The right tool for changing the burrs on the SWAN
The SWAN works with conical burrs that sit on a carrier and a centring. When changing them, it is not force that counts, but that the burrs come out straight and go back in straight – otherwise the grinding mechanism runs out of true and the grind setting drifts.
This set is designed for exactly this job. Once you have used it, you change the burrs in a fraction of the time – and without the uneasy feeling of bending something with a screwdriver that nobody can straighten afterwards.
When you need it
When a burr change is due on the SWAN, when servicing the grinding mechanism, and when the grind setting no longer stays stable or the grinder runs audibly rough.
At a glance
| Type |
Tool set for changing the burrs |
| Location |
Not installed – working tool for the grinding mechanism |
| Fits |
La Marzocco SWAN. We do not have a separate model section for the SWAN – send us the serial number and we will check the fit. |
| Scope of delivery |
The scope follows the manufacturer's specification for number UT368. We do not have a parts list. Burrs are not included. |
| Part number |
UT368 |
| Specification |
Our documentation gives no details on material or dimensions |
| Brand |
La Marzocco |
The tools in the catalogue
Tools for the grinder: UT030 for removing the inner burr, UT368 tool set for replacing the Swan burrs – that is, this product –, UT369 for removing the outer burr and UT371 centring plate for the SWAN ring.
Tools for the machine: UT018 for fitting the piston seals type 2 LEVA, UT022 puller for the LEVA piston, UT023 for calibrating the KB90 gasket, UT007 for the diffuser Linea Mini R and Micra, plus UT015, UT016, UT017, UT021 and UT024.
Who it is for
For businesses with a SWAN and for service companies that offer burr changes as routine work.
What goes with it
The same job also involves the conical inner burrs Ø 83 mm for the SWAN, the extruder ejection cone and the extruder ring with magnets. The grinder itself is listed under La Marzocco SWAN, further parts under Accessories and spare parts for coffee grinders.
From our workshop in Bern and Zurich
On grinders in continuous use, we weigh one grinding run once a month and note the time. If the same amount gradually takes noticeably longer, the burrs are due – long before it shows in the cup. This is our routine, not a manufacturer requirement. Cleaning is done dry with Puly Grind Verde, further products are listed under Machine and grinder cleaning. We dial in on a Nutty Delight, sometimes on the Cozy Chocolate or the Very Nutty. The full selection is listed under Coffee beans.
No returns
Original spare parts are excluded from exchange and return. They are procured to order and cannot be resold once they have been installed or test-fitted on the appliance. So before ordering, check the model, year of manufacture and serial number of your machine – or drop us a line and we will clarify the fit together. Your rights in the event of defective goods remain unaffected.
Frequently asked questions
What is included in the set?
The scope follows the manufacturer's specification for number UT368. We do not have a parts list, so we do not list anything we cannot verify. What is certainly not included are the burrs themselves.
Do I also need UT030, UT369 or UT371?
The four items cover different steps: inner burr, outer burr, Swan set and centring plate. Which ones you need depends on what you are changing – write to us and we will look at it together.
Does it only fit the SWAN?
Our documentation lists it for the SWAN. We cannot verify whether it is suitable for another grinder, so we do not claim it.
What material is it made of?
We have no information on this. The only reliable reference is the part number UT368.
Can I pick up the part from your shop?
Yes. We are in Bern at Gerberngasse 44 and in Zurich at Hagenholzstrasse 50b. Drop us a line saying which part you need and we will have it ready for you.
Questions about the fit? Write to us at [email protected]. We deliver across Switzerland and to Liechtenstein in 2-4 working days.
