La Marzocco bean hopper complete for the Pico – the small grinder's bean supply, sealed again
The Pico is compact, and the bean hopper is the part of it you touch every day. Lid off, beans in, lid on – a routine that goes unnoticed as long as everything closes properly.
If the hopper starts to wobble, shows cracks or the closure no longer holds, the beans are more exposed than they need to be. This replacement restores the original condition without anything else on the grinder having to be touched.
When it's due
The hopper is due for replacement when there are fine cracks in the material, when it no longer sits firmly on the grinder or when the closure no longer shuts properly.
It pays to check first: if only the lid is damaged, the lid alone is enough – we stock it for the Pico as a separate item.
At a glance
| Type |
Bean hopper, complete |
| Installation position |
on top of the grinder, above the burr set |
| Fits |
La Marzocco Pico |
| Scope of delivery |
Bean hopper complete; the exact scope follows the manufacturer's specification for this item |
| Version |
Spare part for the Pico |
| Brand |
La Marzocco |
Who it's for
For anyone with a Pico whose hopper is showing its age. No tools, no work on the grinder itself: lift it off, put the new one on.
Also useful as a second hopper if you regularly switch between two coffees.
We cannot give a part number for this item: our records list it without a number, and we don't make one up. If you have a number from a service document in front of you, send it to us – then we'll compare instead of guessing.
The bean hoppers and their parts in our catalogue
We stock fourteen items around the bean hopper, split into four groups. If you're not sure which version is on your grinder, take the hopper off and send us the model and serial number – we'll check instead of guessing.
Complete bean hoppers from Rocket, three items: Bean hopper complete for the Rocket Faustino at CHF 69.30; Bean hopper complete for the Rocket Fausto at CHF 89.75; Bean hopper complete for the Rocket Faustino V2 at CHF 74.65.
Complete bean hoppers from La Marzocco, four items: Bean hopper complete for the La Marzocco Pico at CHF 111.54 – that is, this product; Bean hopper complete for the La Marzocco Swift Mini at CHF 240.68; Bean hopper complete for the La Marzocco Jay, part number 1074 at CHF 205.92; Bean shutter kit with bean hopper from La Marzocco, part number C.1.513.R at CHF 115.39.
Bean hopper lids, four items: Bean hopper lid for the Rocket Faustino V2 at CHF 21.55; Bean hopper lid for the La Marzocco Pico at CHF 23.21; Bean hopper lid for the La Marzocco Jay, part number C.2.091.R at CHF 33.66; two-piece bean hopper lid from La Marzocco, part number F.1.177 at CHF 38.39.
Slide gates and seal rings on the hopper, three items: Bean hopper slide gate for the Rocket Faustino V2 at CHF 4.95; Bean hopper rubber ring for the Rocket Faustino, part number R8G4996889 at CHF 11.00; Bean hopper rubber seal ring for the Rocket Fausto, part number R8G4995938 at CHF 8.80.
Not part of this series, but on the same path the beans take: the coffee chute of the La Marzocco Jay, through which the ground coffee exits after the burr set, and the 0.2 mm flap for the Jay. Both sit below the burr set and have nothing to do with the bean supply.
What goes with it
For the Pico there is the bean hopper lid, the conical burrs 39 mm and, in the newer version, the Set New F.
For a mechanical overhaul we stock the drive belt rebuild kit and the adjusting gear.
The matching category is La Marzocco Pico and Swift spare parts, alongside Accessories and spare parts La Marzocco and the Service parts. For care: grinder cleaning with Puly Grind.
Workshop tip from Bern and Zurich
With the Pico, we always check the grind setting in the workshop after changing the hopper: removing and refitting the hopper doesn't change anything by itself, but two test shots tell you straight away whether the grinder is still where you had it. Two shots cost less than a ruined morning. Our routine from Bern and Zurich, not a manufacturer requirement. For the beans up top, in the workshop we reach for Nutty Delight and Cozy Chocolate, and for maximum body without acidity for Very Nutty; the full selection is in our coffee beans.
Returns excluded
Service parts are excluded from exchange and from return. They are procured specifically for each order and cannot be resold after installation or a test fitting on the machine. So before ordering, check the model, year of manufacture and serial number of your machine – or drop us a quick message and we'll clarify the fit together. Your rights in the case of defective goods remain unaffected.
Frequently asked questions
Does this bean hopper also fit other La Marzocco grinders?
The item name refers to the Pico. We stock separate hoppers for the Swift Mini and for the Jay, and our records don't say whether a version fits beyond that.
How much does the hopper hold?
Our records for this item don't state a capacity. That's why we don't give a figure in grams.
Do I have to buy the whole hopper if only the lid is broken?
No. We stock the lid for the Pico as a separate item, and it costs a fraction of the hopper.
What is the part number for this item?
We don't know it. Our records list this item without a part number, and we don't write down one we can't verify. Send us the number from your service documentation and we'll confirm the fit.
Can I look at the part in your showroom?
Yes. In Bern at Gerberngasse 44 and in Zurich at Hagenholzstrasse 50b, service parts are on hand, and we'll check together with you whether the version fits your grinder.
Not sure whether the part fits your grinder? Write to us at [email protected] with the model and serial number, and we'll check the fit together. We deliver across Switzerland and to Liechtenstein in 2-4 working days.
