Rocket lever gasket kit R9 – so the brew closes cleanly again
The lever on the R9 has a sound of its own. A firm pressure point, a brief resistance, then the brew begins. When that point turns soft and the lever feels spongy in your hand, it is rarely the lever itself – but the small gaskets behind it.
This kit contains the gaskets for the lever area of the Rocket R9. They sit in a spot that is moved, heated and cooled down a hundred times a day. There, rubber loses its elasticity, hardens and starts to let water past. Part number S299906075.
When it is due
The kit is due when the lever loses its defined pressure point and feels soft. When water escapes sideways at the group or keeps dripping during the brew, even though the lever is closed. When it keeps running longer than usual after closing. And at the latest when the old gaskets turn out brittle during a service and crack instead of stretching.
At a glance
| Type |
Gasket kit for the lever area |
| Location |
Lever mechanism of the brew group |
| Fits |
Rocket R9 |
| Scope of delivery |
Gasket kit as supplied by the manufacturer |
| Part number |
S299906075 |
| Version |
Gaskets only, without lever and without valve parts |
| Installation |
Installation by a specialist recommended |
| Brand |
Rocket |
Important for installation
The gaskets sit inside the machine at a pressurised point. Before any work, the machine must be unplugged, depressurised and cooled down. We deliberately do not give step-by-step instructions here. The replacement belongs in the hands of a specialist who can dismantle the group, check the sealing seats and then test for leaks.
Who it is for
For businesses with an R9 who plan their annual service and want the wear parts in house beforehand. For technicians who have a leaking group on their list. And for everyone who has noticed a soft lever before their guests do.
What goes with it
During the same job, it is worth taking a look at the gasket kit for the valves of the R9 and at the spring for the coffee brew lever. More parts for Rocket machines can be found in the Rocket accessories and spare parts section, and our full range in service parts and spare parts.
Workshop tip from Bern and Zurich
This is our routine, not a manufacturer specification: we replace lever and valve gaskets in the same pass, even if only one of the two spots was showing problems. The group is open anyway, and starting over two weeks later costs more time than the second set. Afterwards we pull a round of espresso as a check, usually Nutty Delight, because you can taste an uneven brew in it straight away. With milk we use Cozy Chocolate, for strong cups Very Nutty. You will find the whole selection under coffee beans.
No returns
Original spare parts are excluded from exchange and return. They are sourced specifically for each order and cannot be resold after installation or a test fitting on the machine. So before ordering, check the model, year of manufacture and serial number of your machine – or drop us a quick message and we will clarify the fit together. Your rights in the case of defective goods remain unaffected.
Frequently asked questions
Is the lever itself included?
No. The kit contains only the gaskets. Lever, springs and valve parts are separate spare parts.
How often should the gaskets be replaced?
That depends on brew volume and water hardness. Many businesses do it at the annual service, without waiting for the first drip.
Is the kit also suitable for other Rocket models?
It is intended for the R9. Send us the serial number of your machine and we will check the fit before you order.
Can I replace the gaskets myself?
They sit inside the machine at a pressurised point. We recommend installation by a specialist.
Can I see the part at your premises?
Our showrooms in Bern (Gerberngasse 44) and Zurich (Hagenholzstrasse 50b) show a wide selection, but not our entire range – the display changes. Drop us a quick line at [email protected] before your visit, and we will check whether the product you have in mind is currently there.
Questions about the fit? Write to us at [email protected]. We deliver across Switzerland and to Liechtenstein in 2-4 working days.
