Temperature Stripe - High or Low

Purchase our High Temperature Strip , which has a range of 70 to 100°C, to ensure your brew head is preheated before adding your brew water.

At the same time, you can purchase a low temperature strip that covers a range of 25 to 65°C to ensure the milk in your frother or steamer has reached the optimum point for latte art.

You can also combine the temperature strips, as shown in the product image, to achieve a larger temperature range that you can visualize.

Take control of your brewing processes and improve the repeatability of your tasty shots by attaching these easy-to-use and easy-to-read temperature strips to your brew heads and steamers!

Included is one (1) customizable temperature strip. The dimensions are approximately 5.7 x 1.3 cm.

*Before application, ensure surface is clean and dry. During application, ensure the strip is lying flat on the cylinder face or other surface and that there are no gaps or air pockets for water to penetrate between the surface and the strip.

As the display warms up to the response temperature, the window starts out as a tan or reddish-brown color and continues to change to green.

TAN window overlays actual temperature reading
GREEN window shows actual temperature
BLUE window is below actual temperature reading

Moisture Resistant: Self-adhesive backing
Estimated shelf life of adhesive: 2 years but may vary depending on application and use.

Buy our High Heat Temperature Strip , with a range of 158 to 212°F / 70 to 100°C to ensure that your brew head is preheated prior to adding your brew water.

Similarly, buy a Low-Heat Temperature Strip , with a range of 77 to 149 °F / 25 to 65 °C to ensure that the milk in your frother or steamer has reached the optimal point for latte art.

Take control of your brew and improve repeatability of your tasty shots by placing these easy to use, easy to read temperature strips on your brew heads and steamers!

Comes with one (1) customizable temperature strip. Dimensions are 2.25 x .5 inches.

*Prior to application, ensure surface is clean and dry. During application, ensure that strip lays flat across face of cylinder or other surface and that no gaps or air pockets are present where water could seep in between surface and strip

As the gauge warms to the response temperature, the window starts with a tan or reddish-brown and continues to change to green.