The ring sits centred – and the grinding mechanism runs true
On the SWAN, the centring determines whether the conical burrs have the same gap all the way round. If the ring is even slightly off centre, one side grinds finer than the other. In the cup this shows up as an uneven extraction, at the grinder as a noise that was not there before.
This plate holds the ring in position during reassembly until it is screwed down. A small part, but it decides whether the burr change is a success or has to be redone.
When you need it
When reassembling after a burr change on the SWAN, and whenever the grind has remained uneven after a service.
At a glance
| Type |
Centring plate, service tool for the grinding mechanism |
| Location |
Not permanently fitted – used to centre the ring during reassembly |
| Fits |
La Marzocco SWAN. We do not have a separate model section for the SWAN – send us the serial number and we will check the fit. |
| Scope of delivery |
One centring plate |
| Part number |
UT371 |
| Specification |
Our documentation gives no details on material or dimensions |
| Brand |
La Marzocco |
The tools in our catalogue
Tools for the grinder: UT030 for removing the inner burr, UT368 tool set for replacing the Swan burrs, UT369 for removing the outer burr and UT371 centring plate for the SWAN ring – this product.
Tools for the machine: UT018 for fitting the type 2 piston seals LEVA, UT022 puller for the LEVA piston, UT023 for calibrating the KB90 gasket and UT007 for the Linea Mini R and Micra diffuser, plus UT015, UT016, UT017, UT021 and UT024.
Who it is for
For anyone changing the burrs on a SWAN who wants to get the reassembly right the first time.
What goes with it
The same job also involves the conical inner burrs Ø 83 mm, the extruder ring with magnets and the extruder ejector cone. You will find more grinder parts under Accessories and spare parts for coffee grinders and in the Original spare parts section.
From our workshop in Bern and Zurich
We tighten the screws on the ring crosswise, in two passes, and turn the grinding mechanism by hand in between. If it feels stiffer at any point, we loosen them again and start over – our routine, not a manufacturer specification. We then dial in on a Nutty Delight, sometimes on the Cozy Chocolate or the Very Nutty. You will find the full range under Coffee beans.
No returns
Original spare parts are excluded from exchange and return. They are sourced specifically for each order and cannot be resold once they have been fitted or test-fitted on the machine. So before ordering, check the model, year of manufacture and serial number of your machine – or drop us a line and we will check the fit together. Your rights in the event of defective goods remain unaffected.
Frequently asked questions
Why is there no picture?
We do not have a product photo for this item. We would rather show no picture than one from elsewhere that shows something different. Write to us and we will describe the part to you in detail.
Does the plate stay in the grinder permanently?
No. It centres the ring during reassembly and does not stay in the grinder as a component afterwards.
Are burrs or screws included?
No, only the centring plate is supplied.
What material is it made of and how big is it?
We have no information on this, so we do not claim any. The only reliable reference is the part number UT371.
Can I collect the part from your shop?
Yes. We are in Bern at Gerberngasse 44 and in Zurich at Hagenholzstrasse 50b. Just let us know which part you need and we will have it ready for you.
Questions about the fit? Write to us at [email protected]. We deliver across Switzerland and to Liechtenstein in 2-4 working days.
