw cover |
| Installation location |
On the outside of the housing, over the screw |
| Fits |
Fiorenzato AllGround Sense |
| Scope of delivery |
One cover |
| Part number |
110000462 |
| Version |
Original manufacturer part, self-adhesive |
| Brand |
Fiorenzato |
Who it's for
For anyone who wants a grinder in a shop or on a kitchen counter to look complete, and for workshops closing up the front again after a service. The only thing that matters is that the adhesive surface is dry and free of grease before you apply the cover – on an oily surface, even a new cover won't hold.
What goes with it
More small parts for this series are listed under Fiorenzato grinder spare parts. You'll find accessories for dosing and care under Coffee grinder accessories and spare parts, and cleaners for grinder and machine under Machine and grinder cleaning. The current models are listed under Fiorenzato.
From our workshop in Bern and Zurich
Before applying, we degrease the spot with a little alcohol on a cotton swab and let it air-dry for a minute – after that the cover holds much longer than if you simply press it on. This is our routine, not a manufacturer specification. Afterwards we always run a test dose, usually Nutty Delight, sometimes Cozy Chocolate or Very Nutty. More of them under Coffee beans.
Returns excluded
Original spare parts are excluded from exchange and return. They are sourced specifically for each order and cannot be resold after installation or a test fitting on the appliance. So before ordering, check the model, year of manufacture and serial number of your machine – or send us a quick message and we'll confirm the fit together. Your rights in the case of defective goods remain unaffected.
Frequently asked questions
How many covers do I get?
One per order line. If you need several, simply increase the quantity.
Does the adhesive hold on the cleaned front?
Yes, as long as the surface is dry and free of grease. Coffee oil is the most common reason a cover comes off again.
Does the cover have a technical function?
No. It visually closes the screw opening and keeps coffee dust out of it.
Does it also fit other Fiorenzato grinders?
We stock it for the AllGround Sense. For other series, send us the serial number and we'll check.
Can I pick up the part at the showroom?
Yes. We're in Bern at Gerberngasse 44 and in Zurich at Hagenholzstrasse 50b. Send us a quick message and we'll have it ready for you.
Questions about fit? Write to us at [email protected]. We deliver across Switzerland and to Liechtenstein in 2-4 working days.
