La Marzocco coffee chute for the Jay grinder – the last stretch of the grounds
Between the burrs and the filter basket lies a short, underestimated stretch. The chute guides the freshly ground coffee downwards in a focused stream. If it is intact, the dose drops compactly into the centre of the basket. If it is damaged or warped, the grounds scatter onto the rim, the rest and the counter – and every gram that misses is a gram missing from your espresso.
The chute is both a wear part and a part prone to accidental damage. Over the years it absorbs coffee oil and fines, and it is the spot where a tool is most likely to slip during cleaning. One crack, one broken tab, and the guidance is no longer right.
When it is due
When the grounds no longer fall into the centre of the portafilter, when the chute no longer sits properly or wobbles, when cracks, chips or broken mounting points are visible, or when ground coffee gets stuck in a recess and can no longer be removed. A permanently dirty chute passes old coffee oil on to every fresh dose – and you can taste it.
At a glance
| Type |
Coffee chute, outlet part on the grinding mechanism |
| Location |
Grinder outlet |
| Fits |
La Marzocco Jay grinder |
| Scope of delivery |
one coffee chute |
| Part number |
C.1.828 |
| Brand |
La Marzocco |
Who it is for
For cafés and workshops with a Jay in use where the dose no longer lands cleanly in the basket – and for anyone who, during a grinder service, replaces the parts in the coffee path at the same time while the grinder is open anyway.
What goes with it
For the same grinder there is the bean hopper lid and the complete bean hopper for the Jay. You will find the grinder itself as the La Marzocco Jay. To clean the grinding mechanism, we use Puly Grind Verde. More under Coffee grinder accessories and spare parts and Service parts.
Tip from our workshop
We brush the chute out dry every day and keep water well away from it. Moisture in the coffee path turns fines into paste, and that sticks exactly where you can no longer get it out. Once a week we take it off and brush the outside too. This is our routine from Bern and Zurich, not a manufacturer specification. Afterwards we dial in with Nutty Delight, for chocolatey notes with Cozy Chocolate, for body with Very Nutty. All roasts under Coffee beans.
No returns
Service parts are excluded from exchange and return. They are sourced specifically for each order and cannot be resold once they have been installed or test-fitted on the machine. So before ordering, check the model, year of manufacture and serial number of your machine – or drop us a line and we will clarify the fit together. Your rights in the case of defective goods remain unaffected.
Frequently asked questions
Does the chute also fit other La Marzocco grinders?
Our documentation lists it for the Jay. For another grinder, send us the serial number and we will check the fit before you order.
Why does my grinder scatter grounds next to the portafilter?
Often it is due to a damaged or poorly seated chute, sometimes also to static charge with very dry coffee. First check whether the chute is secure and undamaged.
Can I wash the chute in the sink?
We advise against it. In the coffee path we work dry with a brush and a fine brush – water binds the fines and makes things worse.
Are screws or seals included?
The scope of delivery is the chute. If you also need small parts, send us the part number from your service documentation.
Can I see the part in the showroom?
Our showrooms in Bern (Gerberngasse 44) and Zurich (Hagenholzstrasse 50b) show a wide selection, but not our entire range – the display changes. Drop us a quick line at [email protected] before your visit, and we will check whether the product you have in mind is currently there.
Questions? Write to [email protected]. Delivery across Switzerland and to Liechtenstein in 2-4 working days.
