The surface where your cups stand all day long
The drip tray grate is the part of the machine that gets handled the most and noticed the least. Every cup lands on it, every rinse runs through it, and at closing time it is lifted out, knocked out and washed. This flat version is made of wire and covers the drip tray of the Linea PB with two groups.
You can tell that a grate is due better from the side than from above: the wire surface is no longer level and sags in the middle, where heavy milk jugs have been set down for years. Cups then tip slightly and the surface feels unsteady. The part number of this item is C.1.237.2.
When it's due
The grate no longer lies flat and rocks. Individual wires are bent or broken at a weld. The surface shows rust spots that can no longer be removed. Or cups stand crooked because the surface has sunk in the middle.
At a glance
| Type |
Drip tray grate, flat wire version |
| Location |
sits on the drip tray, inserted from above |
| Fits |
La Marzocco Linea PB, 2-group |
| Scope of delivery |
one drip tray grate |
| Part number |
C.1.237.2 |
| Version |
flat, wire. We have no documentation on dimensions or finish. |
| Brand |
La Marzocco |
Drip trays, drip tray grates and top pieces in our catalogue
Tray, grate and top piece are three different parts, and the number of groups matters too. So that you order the right one, here are the items we carry:
Not sure which version your machine is or how many groups it has? Send us the serial number – we'll check it before you order.
Who it's for
For businesses with a 2-group Linea PB where the grate is giving way after years of continuous use. A new grate is the most affordable visible refresh on a machine that will otherwise keep running for a long time.
What goes with it
All other parts for this machine are listed under Spare parts Linea PB. The 3-group version of the same grate has the number C.1.237.3. You can find an overview of all original spare parts under Original spare parts, and products against limescale marks on the grate under Machine and grinder cleaning.
From our workshop
In Bern and Zurich we take the grates out in the evening and stand them on edge to dry instead of putting them back into the tray wet. Standing water between grate and tray is what causes the rust spots – this is our routine, not a manufacturer requirement, but it visibly keeps the grates looking good for longer. And what looks best on a freshly cleaned grate: Nutty Delight or Cozy Chocolate, for strong milk drinks Very Nutty. The full selection is under Coffee beans.
No returns
Original spare parts are excluded from exchange and return. They are procured specifically for each order and cannot be resold after installation or trial fitting on the machine. So before ordering, check the model, year of manufacture and serial number of your machine – or drop us a line and we'll clarify the fit together. Your rights in the event of defective goods remain unaffected.
Frequently asked questions
Does this grate fit a 3-group Linea PB?
No. For three groups the number is C.1.237.3. The grates differ in length and are not interchangeable.
What is the difference between C.1.237.2 and the drip tray grate C.1.157.3?
They are two different items for the Linea PB. C.1.237.2 is the flat wire version for two groups, C.1.157.3 a drip tray grate for three groups. How the design differs in detail is not stated in our documentation – if in doubt, the number on your old part decides.
Is the drip tray included?
No, only the grate is supplied. The tray underneath is a separate item.
What are the dimensions of the grate?
The dimensions are not documented to us, so we don't state any. What matters is the number of groups on your machine and the number C.1.237.2.
Can I take a look at the part in your shop?
Our showrooms in Bern (Gerberngasse 44) and Zurich (Hagenholzstrasse 50b) show a wide selection, but not our entire range – the display changes. Drop us a quick line at [email protected] before your visit, and we will check whether the product you have in mind is currently there.
Questions about the fit? Write to us at [email protected]. We deliver across Switzerland and to Liechtenstein in 2-4 working days.
