Subminimal NanoFoamer PRO Gen-2 Lid Kit – Lid with Height-Adjustable Impeller
One click on the lid, and the vortex in the jug suddenly sounds calmer: the milk spins quietly and turns silky.
The Gen-2 Lid Kit consists of the lid of the NanoFoamer PRO Gen-2 and the height-adjustable shaft that carries the impeller. According to Subminimal, it fits both the first- and the second-generation NanoFoamer PRO.
What the impeller height changes
In the NanoFoamer PRO, the impeller is driven contact-free by magnets. How high it sits in the jug shapes the vortex: set higher, it opens the vortex, more milk flows through the NanoScreen and a little more foam is created. Set lower, the vortex closes and there is slightly less foam – ideal for small amounts of milk, according to Subminimal.
Adjustment is in steps of 0.4 mm per click, counterclockwise to raise and clockwise to lower. What you are looking for is the point where the impeller runs smoothly and the milk turns silky. If it sits too high, it can lose its magnetic coupling and audibly spin up; in that case, set it a little lower and start again. If you hear it touching the bottom, raise it a little straight away to protect the non-stick coating.
For finer foam in small drinks, a lower setting is worthwhile; for plant-based drinks that are harder to froth, a higher one. This is fine-tuning, not a must. Every milk and every morning is a little different, and that is exactly where the appeal lies. Our opinion is one of many.
At a glance
| Contents |
Gen-2 lid, height-adjustable Gen-2 shaft |
| Compatible with |
Subminimal NanoFoamer PRO Gen-1 and Gen-2 |
| Adjustment |
0.4 mm per click |
| Direction |
counterclockwise higher, clockwise lower |
| Effect |
higher: more open vortex, a little more foam; lower: more closed vortex, a little less foam |
| Care |
rinse the impeller and Magnetic NanoScreen right after use; according to the user manual, no parts in the dishwasher |
| Brand |
Subminimal |
Who it is made for
For everyone with a NanoFoamer PRO who wants to replace the lid, fit a first-generation device with the adjustable shaft, or fine-tune the amount of foam to their drink.
As Subminimal's importer, we also carry the complete Gen-2 upgrade with jug and lid, the Flow Controllers and the Magnetic NanoScreen – all in our Subminimal Collection, to buy in Switzerland online or in person in Bern and Zurich.
What goes with it
According to Subminimal, the NanoFoamer PRO is built so that you can pour latte art straight from the jug. For delicate patterns, pour the milk into a pitcher: affordable and precise with Normcore, with more shapes and coatings with Rhino, both among our barista milk pitchers.
And while the milk is running, the espresso is being made. For those who want it affordable and by hand: the manual lever machines from our Flair Espresso Collection. If you would like an espresso machine with a steam wand, have a look at our coffee machines. Nobody needs the more expensive one – you either want it or you don't.
Frequently asked questions about the NanoFoamer PRO Gen-2 Lid Kit
Does the Gen-2 Lid Kit fit my first-generation NanoFoamer PRO?
Yes. According to Subminimal, the lid is compatible with the first-generation NanoFoamer PRO and with Gen-2. This way, a first-generation device can also get the height-adjustable shaft.
What is the difference from the Gen-2 Upgrade Kit?
The Lid Kit includes the lid and the adjustable shaft. The Upgrade Kit contains the complete jug with lid and is used with your existing base and existing Flow Controllers.
How do I adjust the impeller height?
In steps of 0.4 mm per click: counterclockwise to raise, clockwise to lower. The ideal setting is the one where the impeller runs smoothly and the milk turns silky.
Can the Lid Kit go in the dishwasher?
No. According to the user manual, no part of the NanoFoamer PRO belongs in the dishwasher. Rinse the impeller and Magnetic NanoScreen right after use so that no milk dries on.
Can I see the product before buying?
In our showrooms in Bern (Gerberngasse 44) and Zurich (Hagenholzstrasse 50b) we show a large selection, but not the entire range – the display changes. It is best to check with us shortly beforehand whether the part is currently there.
Roastery tip
For us, a silky flat white calls for an espresso with body. Cozy Chocolate and Nutty Delight are our main recommendation for the vast majority: dense, aromatic, with chocolate and nut notes that stay present in the milk. Very Nutty stands for maximum body without any acidity, Wild Peach for everyone who wants to discover a fruity experience. That is our recommendation, one of many.
