So the machine stands steady again and nothing wanders
A machine foot does three jobs at once: it carries its quarter of the weight, it keeps the machine level, and it decouples it from the worktop so that the pump doesn’t set half the kitchen vibrating. As long as all four feet do their job, nobody thinks about them.
They only get noticed when one gives way: the machine wobbles, it creeps a little with every shot, or it stands at a slant and the water in the drip tray collects on one side. This listing covers the feet for the Rocket Stone, part number A019907635.
When it’s due
- The machine wobbles or is no longer level, even though the worktop is flat.
- A foot is cracked, dented or has flattened.
- The rubber has hardened – then the pump vibration is transmitted straight to the surface.
- The machine creeps forward a little with every shot.
- A foot has come loose from its thread or is no longer seated firmly.
A slant is not just unsightly: in a machine that isn’t level, the drip tray drains unevenly and the water level in the boiler is read differently from what it actually is.
At a glance
| Type |
Machine foot |
| Installation location |
Underside of the housing |
| Fits |
Rocket Stone |
| Scope of delivery |
the scope depends on the manufacturer’s specification for number A019907635 |
| Part number |
A019907635 |
| Installation |
Installation by a specialist recommended |
| Brand |
Rocket |
The name in the manufacturer’s documentation is in the plural, but how many feet an order includes is not broken down there – so we don’t claim a quantity. Height, diameter and thread size are not specified either. If you need a complete set, drop us a line and we’ll clarify the quantity before you order. There is no dedicated machine category for the Rocket Stone in the shop; you can find the part via the part number and via the Rocket spare parts.
Important for installation
The feet sit on the underside, so the machine has to be lifted or tilted for this. Beforehand, switch it off, unplug it, empty the water tank and drip tray and let the machine cool down – laying a full, hot machine on its side is the quickest way to get water where none should be. We deliberately don’t provide step-by-step instructions here.
Who it’s for
For everyone with a Rocket Stone whose feet have become hard or flat over the years. And for everyone who has taken over a used machine that is missing a foot or where one has been replaced with something non-original.
Goes well with
From our workshop in Bern and Zürich
We level every machine we set up with a small spirit level – across and lengthwise, on the top cover of the housing, not on the drip tray. That isn’t a manufacturer requirement, but it’s the difference between a drip tray that drains cleanly and one that always has some water left standing. New feet are the right moment for this, because you’re already under the machine anyway.
And afterwards: pull a shot and see whether the machine stays steady. We use Nutty Delight for this, because it’s our benchmark anyway; for something milder, try Cozy Chocolate, for something stronger, Very Nutty. All in our coffee beans.
Returns excluded
Original spare parts are excluded from exchange and return. They are sourced specifically for each order and cannot be resold after installation or a trial fitting on the machine. So before ordering, check the model, year of manufacture and serial number of your machine – or drop us a line and we’ll check the fit together. Your rights regarding defective goods remain unaffected.
How many feet do I get?
The quantity is not broken down in the documentation for this number. We won’t guess it – drop us a line if you need a complete set and we’ll clarify it before you order.
What height and what thread do the feet have?
That isn’t documented either. Please order using part number A019907635.
Why is there no category for the Stone?
In our category structure, the Stone is not a separate machine model. The part can be found via the part number and via the Rocket spare parts.
Is this an electrical part?
No. A purely mechanical part on the underside of the housing.
Can I look at the part in your showroom?
Yes. We are in Bern at Gerberngasse 44 and in Zürich at Hagenholzstrasse 50b. Bring your machine’s serial number and we’ll put the part next to it.
Questions about fit? Write to us at [email protected]. We deliver across Switzerland and to Liechtenstein in 2–5 working days.
