A fine, focused steam jet from a short nozzle
The steam nozzle sits at the tip of the wand and shapes the jet that sets the milk in motion. This version is kept short and has a 1,1 millimetre bore, made of stainless steel. If limescale builds up in the fine opening, the clean jet turns into a restless hiss and the foam becomes coarse.
The nozzle carries the number A.5.180. The part number is A.5.180.
Descale first, then replace
Before you replace a nozzle, a thorough descaling and a cleaning of the opening is almost always worthwhile. Very often the jet is back afterwards, and the part lasts for years. You will find suitable products for this in our machine and grinder cleaning range. Only when the bore is permanently clogged or damaged is it time for a replacement.
When it is due
- The foam stays coarse, even after descaling.
- The steam jet is uneven or deflected to the side.
- The bore is visibly clogged.
- The nozzle is damaged or the thread is worn out.
At a glance
| Type |
Steam nozzle Ø1,1 mm, short version, stainless steel |
| Installation point |
At the tip of the steam wand |
| Fits |
La Marzocco machines with a matching steam wand. Tell us the model and serial number. |
| Scope of delivery |
One steam nozzle. Seals and wand are not included. |
| Part number |
A.5.180 |
| Version |
Manufacturer's standard version, stainless steel, short version |
| Brand |
La Marzocco |
Who it is for
For baristas who want a fine, focused jet, and for technicians replacing a scaled-up nozzle.
The steam nozzles in the La Marzocco catalogue
We carry nine steam nozzles in the La Marzocco catalogue, spread across four designs. Which one belongs on your machine is decided by the wand, not the machine model. If you are unsure, send us the serial number and we will check the fit together.
On the classic steam wand: the version with four 1,2 mm holes; the version with four 1,5 mm holes.
On the Cool Touch steam wand: the version with four 1,5 mm holes.
On other wands: the nozzle with four 1,2 mm holes made of PEEK for the Linea Mini R, part number A.6.004; the short 1,1 mm stainless steel nozzle, A.5.180 – i.e. this product; the complete swivelling steam nozzle for the Linea series, T.2.126.
Tips for the Autosteam wand: the Vortex tip Ø 1,3 mm at 45 degrees, F.3.183; the Vortex tip Ø 1,5 mm at 45 degrees, F.3.182; the Tornado tip at 60 degrees, A.5.148.
For none of the nine nozzles do our documents state the thread size or material grade. So we leave this information out rather than guess it.
What goes with it
From our workshop in Bern and Zurich
To descale, we hang the wand vertically in a tall container so that the solution really reaches the nozzle – lying flat, half the bore stays dry. That is our routine, not a manufacturer's specification. Then we pull an espresso with Cozy Chocolate and check that everything is right – more in our coffee beans.
Returns excluded
Original spare parts are excluded from exchange and return. They are sourced specifically for each order and cannot be resold after being installed or test-fitted on the machine. So before ordering, check the model, year of manufacture and serial number of your machine – or drop us a line and we will clarify the fit together. Your rights in the event of defective goods remain unaffected.
How many holes does the nozzle have?
What matters is the 1,1 millimetre bore in the short version. Tell us your machine and we will confirm the right nozzle.
My foam has got worse – does the nozzle have to be replaced?
Not necessarily. First descale thoroughly and clean the opening. That is often enough on its own.
How long does delivery take?
Across Switzerland and to Liechtenstein, usually 2-4 working days.
Can I look at the part at your place?
Yes. We are in Bern at Gerberngasse 44 and in Zurich at Hagenholzstrasse 50b.
Not sure about the fit? Write to us at [email protected]. We deliver across Switzerland and to Liechtenstein in 2-4 working days.
